Epson Projector PowerLite Pro Cinema LS10000 User Manual

To change settings for an input source, make sure the source is connected and select that source.
Setting OptionsDescription
3D Setup 3D DisplaySelects various 3D options for 3D
image sources
2D-to-3D Conversion
3D Display: enables 3D mode
3D Format
2D-to-3D Conversion: converts
3D Depth
2D images to 3D
Diagonal Screen Size
Note:When using 2D-to-3D
Inverse 3D Glasses
Conversion, set3D Formatto
3D Viewing Notice Autoor2D.
3D Format: selects the 3D
format
3D Depth: sets the depth for the
3D image
Diagonal...

Setting
OptionsDescription
Sync. Varying levels available Adjusts signal to eliminate
fuzziness or flickering in
computer images; for best
results, adjust theTracking
setting before adjusting the Sync
setting to improve the accuracy
of the adjustments.
Position Up, down, left, rightAdjusts the image location on the
screen
Deinterlacing OffSets whether to convert
interlaced-to-progressive signals
Video
for certain video image types
Film/Auto Off: for fast-moving video images
Video: for most video images...

Setting
OptionsDescription
Super-resolution/4K (PowerLiteOff Sharpens blurred images
Pro Cinema LS10000) resulting from increasing
1 to 5
resolution
4K-1 to4K-5
Super-resolution (1to 5);
reduces blurring when the image
resolution is increased to
1920 × 1080
4K Enhancement ( 4K-1to4K-5);
projects 4K images
(3840 × 2160), employing super-
resolution processing to create
ultra-high-definition video images
Cannot be set when a 4K or
computer image is selected
Detail Enhancement RangeEnhances details to...

Setting
OptionsDescription
Advanced Noise ReductionNoise Reduction: reduces
flickering in analog images in
Setup Level
three levels
Overscan Setup Level: adjusts the level at
HDMI Video Range which dark areas of the image
are rendered black; leave this
Image Processing
setting at 0% for most video
equipment; check your video
equipment specifications to verify
the correct setting
Overscan: changes the
projected image ratio to make the
edges visible by a selectable
percentage or automatically
HDMI Video...

Projector Feature Settings - Settings Menu
Options on the Settings menu let you customize various projector features.
Setting OptionsDescription
Keystone Varying levels available Adjusts vertical image shape to
rectangular
105 

Setting
OptionsDescription
HDMI Link Device ConnectionsAdjusts the HDMI Link options
that allow the projector remote to
HDMI Link
control HDMI-connected devices
Power On Link that support the CEC standard
Power Off Link Device Connections: lists the
devices connected to theHDMI1
and HDMI2 ports
HDMI Link: enables or disables
the HDMI Link function
Power On Link: controls what
happens when you turn on the
projector or a linked device
• PJ -> Device orBidirectional:
turns on the linked device
when the...

Setting
OptionsDescription
WirelessHD Device ConnectionsDevice Connections: displays a
list of available WirelessHD
(PowerLite Pro Cinema WirelessHD
devices
LS9600e) Reception
WirelessHD: controls whether
WiHD Mode the projector receives
WirelessHD signals
Reception: displays the strength
of the WirelessHD signal
WiHD Mode: adjusts the
WirelessHD signal strength and
range
•Full: uses the maximum video
bandwidth at all times
• Dynamic: provides extended
signal range while adjusting
the video bandwidth in...

Setting
OptionsDescription
User Button 2D-to-3D ConversionAssigns a menu option to the
Userbutton on the remote
(PowerLite Pro Cinema 3D Depth
control for one-touch access
LS10000) Inverse 3D Glasses
Power Consumption
Detail Enhancement
Info
Picture in Picture See the list of available Picture in Adjusts the size and location of
Picture optionsthe sub-screen, swaps sources
and exits Picture in Picture mode
108 

Setting
OptionsDescription
Operation Direct Power OnSelects various operation options
Sleep Mode Direct Power On: lets you turn
on the projector without pressing
Illumination
the power button
Trigger Out Sleep Mode: automatically
High Altitude Mode places the projector in standby
mode after an interval of inactivity
Lens Adjustment Mode
Illumination: turns off the lights
on the projector
Trigger Out: outputs a DC 12V
signal from the 3.5 mm mini-jack
Trigger Out 1andTrigger Out 2
ports whenever the...

Setting
OptionsDescription
Display Menu PositionSelects various display options
Menu Color Menu Position: adjusts the
location where the menu is
Messages
displayed
Display Background Menu Color: selects the color of
Startup Screen the menu
Standby Confirmation Messages: controls whether
messages are displayed on the
screen
Display Background: selects
the screen color or logo to
display when no signal is
received
Startup Screen: controls
whether a special screen
appears when the projector starts
up...