Fujifilm Camera X30 Owners Manual

Movies are indicated by a   icon during full-frame playback.
Press   to begin playback. Progress is shown in the display.
Viewing Movies
002D0020 003700310020 002D  

Playback in progress ( )Playback paused ( )
Use the selector to 
control playback.
End playback
Adjust speed
Pause playback
End playback
Single-frame advance /rewind
Playback
Press the selector up or down  to adjust the volume; press [MENU/OK] again to resume
playback. Volume can also be adjusted from the setup menu.
Viewing Movies
002D0020 003700320020 002D  

Do not cover the speaker during playback.
Sound is not played back in silent mode.
Playback Speed
Press the selector left or right to adjust playback speed during playback. Speed is shown by
the number of arrows ( or  ).
Viewing Movies
002D0020 003700330020 002D  

The mode dial
Program AE
Shutter-Priority AE
Aperture-Priority AE
Manual Exposure
[ADVANCED SR AUTO]
[AUTO]
[ADVANCED FILTER]
[ADVANCED MODE]
[SCENE POSITION]
[MOTION PANORAMA 360]
Shooting Mode
002D0020 003700340020 002D  

[P] (Program AE)
[S] (Shutter-Priority AE)
[A] (Aperture-Priority AE) [M] (Manual Exposure)
 ([ADVANCED SR AUTO])
([AUTO])
[Filter] ([ADVANCED FILTER]) [Adv.] ([ADVANCED MODE])
[SP1]/[SP2] ([SCENE POSITION])
 ([MOTION PANORAMA 360])
Choose a shooting mode according to the scene or type of subjec t. To choose a shooting mode,
rotate the mode dial to the desired setting.
Aperture and shutter speed can be adjusted using
program shift.
You choose the shutter speed and leave the camera in
charge of aperture....

In this mode, the camera sets exposure automatically. If desired, you can choose different
combinations of shutter speed and aperture that will produce th e same exposure (program shift).
If the subject is outside the metering range of the camera, the  shutter speed and aperture
displays will show “– – –”.
Program AE
002D0020 003700360020 002D  

Program Shift
If desired, you can rotate the command dial to select other combinations of shutter speed and
aperture without altering  exposure (program shift).
Shutter speed
Aperture
The new values for shutter speed  and aperture are shown in yellow.
To cancel program shift, turn the camera off.
Program shift will also be cancelled if a flash mode other than  off is selected.
Program shift is not available when a flash mode other than off is selected or  [AUTO]
is selected for  [DYNAMIC RANGE] .
Program AE...

In shutter-priority AE (mode S), you select the shutter speed and let the camera choose the
aperture.
Shutter speed
Rotate the command dial to c hoose the shutter speed.
If the correct exposure can not be achieved at the selected shu tter speed, aperture will be
displayed in red when the shutter button is pressed halfway.
If the subject is outside the metering range of the camera, the  aperture display will show
“– – –”.
Shutter-Priority AE
002D0020 003700380020 002D  

In aperture-priority AE (mode A), you select the aperture and let the camera choose the shutter
speed.
Aperture
Rotate the command dial to choose the aperture.
If the correct exposure can not be achieved at the selected ape rture, the shutter speed will
be displayed in red when the shutter button is pressed halfway.  Adjust aperture until the
correct exposure is achieved.
If the subject is outside the metering range of the camera, the  shutter speed display will
show “– – –”.
Aperture-Priority AE...

In this mode, you choose both shutter speed and aperture. If desired, exposure can be altered
from the value suggested by the camera.Shutter speed
Aperture
Exposure indicator
Use the command dial an d control ring to set shutter speed and aperture (to choose the functions
performed by the command dial and control ring, press the contr ol ring options button).
Manual Exposure
002D0020 003800300020 002D