Epson Stylus Pro 4400 User Manual

The Control Panel241
4
4
4
4
4
4
4
4
4
4
4
4
English
Aligning the print head automatically
1. Make sure that paper is loaded in the printer.
Note:
For best results in printing the head alignment pattern, use the same 
media that one you normally use to print your data.
2. Press the Menu 
 button to enter the SelecType mode.
3. Press the Paper Feed   or Paper Feed  button to display 
HEAD ALIGNMENT, and then press the Menu 
 button.
4. When PAPER THKNS appears, press the Menu 
 button.
5. Press the Paper...

242The Control PanelIf you are not satisfied with the result of BI-D ALL alignment, 
try UNI-D. 
You can also align the print head individually by selecting #1, 
#2, or #3. Select an ink dot size from #1 to #3 depending on 
the media you use and the print mode you want to try. The 
table below illustrates which parameter is available for the 
media type and print quality. For Print Quality, refer to the 
printer driver.
EPSON Stylus Pro 4400:
✽ Print Quality A: Speed, B: Quality, C: Draft, D:...

The Control Panel243
4
4
4
4
4
4
4
4
4
4
4
4
English
EPSON Stylus Pro 4800:
✽ Print Quality A: Speed, B: Quality, C: Draft, D: Normal-360dpi, E: Fine-720dpi, 
F: Super Fine-1440dpi, Super Photo-2880dpi
11. Press the Pause  button to return to the READY status.
Media Name Print Quality ✽
Main 
MenuCustom Print Quality
AB CD E F
Photo Quality Ink Jet Paper
Singleweight Matte Paper
Singleweight Matte Paper (line 
drawing)#1 #2 - #1 #2 #3
Enhanced Matte Paper
Archival Matte Paper#2 #3 - #1 #2 #3
Premium...

244The Control Panel
Aligning the print head manually
If you are not satisfied with the result of the automatic head 
alignment, you can perform the head alignment manually. To 
perform head alignment manually, follow the steps below.
1. Press the Menu 
 button to enter the SelecType mode.
2. Press the Paper Feed   or Paper Feed  button to display 
HEAD ALIGNMENT, and press the Menu 
 button.
3. When PAPER THKNS appears, press the Menu 
 button.
4. Press the Paper Feed   or Paper Feed  button to select...

The Control Panel245
4
4
4
4
4
4
4
4
4
4
4
4
English
EPSON Stylus Pro 4800:
EPSON Stylus Pro 4400:
10. After printing is finished, the pattern number and current set 
number are displayed. Select the set that has the smallest gaps, 
and then press the Paper Feed   or Paper Feed  button 
to display the number for that set.
11. Press the Menu 
 button to register the set number. The next 
pattern number appears. Then repeat step 10.
If you are not satisfied with the result of this alignment, press 
the...

246The Control Panel 12. After you set the patterns, press the Pause 
 button to return 
to the READY status.
Making the paper settings
You can register and recall your own paper settings according to 
any media.
The paper settings you can make are:
Registering the settings
To register the paper settings, follow the steps below.
1. Load the paper that you want to check.
2. Press the Menu 
 button to enter the SelecType mode.
3. Press the Paper Feed   or Paper Feed  button to display 
CUSTOM PAPER.
4....

The Control Panel247
4
4
4
4
4
4
4
4
4
4
4
4
English
If you use Epson special media, select STANDARD, and then go 
to the step 9. You do not need to make the paper thickness 
setting because STANDARD automatically determines the paper 
thickness.
6. Press the Menu 
 button to display PLATEN GAP, and then 
press the Paper Feed   or Paper Feed   button to select 
NARROW, STANDARD, WIDER, WIDE, or WIDEST.
7. Press the Menu 
 button to save the selected platen gap 
setting, and THICKNESS PAT appears on the...

248The Control Panel 13.PPR FEED ADJ appears. Press the Paper Feed   or Paper 
Feed  button to set the paper feed amount, and then press 
the Menu 
 button.
14.EJECT ROLLER appears. Select AUTO, SHEET, ROLL CURLED, or 
ROLL NORMAL, and then press the Menu 
 button.
15.DRYING TIME appears. Press the Paper Feed   or Paper 
Feed  button to select the time in seconds, and then press 
the Menu 
 button. 
16.SUCTION appears. Press the Paper Feed   or Paper Feed   
button to select STANDARD, -1, -2, -3, or -4....

The Control Panel249
4
4
4
4
4
4
4
4
4
4
4
4
English
5. Press the Menu  button. If you select No. X, the number 
you selected appears on the LCD.
6. Press the Pause 
 button to exit the SelecType mode.
Printing a status sheet
In the SelecType mode, you can print a status sheet to see the 
current SelecType default values. To print a status sheet, follow 
the steps below.
1. Make sure that paper is loaded in the printer.
2. Press the Menu 
 button to enter the SelecType mode.
3. Press the Paper Feed   or...

250The Control Panel 1. Press the Menu 
 button to enter the SelecType mode.
2. Press the Paper Feed   or Paper Feed   button to display 
PRINTER SETUP, and then press the Menu 
 button.
3. Press the Paper Feed   or Paper Feed   button to display 
ROLL COUNTERor SHEET COUNTER, and then press the Menu 
 
button.
4. Press the Paper Feed   or Paper Feed  button to select 
the length of the roll paper (between 5 and 99.5 m or 15 and 
300 ft) or the number of cut-sheet paper (between 10 and 250) 
set in the...