Epson Projector Emp 9300 User Manual

90
Using the Configuration Menu Functions Using the Configuration Menu Functions
Color 
Adjustment
Adjusts the colour temperature
 and intensity of each RGB 
(red, green, blue) colour for each input source.
Color Temp.: Lets you adjust bright colours within a range 
from reddish tinges to bluish tinges.
If the colour temperature is lower, colours 
appear reddish and colour tones appear 
softer.
If the colour temperature is higher, colours 
appear bluish and colour tones appear 
sharper.
Press the...

91
Using the Configuration Menu Functions Using the Configuration Menu Functions
Ceiling Use when installing the projector on a ceiling.
When set to ON, the projected images are rotated 180° 
and are horizontally and vertically reversed.OFF
Standby 
ModeSet to Network ON to use network monitoring and 
control functions and the standby monitor out function 
while the projector is in standby mode.
When this setting is changed, turn the power off, and when 
the cool-down
 period has finished, the new...

92
Using the Configuration Menu Functions Using the Configuration Menu Functions
EMP-9300
EMP-8300Advanced2 Menu
:
Video
Audio
Setting
Users Logo
Advanced1
About
Reset All
Reset
Execute
[Menu]: Exit
[    ]: Enter [    ]: Select
EffectAdvanced2
BNC Sync Termination
ONOFF
:
Projector ID
Network
: 1
COM Port
:
Set
Set
RS-232CUSB
Auto Setup
ONOFF
:
Direct Power ON
ONOFF
:
Brightness ControlHighLow
:
Video
Audio
Setting
Users Logo
Advanced1
About
Reset All
Projector ID
NetworkReset
Execute
: 1
[Menu]: Exit
[...

93
Using the Configuration Menu Functions Using the Configuration Menu Functions
Direct 
Power ON(EMP-9300 only)
When the projectors power cable is connected to a wall 
outlet, projection can be started without having to press the 
[Power] button.
To turn the power off, press the [Power] button, wait for 
cool-down
 to finish then disconnect the power cable.OFF
Reset Resets all adjustments values for the Advanced2 menu 
functions except for the Projector ID and Network 
settings to their default...

94
Using the Configuration Menu Functions Using the Configuration Menu Functions
 The About menu shows the setting details for the current input signal.
 The Lamp item appears as 0H for 0–10 hours, and after that it appears in units of 1 hour.
About MenuComputer (Analogue RGB, Digital RGB)/
Component Video
 (YCbCr
, YPbPr
)/
RGB Video
Video (Composite Video
, S-Video
)
Video
Audio
Setting
Users Logo
Advanced1
About
Reset All
Frequency Source
V ---.---Hz Reset Lamp Timer
H ---.---kHz Lamp0H
SYNC Mode...

95
Using the Configuration Menu Functions Using the Configuration Menu Functions
Reset All Menu
Execute
Video
Audio
Setting
Users Logo
Advanced1
About
Reset All
[    ]: Execute[Menu]: Exit
[    ]: Select
EffectAdvanced2
Sub-menu
Function
Default
Execute Resets all items in all configuration menus to their default 
settings.
 Press the [Enter] button on the remote control or the 
[Auto/Enter] button on the projectors control panel to 
reset.
 Select Reset in an individual sub-menu such as the 
Video or...

96
Using the Configuration Menu Functions Using the Configuration Menu FunctionsUsing the Configuration Menus
The configuration menus can be operated using either the remote control or 
the projectors control panel.PROCEDURE
Press the [Menu] button on either the remote control 
or the projectors control panel.
The main configuration menu appears.Select a main menu item.
If using the remote control, tilt the [ ] button up or down to 
select a menu item.
If using the projectors control panel, press the...

97
Using the Configuration Menu Functions Using the Configuration Menu Functions
Select a sub-menu item.
If using the remote control, tilt the [ ] button up or down to 
select a sub-menu item.
If using the projectors control panel, press the [Sync +] or 
[Sync -] button to select a sub-menu item.
Select a setting value.Tilt the [ ] button on the remote control or press the [Tracking +] 
or [Tracking -] button on the projectors control panel to change 
setting values.For items which are currently set, a...

98
Using the Configuration Menu Functions Using the Configuration Menu Functions
Select other menu items in the same way.
Repeat steps 2 to 5 to change the settings for other menu items. 
To return to a previous menu, press the [ESC] button on either 
the remote control or the projectors control panel.Close the menu.
Press the [Menu] button on either the remote control or the 
projectors control panel.
67
TIP
The display position for configuration menus can be set to either the 
top-left or the...

99
Projector Monitoring and Control using a NetworkComputers and projectors can be connected together using a network so that 
the statuses of the projectors can be monitored and controlled by computer via 
the network.
A Projector Software CD-ROM is included as an accessory with this projector.
The Projector Software CD-ROM contains the EMP NetworkManager and 
EMP Monitor software. This software can be used to carry out the following 
network monitoring and control functions.
EMP Monitor
This allows...