Epson Projector PowerLite Pro Cinema LS10000 User Manual

Power light Status light Laser light Temp light Status and solution
Off
Flashing blue Orange Off Laser has a problem or failed to turn
on
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug the projector and contact Epson for
help
Off Flashing blue Off Flashing A fan or sensor has a problem; turn
orange the projector off, unplug it, andcontact Epson for help
Off Flashing blue Flashing Flashing Cinema filter, static...

Solving Image Problems
Check the solutions in these sections if you have any problems with projected images.
Solutions When No Image Appears
Solutions When No Signal Message Appears
Solutions When Not Supported Message Appears
Solutions When Only a Partial Image Appears
Solutions When the Image is Not Rectangular
Solutions When the Image Contains Noise or Static
Solutions When the Image is Fuzzy or Blurry
Solutions When the Image Brightness or Colors are Incorrect
Solutions to Panel Alignment Problems...

• For images projected from applications using Windows DirectX, turn off DirectX functions.
Parent topic:
Solving Image Problems
Related references
Input Signal Settings - Signal Menu
Solutions When No Signal Message Appears If the No Signal message appears, try the following solutions:
• Press theSourcebutton on the projector repeatedly to cycle through the available sources. Wait a
few seconds for an image to appear.
• Turn on the connected computer or video source, and press its play button to begin...

Parent topic:
Solutions When No Signal Message Appears
Displaying From a Mac Laptop If you see the No Signal message when you display from a Mac laptop, you need to set up the laptop
for mirrored display. (See your laptop manual for details.)
1. Open theSystem Preferences utility and selectDisplays.
2. Click the Arrangement tab.
3. Select the Mirror Displays checkbox.
Parent topic: Solutions When No Signal Message Appears
Solutions When Not Supported Message Appears If the Not Supported message appears,...

Related tasks
Changing the Image Aspect Ratio
Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular, try the following solutions:
• Place the projector directly in front of the center of the screen, facing it squarely, if possible.
• Adjust the image shape using the Keystonemenu setting.
Parent topic: Solving Image Problems
Related tasks
Adjusting Keystone with the Control Panel
Solutions When the Image Contains Noise or Static If the projected image seems to...

Solutions When the Image is Fuzzy or Blurry
If the projected image is fuzzy or blurry, try the following solutions:
• Adjust the image focus.
• Check the lens for condensation.
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the
projector warm up to room temperature before using it.
• Position the projector close enough to the screen, and directly in front of it.
• If you are projecting from a computer, use a lower resolution.
• Turn off any keystone...

Projector Feature Settings - Settings Menu
Related tasks
Changing the Color Mode
Solutions to Panel Alignment Problems If the panel alignment does not result in a satisfactory picture, try the following solutions:
• Make sure the Projectionsetting matches the installation position.
• Make sure the projection surface is not colored or textured. Project on a white surface with no texture.
• Leave the projector on for a while before making adjustments to the panel alignment.
• The projected image size...

• Make sure your 3D glasses are paired with the projector.
• Adjust the
3D Depthsetting on the Signal menu.
• Make sure you are within the 3D viewing range.
• Avoid using the projector near wireless networks, microwave ovens, 2.4 GHz cordless phones, or other devices that use the 2.4 GHz frequency band. These devices can interfere with the signal
between the projector and the 3D glasses.
• If the other solutions do not not solve the problem, change the Inverse 3D Glassessetting on the
Signal menu. Return...

Solving Projector or Remote Control Operation Problems
Check the solutions in these sections if you have problems operating the projector or remote control.
Solutions to Projector Power or Shut-Off Problems
Solutions to Problems with the Remote Control
Parent topic:Solving Problems
Solutions to Projector Power or Shut-Off Problems If the projector does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:
• Make sure the power cord is securely connected to...

• Make sure you are operating the remote control within the reception angle and range of the projector.
• Make sure the projector is not warming up or shutting down.
• Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release
the button to wake the remote control up.
• Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the projectors remote receivers. Dim the lights or move the projector away from the sun or...