Epson Projector PowerLite Pro Cinema LS10000 User Manual

2. Press the
Lensbutton on the projectors control panel or remote control.
3. Press the Lensbutton repeatedly until Adjust Zoomis displayed on the screen.
4. Press and hold the left or right arrow buttons on the projectors remote control or use the thumbstick on the control panel to resize the image.
5. Press the Escbutton on the projectors control panel or remote control when finished.
Parent topic: Using Basic Projector Features
Focusing the Image with the Lens Button You can adjust the sharpness of...

2. Press the
Lensbutton on the projectors control panel or remote control.
3. Press the Lensbutton repeatedly until Adjust Focusis displayed on the screen.
4. Press and hold the left or right arrow buttons on the projectors remote control or use the thumbstick on the control panel to focus the image.
5. Press the Escbutton on the projectors control panel or remote control when finished.
Parent topic: Using Basic Projector Features
Adjusting the Color Convergence (Panel Alignment) You can use the Panel...

4. Select the
Panel Alignment setting and pressEnter.
5. Select the Panel Alignment setting and pressEnter.
6. Select Onand press Enter.
7. Select the Select Colorsetting and choose one of the following:
• Rto adjust the red color convergence.
• Bto adjust the blue color convergence.
Note: You can only adjust the red or blue color convergence. Green is the standard color panel and
cannot be adjusted.
8. Select the Pattern Color setting and press Enter.
9. Select the pattern you want to use and press...

You see this screen:
11. Use the arrow buttons on the remote control to adjust the color alignment in the corner of the screen highlighted by the orange box.
12. Press the Enterbutton to move to the next corner of the screen.
13. When you are finished adjusting each corner of the screen, press Enter.
You see this screen:
64 

14. Do one of the following:
• If your projectors panel alignment is now correct, select Exitand press Enterto return to the
Panel Alignment menu.
• If your projector needs additional panel alignment, select Select intersection and adjustand
press Enter. Use the arrow keys on the remote control to highlight the corner of any box on the
screen that is misaligned and press Enterto adjust the color convergence. Repeat this step as
necessary.
Parent topic: Using Basic Projector Features
Remote Control...

1 32 feet (10 m)
2 ± 30°
3 60°
Horizontal
1 32 feet (10 m)
2 ± 30°
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or
the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.
Parent topic: Using Basic Projector Features
66  

Selecting an Image Source
If you connected multiple image sources to the projector, such as a computer and DVD player, you may
want to switch from one image source to the other.
1. Make sure the connected image source you want to use is turned on.
2. For video image sources, insert a DVD or other video media and press its play button, if necessary.
3. Do one of the following:• Press the Sourcebutton on the projector until you see the image from the source you want.
• Press the button for the source you...

PowerLite Pro Cinema LS9600e
1 HDMI port sources
2 WirelessHD source
3 PCport (VGA) source
4 Composite video source
5 Component video source
PowerLite Pro Cinema LS10000
1 HDMI port sources
2 PCport (VGA) source
3 Composite video source
4 Component video source
68   

Parent topic:
Using Basic Projector Features
Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your
images project correctly.
•Front (default setting) lets you project from a table in front of the screen.
• Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.
• Rear flips the image horizontally to project from behind a translucent screen.
• Rear/Ceiling flips the image over top-to-bottom and...

4. Select the
Projectionsetting and press Enter.
5. Select a projection mode and press Enter.
6. Press MenuorEsc to exit the menus.
Parent topic: Projection Modes
Related references
Projector Feature Settings - Settings Menu
Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios. Normally the
input signal from your video source determines the images aspect ratio. However, for certain images
you can change the aspect ratio to fit your screen by...