GE Logiq 7 Service Manual

GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 5-5 - Common Service Platform 5-35
5-5-5 Diagnostics
The Diagnostic page includes various diagnostic tests for troubleshooting.
5-5-5-1 Diagnostic Reports Diagnostic tests return a report to the Service Platform. The platform retains the report and allows for 
future viewing of the diagnostic logs.
5-5-5-2 Proactive Diagnostics A system of self-monitoring is largely supported with the integration of  iLinq. The scheduler,...

GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
5-36Section 5-5 - Common Service Platform
5-5-6 Image Quality
Field is not yet populated.
The Image Quality page contains tools for troubleshooting image quality issues.
5-5-7 Calibration
Field is not yet populated.
The Calibration page is used to calibrate the system.
5-5-8 Configuration
Field is not yet populated.
The Configuration page is used to setup various configuration files on the system.
The Service Platform is used as the...

GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 5-5 - Common Service Platform 5-37
5-5-9 Utilities
The Utilities page contains several miscellaneous tools. These includes access to the problem/solution 
database at the Online center.
5-5-10 Replacement
Field is not yet populated.Figure 5-60   Utilities Page
Figure 5-61   Part Replacement Page 

GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
5-38Section 5-5 - Common Service Platform
5-5-11 PM
Field is not yet populated.
Run the Planned/Preventive/Proactive Maintenance tools during such PM visits as running error logs 
and deleting old test files.
5-5-12 Remote Software/Option Installation and Updates 
The Common Service Platform provides for remote software downloads including A11 downloads to the 
scanner. Any file transferred to the scanner will be in the form of an...

GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 5-5 - Common Service Platform 5-39
5-5-13 InSite II Configuration
5-5-13-1 InSite II Setting (Supported from BT07)
Select Service Platform > Configuration > Questra Agent Configuraion.  Then enter the followings:
NOTE: Refer to Section 8-14 - InSite II Installation for details. Figure 5-63   
Table 5-3   InSite II Entry
ItemDescriptionsModifiable?
Device Name Should be set to Dongle ID. DO NOT MODIFY.
CRM No. FE/OLC Field to...

GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
5-40Section 5-6 - Password
Section 5-6
Password
The following windows request entry of Password. This allows you to be entered into Utility function or 
Service function with different access and security use levels.
5-6-1 For Operator Login Window
When you login the LOGIQ7 application with a different user level, this window is open.
You can modify the user level and password without restraint
 using one of the Utility function (Utility...

GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 5-6 - Password 5-41
5-6-2 For Service Login Window (cont’d)
5-6-3 For Maintenance Access Window
When you login Windows desktop for maintenance access, this window is open.
The user name and password are preset. They can NOT
 be modified..
Figure 5-65   Service Login window
Table 5-5   Password to enter windows desktop
UsernamePassword
No entryAccess is protected with the Service Dongle and a password. 
The password must change at...

GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
5-42Section 5-7 - Air Flow Control
Section 5-7
Air Flow Control
5-7-1 Air Flow Distribution
The four air flow pathes allow the scanner to be cooled down as shown in the figure above.
• Path A (Front lower left > Filter > PC Box > Rear upper left) for PC Box cooling.
• Path B (Front lower left > Filter > LV unit > Rear lower left) for LV unit cooling.
• Path C (Bottom right > Filter > NEST Assy > Rear upper right) for NEST Assy cooling.
•...

GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
Section 5-7 - Air Flow Control 5-43
5-7-3 Fans
The scanner contains the eight fans at the following positions for producing an air flow.
- Two fans: Inside the LV unit for air flow path A and B
- One fan: On the PC Box for air flow path A
- Four fans: At the bottom of the NEST Assy for air flow path C
- One fan: On the HV unit for air flow path D Figure 5-68   Fans
Fan for HV unit
Fan for PC BoxFans for LV unit
Fans for NEST Assy...

GE HEALTHCARE
DIRECTION 2286865, REVISION 14LOGIQ™ 7 SERVICE MANUAL
5-44Section 5-8 - Monitor Video Specification
Section 5-8
Monitor Video Specification
5-8-1 Input
5-8-2 Outputs
5-8-2-1 SVGA
5-8-2-2 TV Format
5-8-2-3 PAL BDGHI
StandardFormatSignalSyncDDCTermination
SVGA 800 x 600 / 75 Hz RGB: 0 - 700 mV H: TTL
V: TTL VESA DDC2 
signals 75 ohms
StandardFormatSignalSyncDDCTermination
SVGA 800 x 600 / 75 Hz RGB: 0 - 700 mV H: TTL
V: TTL VESA DDC2 
signals 75 ohms
TypeStandardsTermination
SVHSNTSC EIA and...