Epson Projector PowerLite Pro Cinema LS10000 User Manual

2. To turn the picture back on, press the
Blankbutton again.
Parent topic: Adjusting Projector Features
Locking the Projectors Buttons You can lock the buttons on the projectors control panel to prevent anyone from using the projector.
Note:You can use the remote control to control the projector when the control panel buttons are locked.
1. Press the Menubutton.
2. Select the Settingsmenu and press Enter.
3. Select the Lock Settingsetting and press Enter.
4. Select one of these lock types and press...

You see a confirmation prompt.
5. Select Yesand press Enter.
6. Restart the projector for the lock settings to take effect.
Unlocking the Projectors Buttons
Parent topic: Adjusting Projector Features
Related references
Projector Feature Settings - Settings Menu
Unlocking the Projectors Buttons If the projectors buttons have been locked, hold the Enterbutton on the projectors control panel for
seven seconds to unlock them.
Parent topic: Locking the Projectors Buttons
Saving Settings to Memory and Using...

You see this screen:
5. Select one of the following options: •Load Memory: Overwrites your current settings with saved settings
• Save Memory: Saves your current settings to memory (10 memories with different names are
available)
Note: A memory name that has already been used is indicated by a green mark. Saving over a
previously saved memory overwrites the settings with your current settings.
• Erase Memory: Erases the selected memory settings
• Rename Memory: Renames a saved memory
6. Press Escto...

1. Turn on the projector and display an image.
2. Adjust the focus, zoom, and lens shift settings.
3. Press the
Menubutton.
Note: You can also press the Memorybutton on the remote control to access the Memory menu
directly.
4. Select the Memorymenu and press Enter.
You see this screen:
5. Select one of the following options: •Load Lens Position: Overwrites your current settings with saved settings
Note: You can load the saved settings from Memory1orMemory2 by pressing the Lens1or
Lens2 buttons on the...

•
Erase Lens Position: Erases the selected memory settings
• Rename Lens Position: Renames a saved memory (12 characters maximum)
6. Press Escto exit.
Parent topic: Adjusting Projector Features
85 

Using WirelessHD
You can use the included WirelessHD transmitter to wirelessly stream HD content from a video device to
the projector(PowerLite Pro Cinema LS9600e).
WirelessHD Transmission Range
WirelessHD Remote Control Operation
Connecting the WirelessHD Transmitter
Viewing WirelessHD Content
Switching WirelessHD Sources
Using the WirelessHD Picture in Picture Feature
WirelessHD Transmission Range The WirelessHD Transmitter must be placed within the distance and angles shown here. Make sure the
front...

Vertical (inverted on ceiling)
1 16 feet (5 m)
2 32 feet (10 m)
3 45°
4 50°
Horizontal (when WiHD Mode is set to Full)
87   

1 16 feet (5 m)
2 32 feet (10 m)
3 70°
4 50°
Horizontal (when WiHD Mode is set to Dynamic)
1 16 feet (5 m)
2 32 feet (10 m)
3 85°
4 60°
When positioning the WirelessHD transmitter, note the following:
• The wireless transmission range varies depending on the placement and material of the furniture and walls. The values provided here are for your reference only.
• The projector cannot communicate through walls.
• Place the WirelessHD transmitter on a wooden shelf or other location that does not block the...

• The antennas are built into the front of the projector and the transmitter. Make sure the antennas face
each other when setting up the devices.
• When checking the signal, place the projector and WirelessHD Transmitter close to each other and make sure there are no other projectors operating nearby.
• Depending on the signal strength, the images color information may be automatically discarded to avoid any interruptions and maintain a constant connection. To avoid any deterioration in image
quality,...

Horizontal
1 13 feet (4 m)
2 32 feet (10 m)
3 ± 40°
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or
the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.
Parent topic: Using WirelessHD
Connecting the WirelessHD Transmitter You can connect up to five HDMI input sources and one HDMI output source to your WirelessHD
transmitter.
90