Epson Projector PowerLite Pro Cinema LS10000 User Manual

1. Plug the AC adapter into the AC input port on the WirelessHD transmitter and into an electrical
outlet.
2. Connect HDMI cables to your video devices and to the HDMI input ports on the side and back of the WirelessHD transmitter.
Note: You can connect an MHL-compatible smartphone or tablet to the HDMI 5 / MHL (IN)port on
the WirelessHD Transmitter.
91   

3. To use the WirelessHD transmitter as a pass-through device to a television or other display, connect
an HDMI cable to the display device and to the HDMI (OUT)port on the back of the transmitter.
Parent topic: Using WirelessHD
Viewing WirelessHD Content You can project content wirelessly from any device connected to the WirelessHD transmitter.
1. Turn on the video equipment or computer you connected to the transmitter and want to project from.
2. Press the power switch on the side of the transmitter to...

Switching WirelessHD Sources
If you have connected multiple HDMI input sources to your WirelessHD transmitter, you can use the
projector remote control to switch between sources.
1. Aim the remote control at the WirelessHD transmitter.
2. Press theInputbutton on the remote control or the WirelessHD transmitter.
You see this screen:
3. Press the Inputbutton repeatedly to highlight different input sources.
4. When you have highlighted the source you want to switch to, release the Inputbutton.
After a few...

Using the WirelessHD Picture in Picture Feature
If you have connected multiple video sources to the WirelessHD transmitter, you can use the
transmitters Picture in Picture (P-in-P) feature to wirelessly project images from two separate sources at
the same time. This feature is independent of any Picture-in-Picture capabilities of your projector.
1. Make sure that the WirelessHD source is selected.
2. Point the remote at the WirelessHD transmitter and press the P-in-Pbutton in the WiHD Transmitter
section...

Adjusting the Menu Settings
Follow the instructions in these sections to access the projector menu system and change projector
settings.
Using the Projectors Menus
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Projector Feature Settings - Settings Menu
Projector Memory Options - Memory Menu
Projector Information Display - Info Menu
Projector Reset Options - Reset Menu
Using the Projectors Menus You can use the projectors menus to adjust the settings that control how your...

You see the menu screen displaying the Image menu settings.
2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right.
Note: The available settings depend on the current input source.
3. To change settings in the displayed menu, press Enter.
4. Press the up or down arrow button to move through the settings.
5. Change the settings using the buttons listed on the bottom of the menu screens.
6. To return all the menu settings to...

Image Quality Settings - Image Menu
Settings on the Image menu let you adjust the quality of your image for the input source you are currently
using. The available settings depend on the currently selected input source.
To change settings for an input source, make sure the source is connected and select that source.
Setting OptionsDescription
Color Mode DynamicAdjusts the vividness of image
colors for various image types
Living Room
and environments
Natural Not all Color Modes are available
THX on all...

Setting
OptionsDescription
Brightness Varying levels available Lightens or darkens the overall
image
Contrast Varying levels available Adjusts the difference between
light and dark areas of the image
Color Saturation Varying levels available Adjusts the intensity of the image
colors.
Tint Varying levels available Adjusts the balance of green to
magenta tones in the image.
Sharpness Standard:Adjusts the sharpness or
softness of image details
Varying levels available
Advanced:
Thin Line Enhancement
Thick...

Setting
OptionsDescription
Advanced GammaSelects various detailed color
settings
RGB
Gamma: adjusts the gamma
RGBCMY
levels of the image. Select
EPSON Super White Customizedto adjust the
gamma while viewing the image
Color Gamut
or a graph.
RGB: adjusts the dark areas
(Offset) and bright areas (Gain)
of the image for each color
RGBCMY: adjusts the hue,
saturation, and brightness for
each color
EPSON Super White: reduces
over-exposure of whites in your
image; can be set only when
Color Mode is set to...

Setting
OptionsDescription
Dynamic Contrast OffAdjusts the luminance of the
image to improve contrast by
Normal
tracking changes in image
High Speed brightness
Lens Iris Varying levels available Adjusts the contrast of the image
by controlling the amount of light
entering the lens
Note: TheBrightness setting does not affect laser brightness. To change the laser brightness mode,
use the Power Consumption setting.
Parent topic: Adjusting the Menu Settings
Related tasks
Changing the Color Mode
Adjusting the...