Epson Projector PowerLite Pro Cinema LS10000 User Manual

							PowerLite Pro Cinema LS10000
A list of the available aspect ratios appears.
3. To cycle through the available aspect ratios for your input signal, press the up or down arrow button.
4. Press Enterto select the aspect ratio.
Parent topic: Image Aspect Ratio
Related references
Input Signal Settings - Signal Menu
Available Image Aspect Ratios You can select the following image aspect ratios, depending on the input signal from your image source.
Note:When the projector is in 3D mode, the aspect ratio is automatically set to Normal.
Note: Black bands and cropped images may project in certain aspect ratios, depending on the aspect
ratio and resolution of your input signal.
71   
						

							Aspect ratio setting
Description
Auto Automatically sets the aspect ratio according to the input signal.
Normal Displays images using the full projection area and maintains the
aspect ratio of the image.
Zoom Displays images using the full width of the projection area and
maintains the aspect ratio of the image.
Full Displays images using the full width of the projection area, but does
not maintain the aspect ratio.
You can also select two modes that can be used with a third-party anamorphic lens. Aspect ratio setting Description
Anamorphic Wide Displays CinemaScope content using an anamorphic lens.
Horiz. Squeeze Stretches the horizontal aspect of the input signal to project across
the entire screen using an anamorphic lens.
Note: TheAuto aspect ratio setting is available only for HDMI image sources.
Parent topic: Image Aspect Ratio
Color Mode The projector offers different Color Modes to provide optimum brightness, contrast, and color for a
variety of viewing environments and image types. You can select a mode designed to match your image
and environment, or experiment with the available modes.
If you always want to use a particular color mode for a certain video input source, you can select it using
the projector menus.
Changing the Color Mode
Available Color Modes
Adjusting the Lens Iris
Parent topic:Using Basic Projector Features
72 
						

							Changing the Color Mode
You can change the projectors Color Mode using the remote control to optimize the image for your
viewing environment.
1. Turn on the projector and switch to the image source you want to use.
2. If you are projecting from a DVD player or other video source, insert a disc or other video media andpress the play button, if necessary.
3. Press the Color Modebutton on the remote control to change the Color Mode.
A list of available Color Modes appears.
4. To cycle through all the available Color Modes for your input signal, press the up or down arrow button.
5. Press Enterto select a Color Mode.
Parent topic: Color Mode
Related references
Image Quality Settings - Image Menu
Available Color Modes You can set the projector to use these Color Modes, depending on the input source you are using:
2D Images
Color Mode Description
Dynamic Best for projecting in a bright room
73  
						

							Color Mode
Description
Living Room Best for projecting in a room with closed curtains
Natural Best for projecting in a dark room. Perform color adjustment in this
mode.
THX Uses a color mode authorized by THX Ltd.
Cinema Best for movies and concerts projected in a dark room
Digital Cinema Uses the same color spectrum as digital cinema movie theaters
(PowerLite Pro Cinema LS10000)
Adobe RGB Best when projecting images using the Adobe RGB color space
(PowerLite Pro Cinema LS10000)
3D Images Color Mode Description
3D Dynamic Best for projecting in a bright room
3D Cinema Best for movies projected in a dark room
3D THX Color mode authorized by THX Ltd.
Parent topic: Color Mode
Adjusting the Lens Iris In certain color modes, you can reduce the amount of light in the projection lens and adjust the
brightness of the content you project.
1. Turn on the projector and switch to the image source you want to use.
2. Press theMenubutton.
74 
						

							3. Select the
Imagemenu and press Enter.
4. Select the Lens Irissetting and press and hold the left or right arrow buttons on the projectors
remote control to adjust the lens iris.
Note: Reducing the value increases the intensity of the colors in the image. The default values and
settings differ based on the Color Mode settings and the zoom lens position.
5. Press MenuorEsc to exit the menus.
Parent topic: Color Mode
Changing the Super-resolution Setting You can sharpen blurred images and enhance the apparent detail of an image by increasing the
resolution of the image signal using the Super-resolutionsetting. (PowerLite Pro Cinema LS9600e).
Note: You cannot use Super-resolution when converting 2D images to 3D images, or when a computer
image is displayed. When projecting 3D images, you can use this setting only with 1080p/24 Hz/frame
packing signals.
1. Turn on the projector and switch to the image source you want to use.
75 
						

							2. Press the
Super Resbutton on the remote control.
Note: You can also set the Super-resolutionsetting from the Signal menu.
A list of the setting values appears. Higher values increase the intensity of the effect.
3. Press the left or right arrow buttons on the projectors remote control to adjust the setting.
4. Press MenuorEsc to exit the menus.
Parent topic: Using Basic Projector Features
Related references
Input Signal Settings - Signal Menu
Changing the Super-resolution/4K Enhancement Setting You can set the strength of the Super-resolution/4Ksetting (PowerLite Pro Cinema LS10000).
If you select a Super-resolution value of 1to 5, you can sharpen blurred images and enhance the
apparent detail of an image by increasing the resolution of the image signal.
If you select a 4K Enhancement value of 4K-1to4k-5, you can display 4K images (3840 × 2160) using
4K Enhancement Technology with super resolution processing and create ultra high-definition images.
Note: You cannot use Super-resolution when converting 2D images to 3D images, or when a computer
image is displayed. When projecting 3D images, you can use Super-resolution only with
1080p/24 Hz/frame packing signals. You cannot use 4K Enhancement when projecting 3D images.
1. Turn on the projector and switch to the image source you want to use.
76  
						

							2. Press the
Sup Res/4Kbutton on the remote control.
Note: You can also select the Super-resolution/4Ksetting in the Signal menu.
A list of the available settings appears.
3. Press the up or down arrow buttons on the projectors remote control to select a setting.
4. Press the Sup Res/4Kbutton on the remote control to exit the menu.
Parent topic: Using Basic Projector Features
Related references
Input Signal Settings - Signal Menu
Using Picture in Picture You can use Picture in Picture mode to view two image sources simultaneously.
Note:You can only display HDMI or WirelessHD (PowerLite Pro Cinema LS9600e) video sources when
Picture in Picture mode is active.
Note: You cannot use Picture in Picture while projecting 3D or 4K images.
1. Turn on the projector and switch to the HDMI or WirelessHD image source you want to use.
2. Press the P-in-Pbutton on the remote control.
PowerLite Pro Cinema LS9600e
77  
						

							PowerLite Pro Cinema LS10000
The second HDMI video source appears as a sub-screen in the corner of the image.
Note:
While Picture in Picture mode is active, press the Menubutton on the remote control to adjust
the size and position of the sub-screen.
3. To swap the main screen and sub-screen video sources, press and hold the P-in-Pbutton for at
least three seconds.
4. Press the P-in-Pbutton again to close the sub-screen and resume normal projection.
Available Picture in Picture Options
Parent topic: Using Basic Projector Features
Related references
Projector Feature Settings - Settings Menu
78   
						

							Available Picture in Picture Options
You can adjust the following options by pressing the Menubutton on the remote control while Picture in
Picture mode is active:
Setting Description
Subscreen Size Adjusts the size of the sub-screen
Subscreen Position Adjusts the location where the sub-screen is displayed
Subscreen Source Selects which source appears in the sub-screen
(PowerLite Pro Cinema LS9600e)
Swap Main/Sub Switches the video source displayed on the main screen with the
source displayed on the sub-screen
Exit Picture in Picture Closes the sub-screen and resumes normal projection
Parent topic: Using Picture in Picture
79 
						

							Adjusting Projector Features
Follow the instructions in these sections to use your projectors feature adjustments.
Shutting Off the Picture Temporarily
Locking the Projectors Buttons
Saving Settings to Memory and Using Saved Settings
Saving the Lens Position and Using Saved Lens Positions
Shutting Off the Picture Temporarily You can temporarily turn off the projected picture if you want to redirect your audiences attention during
a presentation. Any video action continues to run, however, so you cannot resume projection at the point
that you stopped it.
1. Press theBlankbutton on the remote control to temporarily stop projection.
PowerLite Pro Cinema LS9600e
PowerLite Pro Cinema LS10000
80