Home > Epson > Printer > Epson Stylus Pro 4400 User Manual

Epson Stylus Pro 4400 User Manual

Here you can view all the pages of manual Epson Stylus Pro 4400 User Manual. The Epson manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 271

Paper Handling271
6
6
6
6
6
6
6
6
6
6
6
6
English
For information on the loaded capacity of Epson special media, 
see the following table.
Loading A3 or larger paper in the paper tray
1. Make sure the printer is on and in the READY state.
2. Press the Paper Source   button to select Sheet .
Epson special media Size Loadable capacity in 
the paper tray
Premium Semigloss Photo Paper A4 100
LTR 100
A3 50
Super A3/B 50
Premium Luster Photo Paper LTR 100
A3 50
Super A3/B 50
Photo Quality Ink Jet Paper A4 200...

Page 272

272Paper Handling 3. Extend the paper tray and paper tray cover.
4. Lift up the paper tray cover.
 

Page 273

Paper Handling273
6
6
6
6
6
6
6
6
6
6
6
6
English
5. Pull the paper guide roller up, and then slide the edge guide 
to the left slightly wider than the width of your paper.
6. Clean the inside of the paper tray to remove any dust. Dust 
may affect the print quality.
7. Fan a stack of paper, and then tap it on a flat surface to even 
the edges.
If the paper is curled, flatten it before you load it. If it curls 
excessively and jams frequently, stop using it.
 

Page 274

274Paper Handling 8. Load the sheets with the printable face down and the right 
edge of the paper resting against the right side of the paper 
tray. Make sure the sheets lie flat on the bottom of the tray.
Note:
❏Always set the paper’s short edge first.
❏When you load sheets of paper, make sure to put the edges of the 
paper against the right inner corner of the paper tray; otherwise, 
printing may become misaligned.
❏When you add more sheets of paper to the paper tray, always 
line up the edges of the...

Page 275

Paper Handling275
6
6
6
6
6
6
6
6
6
6
6
6
English
9. Adjust the length of the paper tray and the edge guide 
according to the paper size.
10. Put the paper guide roller down. Make sure the paper guide 
roller is placed on the edge of the paper.
 

Page 276

276Paper Handling 11. Adjust the length of paper tray cover, and then attach it to the 
paper tray.
Note:
Make sure the roll paper support is not raised.
12. If you have extended the paper tray and cover fully, pull the 
paper tray cover extension to support large-size printouts.
Note:
Before printing on cut-sheet media, make sure paper in the paper tray is 
not curled. If it is curled, uncurl it; otherwise, a paper jam may occur.
 

Page 277

Paper Handling277
6
6
6
6
6
6
6
6
6
6
6
6
English
Now, the printer is ready to print. While the printer is printing, 
do not open the top cover. If the top cover is opened while printing 
is in progress, the printer stops printing, and then restarts printing 
when the top cover is closed. Stopping and restarting printing 
may reduce the print quality.
Loading paper smaller than A3 in the paper tray 
1. Make sure the printer is on and in the READY state.
2. Press the Paper Source   button to select Sheet...

Page 278

278Paper Handling 4. Pull the paper guide, and then slide the edge guide to the left 
slightly wider than the width of your paper.
5. Clean the inside of the paper tray to remove any dust. Dust 
may decrease the print quality.
6. Fan a stack of paper, and then tap it on a flat surface to even 
the edges.
If the paper is curled, flatten it before you load it. If it curls 
excessively and jams frequently, stop using it.
 

Page 279

Paper Handling279
6
6
6
6
6
6
6
6
6
6
6
6
English
7. Load the sheets with the printable face down and the right 
edge of the paper resting against the right side of the paper 
tray. Make sure the sheets lie flat on the bottom of the tray.
Note:
❏Always set the paper’s short edge first.
❏When you load sheets of paper, make sure to put the edges of the 
paper against the right inner corner of the paper tray; otherwise, 
printing may become misaligned.
❏When you add more sheets of paper to the paper tray,...

Page 280

280Paper Handling 8. Adjust the length of the paper guide and the edge guide 
according to the paper size.
9. Put the paper guide roller down, and then re-attach the paper 
tray cover.
Note:
❏Make sure the roll paper support is not raised.
❏Before printing on cut-sheet media, make sure paper in the paper 
tray is not curled. If it is curled, uncurl it; otherwise, a paper jam 
may occur.
 
Start reading Epson Stylus Pro 4400 User Manual

Related Manuals for Epson Stylus Pro 4400 User Manual

All Epson manuals