GE Logiq 9 Service Manual

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 8 Replacement Procedures 8-163
Section 8-43
Rear Crash Bumper Replacement Procedure
8-43-1 Manpower
One person, 30 minutes
8-43-2 Tools
No special tool are needed
8-43-3 Rear Crash Bumper Replacement Procedure
1.) Tear off the bumper.Be aware of the risk of squeezing fingers in Frogleg Assembly.
2.) Remove old glue from the console.
3.) Install new bumper. Use glue adhesive to paint and rubber...

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
8-164 Section 8-44 - Inner Boss Bumper Removal Procedure
Section 8-44
Inner Boss Bumper Removal Procedure
8-44-1 Manpower
8-44-2 Tools
Hexagon key 2,5 mm
8-44-3 Inner Boss Bumper Replacement Procedure
1.) Move Top Console in front position. 
2.) Unscrew 8 hexagon screws.
3.) Replace the bumper.
CAUTIONBe aware of the risk of squeezing fingers in Frogleg Assembly.
Figure 8-170   Frogleg base
Hexagon...

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 8 Replacement Procedures 8-165
Section 8-45
Inner Boss Crash Bumper Replacement Procedure
8-45-1 Manpower
8-45-2 Tools
Hexagon key 2,5 mm
8-45-3 Inner Boss Crash Bumper Replacement Procedure
1.) Move Top Console in front. 
2.) Unscrew 4 hexagon screws.
3.) Remove Bumper brackets.
4.) Replace the bumpers.
CAUTIONBe aware of the risk of squeezing fingers in Frogleg Assembly.
Figure 8-171   Frogleg...

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
8-166 Section 8-46 - Upper and Lower Column Cover Replacement Procedure
Section 8-46
Upper and Lower Column Cover Replacement Procedure
8-46-1 Manpower
2 persons, 3 hours
8-46-2 Tools
• Hexagon key, 10 mm, with torque/momentum controller
• Hexagon keys, 4,5 and 6 mm
• Phillips screwdriver, size 1 and 3
8-46-3 Preparations
1.) Shut down the system as described in Power Off / Shutdown on page 4-3.
2.) Move...

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 8 Replacement Procedures 8-167
Section 8-47
Color Video Printer Replacement Procedure
8-47-1 Manpower
One person, 0,5 hour + travel.
8-47-2 Tools
Long Phillips driver.
8-47-3 Preparations
(click here to view the cover removal video)
Before replacing the UP-D21MD printer: 
- Go to Utility > Peripherals > Printers
- Left click on the printer icon and delete the appropriate icon.
NOTE: Do not delete...

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
8-168 Section 8-47 - Color Video Printer Replacement Procedure
8-47-5 Mounting Procedure
1.) Slide the new printer in place and connect up the cables.
2.) Position the printer and fasten the two straps to secure it in place.
3.) Boot up and test the system.
4.) Ensure that the print keys still function as they did before.
5.) Replace the covers. (click here to view the cover installation video)
Figure...

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 8 Replacement Procedures 8-169
8-47-6 Differences in Replacing the Digital Color Printers
The major differences in the replacement of the Digital Color Printers is the rear panel cabling.
For the Sony UPD-50 there is the power cable, USB cable from USB#5 (C20) and the USB to SCSI 
Adapter.
Dip switches on the back of the UPD-50 are for SCSI termintaion and SCSI ID. 
- SCSI termination is set to...

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
8-170 Section 8-47 - Color Video Printer Replacement Procedure
8-47-6 Differences in Replacing the Digital Color Printers (cont’d)
1.) To remove the Sony UP-D21, unfasten the two screws in the Cover Box and lift it out of the top of 
the system.
2.) Unfasten the Lock Latch and slide the UP-D21 assembly out the left side of the system.
3.) Turn the Color Video Printer upside down.
4.) Detach the printer...

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL 
Chapter 8 Replacement Procedures 8-171
8-47-6 Differences in Replacing the Digital Color Printers (cont’d)
8-47-7 UP-D21 Installation Procedure
1.) Install the mounting plate on the new printer.
2.) On the left side of the System: Slide the UP-D21MD Printer Assembly into the color printer opening.
3.) The Mounting Plate has six Latch Clamps under and one Latch Lock at the rear end. These fit in 
square...

GE MEDICAL SYSTEMSPROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3  LOGIQ™ 9 PROPRIETARYMANUAL   
8-172 Section 8-48 - Black and White Video Printer Replacement Procedure
Section 8-48
Black and White Video Printer Replacement Procedure
8-48-1 Manpower
One person, 30 minutes
8-48-2 Tools
No special tools needed
8-48-3 Preparations
(click here to view the cover removal video)
Before replacing the UP-D895MD printer: 
- Go to Utility > Peripherals > Printers
- Left click on the printer icon and delete...