GE Cpv14di018 Manual

							2004/11 – Subject to change – Info 20151
Fieldbus Direct, CPV-CC
Technical data – Fieldbus node CPV-CC
CPV fieldbus node for communication
between a CPV valve terminal and a
higher- order master for Control &
Communication-Link (CC-Link) from
Mitsubishi. The fieldbus node is used
for activation of a CPV valve terminal
with 8 valve slices and 16 solenoid
coils and for displaying the switching
status via LED.
TheCPV-…valvesareactivatedusing
automatic current reduction, which
resultsinlesspowerconsumption
andheatemission.ACPinputmodule
with 16 digital inputs can be
connected via a serial CP string
extension.
TheCPVfieldbusnodeisavailablein
three sizes, with identical
performance characteristics:

CPV10

CPV14

CPV18
Application
Bus connection
The bus connection can be selected
when ordering and is established by
means of:

a terminal strip with IP20
protection

a Sub-D plug with IP65 protection
from Festo

a Sub-D plug with IP20 protection
from other manufacturersAll connection types have the function
of an integrated T-distributor and thus
support the connection of an incoming
and outgoing bus cable.
The integrated interface with RS 485
transmission technology is designed
for the typical CC- Link 3- wire connec-
tion technology (in accordance with
CLPA CC-Link Spec. V1.11).
CC-Link implementation
TheCPVfieldbusnodesupportsone
station per slave. Cyclic data
transmission for the solenoid coils,digital inputs and status information
is conducted using the bit and word
ranges (Rx/Ry/RWr/RWw). 
						

							Info 201 – Subject to change – 2004/1152
Fieldbus Direct, CPV-CC
Technical data – Fieldbus node CPV-CC
General technical data
Ty p eCPV10-GE-CC-8CPV14-GE-CC-8CPV18-GE-CC-8
Part No.197 959197 967197 969
CP string extensionYes
16 inputs (connection of an additional CP valve terminal or CP output module
not possible)
Fieldbus interfaceEither:

Sub- D, 9- pin socket

5-pin screw terminal strip
Baud rates[kbps]156 … 10 000
Set using DIL switch
Addressing range1…64
Set using DIL switch
No. of stations per slave1 station
Permanent setting
Vendor code0x0177
Machine type0x3C
Type of communicationCyclic communication
Configuration support-
Max. no. of solenoid coils16 (Ry)
Max. no. of outputs0
Max. no. of inputs16 (RWr)
LED diagnostic displaysRUNData communication OKgpy
Pow/ErrOperating voltage/CRC error or data communication error
Device-specific diagnosisRemote ready
ParameterisationHold/clear by means of DIL switch
Additional functions8-bit system status in bit range (Rx)
Operating voltageNominal value[V DC]24, reverse polarity protectedpgg
Permissible range[V]20.4 … 26.4
Power failure buffering[ms]20
Current consumption[mA]Max. 200 + sensor supply
Protection class to EN 60 529IP20, IP65 (Sub-D)
ApprovalCE
Temperature rangeOperating[°C]–5 … +50pg
Storage[°C]–20 … +70
MaterialsHousingDie-cast aluminium
Plug capPolyamide, glass fibre (Ultramide)
SealNitrile rubber, Neoprene
DimensionsInfo 213 Valve terminal CPV
WeightInfo 213
Technical data for valvesInfo 213 
						

							2004/11 – Subject to change – Info 20153
Fieldbus Direct, CPV-CC
Technical data – Fieldbus node CPV-CC
Connection and display components
1
5 2
3
4
61Fieldbus connection, 9-pin Sub-D
socket
2Switch module (removable)
3Connection for voltage supply
(4-pin M12 plug, operating
voltage for electronics/sensors,
load voltage for CP valves)
4LEDs:
– Data communication (RUN)
– Operating voltage/error
(Pow/Err)
5CP extension connection
6Switching status displays of CPV
solenoid coils
Pin allocation for Sub-D interface (socket view)
PinSignalDesignation
1n.c.Not connected
2DAData A
3DGData reference potential
4n.c.Not connected
5n.c.FE via RC combination (not used with CC-Link: connection via R/C
combination to FE (1 Mohm/220 nF))
6n.c.Not connected
7CAN_HData B
8n.c.Not connected
9n.c.Not connected
HousingSLDScreen
Pin allocation for terminal strip
PinSignalDesignation
1FGFunctional earthing/housing
2SLDScreen
3DGData reference potential
4DBData B
5DAData A 
						

							Info 201 – Subject to change – 2004/1154
Fieldbus Direct, CPV-CC
Accessories – Fieldbus node CPV-CC
Ordering data
DesignationTy p ePart No.
Power supply
Power supply socket, straightFBSD-GD-718 497
FBSD-GD-918 495
Power supply socket, angledFBSD-WD-718 524
FBSD-WD-918 525
Bus connection Open Style, 5-pin screw terminal strip
Bus connection, 5-pin terminal strip for CC-LinkFBA-1-KL-5POL197 962
Fieldbus plug, Sub-D connectionFBS-SUB-9-GS-2x4POL-B532 220
Mounting screw for standard Sub- D (IP20)UNC 4-40/M3x5340 960
Valve terminal connection
Connecting cable WS-WD0.5 mKVI-CP-1-WS-WD-0,5178 564g
1mKVI-CP-1-WS-WD-1.0191 892
2mKVI-CP-1-WS-WD-2163 139
3mKVI-CP-1-WS-WD-3.0191 893
5mKVI-CP-1-WS-WD-5163 138
Connecting cable GS-WD5mKVI-CP-1-GS-WD-5163 137
8mKVI-CP-1-GS-WD-8163 136
Connecting cable GS-GD2 m, for chain link trunkingKVI-CP-2-GS-GD-2170 234g
5 m, for chain link trunkingKVI-CP-2-GS-GD-5170 235
8 m, for chain link trunkingKVI-CP-2-GS-GD-8165 616
User documentation
UserdocumentationforCPVDirect,CPVfieldbusnodeGermanP.BE-CP-CC-DE197 963
CCEnglishP.BE-CP-CC-EN197 964
JapaneseP.BE-CP-CC-J197 965
Software
CD-ROMValve terminal user
documentation (PDF)P.CD-VALVE-T183 350
UtilitiesP.CD-VI-UTILITIES-2533 500 
						

							2004/11 – Subject to change – Info 20155
©Copyright by Festo AG & Co. KG
Whilst every effort is made to ensure
that all dimensions and specifications
are correct, any printers’ errors not
rectified are outside the control of
Festo, who cannot be held responsible
forsame.ForLiabilityandGuarantee
conditions, refer to our standard
”Conditions of Sale”, available on
request from your local Festo office.
All rights reserved, including transla-
tion rights. No part of this publication
may be reproduced or transmitted in
anyformorbyanymeans,electronic,
mechanical, photocopying or other-
wise, without the prior written
permission of Festo AG & Co. KG.
All technical data subject to change
according to technical update. 
						

							Info 201 – Subject to change – 2004/1156
100 % service with 100 % partnership
Welcome to a world of service from
Festo. Customer orientation is not just
oureverydayphilosophy–itisour
launch pad for the future and the
route to success for both our cus-
tomers and ourselves.
Global presence, always close at
hand
– 52 national Festo companies in
constant on-line communication
– A presence in almost 176
countries, with a total of 10,500
staff
– Worldwide networking for consist-
ent standards of consultancy, sales
and service
Personal advice
– Worldwide support provided by
over 1,000 highly-qualified techni-
cal consultantsSoftware service
Electronic catalogue:
Database-supported general cata-
logueonCD-ROMin20languages
and a wealth of advantages:
– Fast reliable product search func-
tions
– Automatic selection of accessories
– Sizing of pneumatic circuits
– Calculation and sizing programs
with direct links to search functions
Take advantage of this genuine alter-
native to our printed catalogue.
Festo Design Tool – provides support
for designers using 2D- and 3D-draw-
ings for CAD systems.
FluidDraw – allows fast and easy
drafting of circuit diagrams, with di-
rect import of data from the electronic
catalogue. 
						

							2004/11 – Subject to change – Info 20157 Info service
– Full product documentation with
detailed technical information
– Attractive regular customer maga-
zines showing useful application
examples and new product in-
formation
– The latest information available via
the Internet at the click of a mouse
from http://www.festo.com
Everything from a single source
– Our catalogue includes over
16,400 products
– All our components are precisely
coordinated
– Drives and drive accessories
– Handling and vacuum technology
– Positioning
– Valves and valve accessories
– Valve terminals and bus systems
– Proportional technology
– Compressed air preparation
– Tubing, fittings, mounting
accessories
– Sensors and pressure switches
– Pneumatic control technology
– Electronic control technology
Customer service
– Telephone advice via hotlines
– Fast on- site service
– Reliable maintenance and com-
plaints serviceSpare parts service
– Short delivery distances thanks to
worldwide local spare-parts service
– Supply from fully stocked Festo
warehouses
– Prompt deliveries of Festo compo-
nents
– For particularly urgent cases, Festo
salesofficesholdstocksofagood
range of almost all accessories and
standard components
Delivery service
– Fast deliveries of catalogue
products ex stock
– Non-standard stroke and special-
design cylinder production (SMS)
in 28 countries
– Fully-automated Customer Service
Center (production and logistics) in
St. Ingbert-Rohrbach, Germany
– Customer Service Center handles
over 7,400 orders comprising
16,000 items every day
– Daily movement of 6,500
crates weighing a total of
50,000 kg
– Direct deliveries to customers
throughout Europe 
						

							Info 201 – Subject to change – 2004/1158
Festo automation components
Important components in our product range
Compressed air preparation

D series service units

MS series service units
Control technology

Individual valve CPE

Valve terminal CPV

Modular valve terminal MPA and electrical
terminal CPX

Smart Positioning Controller SPC200

Controller FEC Standard FC640
Long linear movement

Rodless cylinder DGPL

Electric toothed-belt drive DGE

Standard cylinder DNC and DSNU

Compact cylinder ADVU
Short linear movement

Linear module HMP

Guided drive DFM

Mini slide SLT

Flat slide SLG

Linear module HMPL

Short-stroke cylinder ADVC
Rotary movement

Rotary drive DRQD

Swivel module DSM

Swivel/linear module DSL
Gripping, mechanical…

Precision gripper HGPP

MicrogripperHGWM

Three-point gripper HGD
…or with vacuum

Suction gripper ESG

Vacuum generator VADMI

Vacuum generator VN
Connecting and installing

Basic elements

Screw connectors

Couplings

Fittings and restrictors

Tu b i n g
Checking, counting, sorting

Checkbox family
Further products and details: http://catalog.festo.com or consult your Festo technical advisor. 
						

							2004/11 – Subject to change – Info 20159
Pneumatic Pictograms
Stroke lengthService
Flow rateRepair service
VoltageWorldwide service
ForceHotline
PressureCollection facility
Te m p e r a t u r eDelivery time
DiameterIn stock
VacuumNote
WidthTy p e d i s co n t i n u e d
New
Spare parts service