Epson Stylus Pro 4400 User Manual

Paper Handling281
6
6
6
6
6
6
6
6
6
6
6
6
English
Now, the printer is ready to print. While the printer is printing, 
do not open the top cover. If the top cover is opened while printing 
is in progress, the printer stops printing, and then restarts printing 
when the top cover is closed. Stopping and restarting printing 
may reduce the print quality.
Loading paper into the front manual feed slot
As the printer feeds paper from the front side to the rear side of 
the printer, keep enough space between...

282Paper Handling ❏Load paper with the printable surface up.
❏Paper with a thickness between 0.08 and 1.6 mm can be set in the 
landscape position. However, always set recycled or plain paper in 
the portrait position, regardless of the thickness.
1. Make sure the printer is on and in the READY state.
2. Press the Paper Source   button to select Sheet .
3. Move the paper lever to the released position.
 

Paper Handling283
6
6
6
6
6
6
6
6
6
6
6
6
English
4. Open the top cover.
5. Insert a sheet to where paper is usually ejected.
 

284Paper Handling 6. Pass the paper under the feed roller.
7. Adjust the right side of the paper with the line marked with 
an arrow mark, and also adjust the bottom edge of the paper 
with the line marked with your paper size on the paper tray. 
If your paper size is Letter, A4, or B4, set the paper edge to 
LTR/A4/B4. If your paper size is not listed above, set the paper 
edge to OTHERS.
 

Paper Handling285
6
6
6
6
6
6
6
6
6
6
6
6
English
8. Close the top cover.
9. Move the paper lever to the secured position. The printer 
automatically feeds the paper to the printing position.
Note:
❏If PPR SIZE CHK is set to OFF, REMOVE PAPER appears on the 
LCD. You need to select ON for PPR SIZE CHK on the printer’s 
control panel.
 

286Paper Handling❏If you press the Pause 
 button, the printer starts to feed the 
paper to the printing position immediately.
10. Extend the paper tray and paper tray cover according to the 
paper size. If you do not extend them, the printout may fall.
Note:
Make sure the roll paper support is not raised.
Now, the printer is ready to print. While the printer is printing, 
do not open the top cover. If the top cover is opened while printing 
is in progress, the printer stops printing, and then restarts...

Paper Handling287
6
6
6
6
6
6
6
6
6
6
6
6
English
❏Load paper with the printable surface up.
❏Paper with a thickness between 0.08 and 1.6 mm can be set in the 
landscape position. However, always set recycled or plain paper and 
A4, Letter size, or 8×10 in. paper in the portrait position, 
regardless of the thickness.
1. Make sure the printer is on and in the READY state.
2. Press the Paper Source   button to select Sheet .
3. Hold the left and right edges of the paper. Align the left edge 
of the paper...

288Paper Handling 4. Adjust the length of the paper tray and the paper tray cover 
according to the paper size. If you do not extend them, the 
printout may fall.
Note:
Make sure the roll paper support is not raised.
Now, the printer is ready to print. While the printer is printing, 
do not open the top cover. If the top cover is opened while printing 
is in progress, the printer stops printing, and then restarts printing 
when the top cover is closed. Stopping and restarting printing 
may reduce the...

Maintenance and Transportation289
7
7
7
7
7
7
7
7
7
7
7
7
English
Chapter 7
Maintenance and Transportation
Replacing Ink Cartridges
When the printer’s indicator light is flashing, this indicates that 
the ink is low and you need to obtain a replacement ink cartridge. 
When the indicator light remains on, this indicates that there is 
no more ink and you need to replace the empty ink cartridge. The 
LCD panel also displays INK LOW or INK OUT.
Note:
Even if only one ink cartridge is empty, the printer...

290Maintenance and Transportation 1. Make sure the printer is on. Find out which cartridge needs 
to be replaced, as indicated by the steady or flashing Ink check 
light.
2. Open the ink compartment cover by pushing it.
3. Raise the ink levers to the released position.
Note:
The right ink compartment is available for EPSON Stylus Pro 4800 
only.