Epson Projector Emp 9300 User Manual
Here you can view all the pages of manual Epson Projector Emp 9300 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
110
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
Select the projector to be monitored or controlled and
then click [Add].If there are other projectors that you would like to
monitor that need to be added, repeat step 4.
Once all new projectors to be monitored have been
added, click [Close].
The display will return to the Register projector window, and
the names of the added projectors will appear in the projector
list.Once all target projectors...](http://img.usermanuals.tech/thumb/23/90098/w300_epson-emp-9300-manual_d-110.png "Page 111
110
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
Select the projector to be monitored or controlled and
then click [Add].If there are other projectors that you would like to
monitor that need to be added, repeat step 4.
Once all new projectors to be monitored have been
added, click [Close].
The display will return to the Register projector window, and
the names of the added projectors will appear in the projector
list.Once all target projectors...")
110 Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network Select the projector to be monitored or controlled and then click [Add].If there are other projectors that you would like to monitor that need to be added, repeat step 4. Once all new projectors to be monitored have been added, click [Close]. The display will return to the Register projector window, and the names of the added projectors will appear in the projector list.Once all target projectors...
Page 112
111 Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network The statuses of the registered projectors will each be displayed. Once a projector has been registered, the status of the projector will be displayed automatically each time EMP Monitor is started from then on. The following table shows the display details. Status : The projector statuses are indicated by means of the following icons. Power ON with no problems Power OFF with no problems Power ON...
Page 113
![Page 113
112
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
The power for all registered projectors can be turned
on and off at the same time, and the input signal for
all projectors can also be selected at the same time.
Select the projectors for which the operation is to be
carried out and then click the desired operation
button.
If you would like to select all projectors, click [Select All].
Furthermore, you can also use the same operations as selecting...](http://img.usermanuals.tech/thumb/23/90098/w300_epson-emp-9300-manual_d-112.png "Page 113
112
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
The power for all registered projectors can be turned
on and off at the same time, and the input signal for
all projectors can also be selected at the same time.
Select the projectors for which the operation is to be
carried out and then click the desired operation
button.
If you would like to select all projectors, click [Select All].
Furthermore, you can also use the same operations as selecting...")
112 Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network The power for all registered projectors can be turned on and off at the same time, and the input signal for all projectors can also be selected at the same time. Select the projectors for which the operation is to be carried out and then click the desired operation button. If you would like to select all projectors, click [Select All]. Furthermore, you can also use the same operations as selecting...
Page 114
TroubleshootingThis chapter describes how to identify problems and what to do if a problem is found.Using the Help ................................................... 114 Problem Solving................................................ 116 Reading the Indicators...................................................... 116 When the Indicators Provide No Help ............................ 120 Problems relating to images .................................................... 121 Problems relating to...
Page 115
![Page 115
114
Using the HelpIf a problem occurs with the projector, the Help function uses on-screen
displays to assist you in solving the problem. It uses a series of menus in a
question and answer format.
PROCEDURE
Press the [Help] button on either the remote control
or the projectors control panel.
The help menu will be displayed.Select a menu item.
If using the remote control, tilt the [ ] button up or down to
select a menu item.
If using the projectors control panel, press the [Sync +] or
[Sync -] button...](http://img.usermanuals.tech/thumb/23/90098/w300_epson-emp-9300-manual_d-114.png "Page 115
114
Using the HelpIf a problem occurs with the projector, the Help function uses on-screen
displays to assist you in solving the problem. It uses a series of menus in a
question and answer format.
PROCEDURE
Press the [Help] button on either the remote control
or the projectors control panel.
The help menu will be displayed.Select a menu item.
If using the remote control, tilt the [ ] button up or down to
select a menu item.
If using the projectors control panel, press the [Sync +] or
[Sync -] button...")
114 Using the HelpIf a problem occurs with the projector, the Help function uses on-screen displays to assist you in solving the problem. It uses a series of menus in a question and answer format. PROCEDURE Press the [Help] button on either the remote control or the projectors control panel. The help menu will be displayed.Select a menu item. If using the remote control, tilt the [ ] button up or down to select a menu item. If using the projectors control panel, press the [Sync +] or [Sync -] button...
Page 116
![Page 116
115
Using the Help Using the Help
Repeat steps 2 and 3 to proceed through the menu to
more detailed items.
The help menu is cleared when the [Help] button is pressed.
4
No image appears on the screen.
The image is not displayed fully on the screen.
(cut off/ too big/ too small/ partial)
The color of the image is abnormal .
The image is too dark.
The image is distorted. The image is not in focus.
The image is disturbed.Help Menu
[ ]:
Enter
[ESC]:
Return
[ ]:
Select
[ ]:
Exit
TIP
If the...](http://img.usermanuals.tech/thumb/23/90098/w300_epson-emp-9300-manual_d-115.png "Page 116
115
Using the Help Using the Help
Repeat steps 2 and 3 to proceed through the menu to
more detailed items.
The help menu is cleared when the [Help] button is pressed.
4
No image appears on the screen.
The image is not displayed fully on the screen.
(cut off/ too big/ too small/ partial)
The color of the image is abnormal .
The image is too dark.
The image is distorted. The image is not in focus.
The image is disturbed.Help Menu
[ ]:
Enter
[ESC]:
Return
[ ]:
Select
[ ]:
Exit
TIP
If the...")
115 Using the Help Using the Help Repeat steps 2 and 3 to proceed through the menu to more detailed items. The help menu is cleared when the [Help] button is pressed. 4 No image appears on the screen. The image is not displayed fully on the screen. (cut off/ too big/ too small/ partial) The color of the image is abnormal . The image is too dark. The image is distorted. The image is not in focus. The image is disturbed.Help Menu [ ]: Enter [ESC]: Return [ ]: Select [ ]: Exit TIP If the...
Page 117
116 Problem SolvingIf you are having a problem with the projector, first check the projectors indicators while referring to Reading the Indicators below. If the indicators do not show clearly what the problem might be, refer to When the Indicators Provide No Help. p.120Reading the Indicators The projector is provided with the following three indicators. These indicators notify you of the operating status of the projector. The following tables show what the indicators mean and how to remedy the...
Page 118
117 Problem Solving Problem Solving Fan related error/Sensor error Stop using the projector, disconnect the power cable from the electrical outlet, and contact your dealer or the nearest address provided in the International Warranty Conditions section of the Safety Instructions/World-Wide Warranty Terms booklet. Lamp cover is open error./ Lamp timer failure/ Lamp outTake out the lamp and check if it is broken. Replacing the Lamp p.133 If the lamp is not broken, put it back in and then turn the power...
Page 119
![Page 119
118
Problem Solving Problem Solving
Lamp replacement notification Replace the lamp with a new one. p.133
If you continue to use the lamp after it has passed the replacement period, the possibility that the
lamp may break will increase. Replace the lamp with a new one as soon as possible.
* The indicator status will vary depending on the projector status at the time.
Standby condition (Not abnormal)
Press the [Power] button on either the remote control or the projectors control panel to start...](http://img.usermanuals.tech/thumb/23/90098/w300_epson-emp-9300-manual_d-118.png "Page 119
118
Problem Solving Problem Solving
Lamp replacement notification Replace the lamp with a new one. p.133
If you continue to use the lamp after it has passed the replacement period, the possibility that the
lamp may break will increase. Replace the lamp with a new one as soon as possible.
* The indicator status will vary depending on the projector status at the time.
Standby condition (Not abnormal)
Press the [Power] button on either the remote control or the projectors control panel to start...")
118 Problem Solving Problem Solving Lamp replacement notification Replace the lamp with a new one. p.133 If you continue to use the lamp after it has passed the replacement period, the possibility that the lamp may break will increase. Replace the lamp with a new one as soon as possible. * The indicator status will vary depending on the projector status at the time. Standby condition (Not abnormal) Press the [Power] button on either the remote control or the projectors control panel to start...
Page 120
119 Problem Solving Problem Solving TIP If the projector is not operating properly even though the indicators are all showing normal, refer to When the Indicators Provide No Help. If an indicator is showing a status which does not appear in the previous tables, contact you dealer or the nearest address provided in the International Warranty Conditions section of the Safety Instructions/World-Wide Warranty Terms booklet.