Epson Projector PowerLite Pro Cinema LS10000 User Manual

							2. To turn the picture back on, press the
Blankbutton again.
Parent topic: Adjusting Projector Features
Locking the Projectors Buttons You can lock the buttons on the projectors control panel to prevent anyone from using the projector.
Note:You can use the remote control to control the projector when the control panel buttons are locked.
1. Press the Menubutton.
2. Select the Settingsmenu and press Enter.
3. Select the Lock Settingsetting and press Enter.
4. Select one of these lock types and press Enter:
• To lock the projectors power button, select Child Lock. To turn the projector on, you must press
the power button for longer than three seconds.
Note: Child Lock does not prevent the projector from turning on when the power cord is
connected if the Direct Power On Setting is set toOn.
• To lock all buttons except the power button, select Control Panel Lock. The lock icon is
displayed on the screen if any control panel buttons are pressed while this setting is enabled.
81  
						

							You see a confirmation prompt.
5. Select Yesand press Enter.
6. Restart the projector for the lock settings to take effect.
Unlocking the Projectors Buttons
Parent topic: Adjusting Projector Features
Related references
Projector Feature Settings - Settings Menu
Unlocking the Projectors Buttons If the projectors buttons have been locked, hold the Enterbutton on the projectors control panel for
seven seconds to unlock them.
Parent topic: Locking the Projectors Buttons
Saving Settings to Memory and Using Saved Settings You can save customized settings for each of your video inputs and then select the saved settings
whenever you want to use them.
1. Turn on the projector and display an image.
2. Press theMenubutton.
3. Select the Settingsmenu and press Enter.
4. Select the Memorymenu and press Enter.
82 
						

							You see this screen:
5. Select one of the following options: •Load Memory: Overwrites your current settings with saved settings
• Save Memory: Saves your current settings to memory (10 memories with different names are
available)
Note: A memory name that has already been used is indicated by a green mark. Saving over a
previously saved memory overwrites the settings with your current settings.
• Erase Memory: Erases the selected memory settings
• Rename Memory: Renames a saved memory
6. Press Escto exit.
Parent topic: Adjusting Projector Features
Related references
Projector Memory Options - Memory Menu
Saving the Lens Position and Using Saved Lens Positions You can save the focus, zoom, and lens shift settings and then select the saved settings whenever you
want to use them.
83 
						

							1. Turn on the projector and display an image.
2. Adjust the focus, zoom, and lens shift settings.
3. Press the
Menubutton.
Note: You can also press the Memorybutton on the remote control to access the Memory menu
directly.
4. Select the Memorymenu and press Enter.
You see this screen:
5. Select one of the following options: •Load Lens Position: Overwrites your current settings with saved settings
Note: You can load the saved settings from Memory1orMemory2 by pressing the Lens1or
Lens2 buttons on the remote control.
• Save Lens Position: Saves your current settings to memory (10 memories with different names
are available)
Note: A memory name that has already been used is indicated by a green mark. Saving over a
previously saved memory overwrites the settings with your current settings.
84 
						

							•
Erase Lens Position: Erases the selected memory settings
• Rename Lens Position: Renames a saved memory (12 characters maximum)
6. Press Escto exit.
Parent topic: Adjusting Projector Features
85 
						

							Using WirelessHD
You can use the included WirelessHD transmitter to wirelessly stream HD content from a video device to
the projector(PowerLite Pro Cinema LS9600e).
WirelessHD Transmission Range
WirelessHD Remote Control Operation
Connecting the WirelessHD Transmitter
Viewing WirelessHD Content
Switching WirelessHD Sources
Using the WirelessHD Picture in Picture Feature
WirelessHD Transmission Range The WirelessHD Transmitter must be placed within the distance and angles shown here. Make sure the
front of the WirelessHD Transmitter faces the front of the projector.
Vertical (on surface)
1 16 feet (5 m)
2 32 feet (10 m)
3 35°
4 40° 86  
						

							Vertical (inverted on ceiling)
1 16 feet (5 m)
2 32 feet (10 m)
3 45°
4 50°
Horizontal (when WiHD Mode is set to Full)
87   
						

							1 16 feet (5 m)
2 32 feet (10 m)
3 70°
4 50°
Horizontal (when WiHD Mode is set to Dynamic)
1 16 feet (5 m)
2 32 feet (10 m)
3 85°
4 60°
When positioning the WirelessHD transmitter, note the following:
• The wireless transmission range varies depending on the placement and material of the furniture and walls. The values provided here are for your reference only.
• The projector cannot communicate through walls.
• Place the WirelessHD transmitter on a wooden shelf or other location that does not block the signal.
88  
						

							• The antennas are built into the front of the projector and the transmitter. Make sure the antennas face
each other when setting up the devices.
• When checking the signal, place the projector and WirelessHD Transmitter close to each other and make sure there are no other projectors operating nearby.
• Depending on the signal strength, the images color information may be automatically discarded to avoid any interruptions and maintain a constant connection. To avoid any deterioration in image
quality, adjust the position of the transmitter so that the Receptionsetting is as strong as possible. If
no image is being input, the Receptionsetting displays 0%, even if the projector and transmitter are
connected.
Parent topic: Using WirelessHD
WirelessHD Remote Control Operation The remote control lets you control the WirelessHD transmitter from almost anywhere in the room. You
must point the remote at the transmitter.
Make sure that you aim the remote control at the WirelessHD transmitters remote receiver within the
distance and angles listed here.
Vertical
1 13 feet (4 m)
2 32 feet (10 m)
3 ± 40° 89  
						

							Horizontal
1 13 feet (4 m)
2 32 feet (10 m)
3 ± 40°
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or
the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.
Parent topic: Using WirelessHD
Connecting the WirelessHD Transmitter You can connect up to five HDMI input sources and one HDMI output source to your WirelessHD
transmitter.
90