Fujifilm Camera X30 Owners Manual

AUTO
Adjust colors to match the light source.Select  [WHITE BALANCE]  in the shooting menu.
1. 
Press the selector up or down to  highlight the desired option.
White balance adjusted automatically.
Measure a value for white balance.
Choose a color temperature.
For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fluorescent lights.
Use under “warm white”  fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.
Reduces the blue cast...

Press [MENU/OK]. The dialog shown below will be  displayed; use the selector to fine-tune
white balance and press [MENU/OK]  to select, or press [DISP/BACK] to exit without
fine-tuning.3. 
Results vary with shooting condi tions. Play pictures back after shooting to check colors.
Custom White Balance
Color Temperature
Choose   to adjust white balance  for unusual lighting conditions. White balance measurement
options will be displayed; fram e a white object so that it fills the display and press the shutter...

Color temperature is an objective measure of the color of a lig ht source, expressed in Kelvin (K).
Light sources with a color tempe rature close to that of direct sunlight appear white; light sources
with a lower color temperature h ave a yellow or red cast, while those with a higher color
temperature are tinged with blu e. You can match color temperatu re to the light source as shown in
the following table, or choose op tions that differ sharply from the color of the light source to make
pictures...

Adjust color density.
[COLOR]
002D0020 0031003500340020 002D  

Sharpen or soften outlines.
[SHARPNESS]
002D0020 0031003500350020 002D  

Adjust the appearance of highlights.
[HIGHLIGHT TONE]
002D0020 0031003500360020 002D  

Adjust the appearance of shadows.
[SHADOW TONE]
002D0020 0031003500370020 002D  

Reduce noise in pictures taken at high sensitivities.
[NOISE REDUCTION]
002D0020 0031003500380020 002D  

If [2.0×]  is selected, intelligent digital zoom magnifies the image to 2×  while processing it for
sharp, high-resolution results.
Intelligent digital zoom may end when another mode is selected.
Intelligent digital zoom may some times produce lower quality images than optical zoom.
Intelligent digital zoom is not a vailable in continuous mode or during movie recording.
[INTELLIGENT DIGITAL ZOOM]
002D0020 0031003500390020 002D  

Select [ON] to enable advanced anti blur in   mode. When   is displayed, the  camera will
take a series of exposures and combine them to form a single im age, reducing “noise” (mottling)
and blur.
Advanced anti blur takes effect when the flash is off or in auto mode.
[ADVANCED ANTI BLUR]
002D0020 0031003600300020 002D