Fujifilm Camera X30 Owners Manual

OFFSelf-timer off.
See Also
The Function Buttons  ([Fn] (Function) Buttons)
[SELF-TIMER] (The Shooting Menu)
Using the Self-Timer
002D0020 0031003100310020 002D  

Use the flash for additional lighting when shooting at night or indoors under low light.
Slide the flash pop-up switch to raise the flash.
1. 
Press the selector right ( ).2. 
Using the Flash
002D0020 0031003100320020 002D  

AUTO [AUTO FLASH] [FORCED FLASH]
 [SLOW SYNCHRO]  [COMMANDER]
 [SUPPRESSED FLASH]
Press the selector up or down to 
highlight the desired flash mode and press [MENU/OK] to
select.
The flash fires when required. Recommended in most
situations.
The flash fires whenever a picture is taken. Use for backlit
subjects or for natural coloration when shooting in bright
light.
Capture both the main subject and the background under
low light (note that brightly lit scenes may be overexposed).
A flash mounted on the hot...

Follow the steps below to choose the focus point used when [AREA] is selected for  [AUTOFOCUS
SETTING]  > [AF MODE]  in the shooting menu.
Press the selector down ( [AF]) to view the focus area display.
At default settings, focus-area  display is assigned to the down  button on the selector
(function button 5). For inform ation on choosing the roles assi gned to the function
buttons, see “The Function Buttons”.
The focus area can also be selected using the [AUTOFOCUS SETTING]  option in the
shooting...

Focus frame
Focus point
Focus-Frame Selection
002D0020 0031003100350020 002D  

Use the selector to position the focus frame.
To select the center frame, press [DISP/BACK].
2. 
Focus-Frame Selection
002D0020 0031003100360020 002D  

Rotate the command dial to choose the size of the focus frame.
Rotate the dial left to reduce the frame by up to 50%, right to  enlarge it by up to
150%, or press the cente r of the dial to restore the frame to i ts original size.
Press [MENU/OK]  to select the chosen frame.
3. 
If [FOCUS AREA]  is selected for [SELECTOR BUTTON SETTING]  in the setup menu, the
selector can be used to position  the focus area without first pressing the [AF] button.
See Also
The Function Buttons  ([Fn] (Function) Buttons)...

Rotate the exposure compensation dial to adjust exposure when photographing very bright, very
dark, or high-contrast subjects.
Exposure Compensation
002D0020 0031003100380020 002D  

Choose positive values (+) to increase exposure
Choose negative values (­) to reduce exposure
Exposure Compensation
002D0020 0031003100390020 002D  

The camera focuses and sets exposure for photographs when the shutter button is pressed halfway
and focus (AF) and exposure (AE)  remain locked while the shutter button is kept in  this position.
Use focus and exposure lock to c ompose photographs with off-cent er subjects.
Position the subject  in the focus frame.
1. 
Press the shutter button halfway  to set focus and exposure. The focus frame will turn green.
This process can be repeated as often as desired before the pic ture is taken.
2....