Epson Projector Emp 9300 User Manual

140
Saving a Users Logo Saving a Users Logo
Select Yes at the confirmation screen, and then 
press the [Enter] button on the remote control or the 
[Auto/Enter] button on the projectors control panel.
The image will then be saved. Once the image has been saved, 
the message Completed. will be displayed.
7
Save image as users logo?If you save it, the previous users logo willbe overwritten.
YESNO Users Logo
TIP
 Saving the users logo may take a few moments (about 15 seconds). 
Do not use the projector or...

141
Optional AccessoriesThe following optional accessories are available for purchase if required. This list of optional accessories is current as of October 2003. Details of accessories are 
subject to change without notice.
*1 The 40 Billboard Vision screen cannot be used unless the standard 
lens or the wide angle zoom lens is fitted to the projector. Hard travel case ELPKS50
Use this case if you need to carry the projector by hand.
Spare lamp  (EMP-9300) ELPLP26
(EMP-8300) ELPLP23
(Set with spare...

142
Optional Accessories Optional Accessories
*2 Cannot be installed by the customer. Please contact your dealer for 
assistance.
*3 EasyMP. net unit is only for the EMP-8300. Standard lens
*2
 ELPLS02
(Projection distance ratio: Approx. 1.8–2.4)
Rear projection wide lens
*2
 ELPLR02
(Projection distance ratio: Approx. 0.86)
Long throw zoom lens
*2
 ELPLL04
(Projection distance ratio: Approx. 5.3–7.1)
Medium throw zoom lens 1
*2
 ELPLM01
(Projection distance ratio: Approx. 2.4–3.6)
Medium throw zoom lens...

143
GlossaryThe following table contains explanations of some of the terms used in this guide which may be unfamiliar or which are not explained in the text of the guide. 
Further information can be obtained by referring to other commercially-available publications.
3-2 pull-down functionThis function directly converts image sources that have been recorded in the same 24-frame format used for movies into 60-
frame progressive signals. This allows data such as DVD software that has been recorded in...

144
Glossary Glossary
EMP Link21LA utility software program that allows the projector to be connected to a computer so that the computer can be used to control 
the projector. For details on acquiring the software and for instructions on using the software and compatible projector 
models, please visit the web site http://www.epson.co.uk/support/download/projector.htm.
Film judgment function
A function for judging whether an image source is a 24 Hz progressive film source or not.
GatewayA server (router)...

145
Glossary Glossary
Subnet mask
A series of numbers that define the number of bits to be used for network addresses in a network (subnet) that is divided up 
according to IP addresses.
SVGAA type of video signal with a resolution of 800 (horizontal) ×
 600 (vertical) dots which is used by IBM PC/AT-compatible 
computers.
S-Video
A video signal which has the luminance component and colour component separated in order to provide better image quality.
It refers to images which consist of two independent...

146
List of ESC/VP21 CommandsCommand List
When a power on command is sent to the projector, it goes into a warm-up 
state. When the power comes on, a colon : is returned.
After executing a command, the projector returns a colon : and handles 
the next command.
When there is a problem with shutting down, a colon : is sent after an 
error message is output.
Communication Protocol
Item
Command
Power ON/OFFON PWR ON
OFF PWR OFF
Signal selectionComputer 1 SOURCE 10
Computer 2 SOURCE 20
DVI
SOURCE 30
Video...

147
List of ESC/VP21 Commands List of ESC/VP21 CommandsCable Layouts
Serial connection•
•• •Connector shape : D-Sub 9-pin (male)•
•• •Projector input 
connector: Control (RS-232C)

 (PC serial cable) 
Signal Function
GND
5
5
GND
GND Signal wire earth
RD
2
3
TD
TD Transmit data
TD
3
2
RD
RD Receive data
DTR
4
6
DSR
DSR Data set ready
DSR
6
4
DTR
DTR Data terminal ready

USB connection•
•• •Connector shape : USB(type B)
(type B) 

148
List of ESC/VP21 Commands List of ESC/VP21 CommandsUSB Connection Setup
In order to control the projector using ESC/VP21 commands via a USB 
connection, the following preparations must be carried out.PROCEDURE
Download the EMP Link21L
 utility software from the 
EPSON website to the computer being used.
For details on acquiring the software, please visit the Web site 
http://www.epson.co.uk/support/download/projector.htm
.
The USB driver (USB-COM Driver) will be downloaded 
together with the utility...

149
List of Supported Monitor Displays
*1 Connection is not possible if the equipment does not have a VGA 
output port.
*2 The resolution for real display is the virtual (window) display 
resolution.
It may be possible to project signals which are not listed in the above table. 
However, not all functions may be supportable with such signals.
Computer/RGB Video
Signal
Refresh rate
 (Hz)
Resolution 
(dots)
Resolutions for resized 
display
 (dots)
EMP-9300
EMP-8300
EGA 640×350 1400×766 1024×560
VGACGA...