Epson Projector Emp 9300 User Manual

							1
Notations Used in This User’s Guide
When unit or projector appears in the text of this User’s Guide, it may refer to items which are accessories or optional equipment 
in addition to the main projector unit itself.Indicates procedures which may result in damage or injury if sufficient care is not taken.
Indicates additional information and points.
Indicates a page where useful information regarding a topic can be found. Click on the page number to 
display that page.
Indicates that an explanation of the underlined word or words in front of this symbol appears in the 
glossary of terms. Click the underlined word or words to display the corresponding entry in the 
Glossary section of the Appendices.   p.143
Indicates operating methods and the order of operations.
The procedure indicated should be carried out in the order of the numbers.
CAUTION
TIP
PROCEDURE 
						

							2
Features of the ProjectorImages can be projected regardless of the location.
• If the screen is in a high position or the projector is suspended from 
a high ceiling. 
The position of the 
projected images can be 
adjusted vertically.
(Lens shift function 
 p.50) 
The projector can be tilted using the front 
adjustable feet, and the keystone distortion in 
the projected images that occurs as a result of 
this can also be corrected.
(Vertical keystone correction   p.54)
If vertical keystone correction causes the height 
of  projected images to be too short, the height 
of the projection area can also be adjusted. 
(Height correction   p.55)
 When projecting from the side of the screen
The Quick Corner function can be used to 
correct the four corners of the projection area to 
make the images fit the screen exactly.    p.52Multiple projectors can be monitored and operations such as turning the 
power on and off and changing the input signal source can be carried out 
over a network by a single operator sitting at a computer. 
(EMP Monitor   p.99)
In addition, if a problem occurs with a projector, such as a lamp blowing 
while projection is in progress, e-mail notification messages can be sent by  
the projector to notify someone of the problem. (Mail notification function 
 p.103)Position adjustment function for a variety of projection screens
Projector monitoring and control functions using a network
ON
ON
ON
E-mail
Network 
						

							3
Features of the Projector
Optimum images can be projected simply by selecting the image quality 
from the following five preset settings according to the projection 
environment being used. No other colour adjustments are necessary.
 p.60
 • Dynamic   Presentation    Theatre    Living Room    sRGBThese functions allow you to indicate important points using a pointer and 
draw straight lines and freehand curves to help make explanations easier to 
understand.  p.67The projector can display images at high resolutions with a high degree of 
luminance.
In addition, images can be switched to low luminance if they are too bright 
when projecting in dark rooms or onto small screens. (EMP-8300 only)
  p.92
The remote control can be used for operations such as pausing projection 
(Freeze Function   p.64) and zooming in on important areas of an image 
(E-Zoom Function   p.64). In addition, the remote control can be used to 
move the pointer around on the computer screen during projection (Wireless 
Mouse Function   p.24). If using the wireless mouse function, you can use 
the remote control to scroll back and forth through slides when projecting a 
PowerPoint presentation.Colour mode function
Presentation
Theatre
Living Room
Effects functions
Brilliant, attractive imagesEasy to operate 
						

							4
Features of the Projector
When projecting multiple images on large-sized screen by multiple projectors making the images look one image, you may be bothered by the difference of 
colours between each projection. In such case, you can make multiple adjustments for the projectors using EMP Multi Screen Adjustment. (EMP-9300 only)
 Read This First Viewing the EMP Multi Screen Adjustment Operation Guide
EMP Multi Screen Adjustment
Imaging 
equipment
Network 
						

							5
Contents
Notations Used in This User’s Guide..................................... 1
Features of the Projector ....................................................... 2
Before Using the Projector
Part Names and Functions .................................................... 8
Front/Top/Side ............................................................................ 8
Base ............................................................................................. 9
Rear ............................................................................................. 9
Control Panel ............................................................................ 10
Remote Control ......................................................................... 11
Input/Output Ports..................................................................... 12
Before Using the Remote Control........................................ 13
Inserting the Batteries ............................................................... 13
Using the Remote Control and Remote Operating Range ........ 14
Installation ........................................................................... 16
Setting Up the Projector ............................................................ 16
Screen Size and Projection Distance......................................... 17
Connecting to a Computer .................................................. 18
Eligible Computers ................................................................... 18
Projecting Images from the Computer ...................................... 19
If Connecting More Than One Computer ................................. 23
Using the Remote Control to Operate the Mouse 
Pointer (Wireless Mouse Function)  ........................................ 24
Connecting to a Video Source............................................. 26
Projecting Composite Video Images ......................................... 26
Projecting S-Video Images ....................................................... 27
Projecting Component Video Images ....................................... 27
Projecting RGB Video Images .................................................. 28
Playing Sound from the Video Equipment ........................... 30
Playing Sound from External Speakers ............................... 32Connecting to an External Monitor.......................................33
Connecting an External Monitor ............................................... 33
Checking Projected Images on an External Monitor 
While the Projector is at Standby (Standby Monitor Out) ...... 34
Installing the Cable Cover ....................................................35
Preventing theft (Password Protect)(EMP-9300 only) ..........36
When Password Protect is enabled............................................ 36
Setting Password Protect ........................................................... 37
Basic Operations
Turning the Projector On ......................................................41
Connecting the Power Cable ..................................................... 41
Turning the Power On and Projecting Images........................... 42
Selecting an Image Source While Viewing Projected 
Images (Preview Function)  ..................................................... 44
Turning the Projector Off ......................................................46
Adjusting the Screen Image .................................................48
Adjusting the Image Size (Zoom Function) .............................. 48
Focusing the Screen Images (Focus Adjustment) ..................... 49
Adjusting the Image Angle ....................................................... 49
Correcting Distortion in the Projection Area 
(Keystone Correction) .............................................................. 52
Adjusting the Image Quality .................................................57
Adjusting Computer Images...................................................... 57
Selecting the Projection Quality (Colour Mode Selection)....... 60
Adjusting the Volume ...........................................................61 
						

							6
ContentsAdvanced Operations
Functions for Enhancing Projection ..................................... 63
A/V Mute Function ................................................................... 63
Freeze Function......................................................................... 64
E-Zoom Function ...................................................................... 64
P in P (Picture in Picture) Function .......................................... 65
Effect Function.......................................................................... 67
Preset Function.......................................................................... 69
Changing the Resize/Aspect Ratio............................................ 71
Projector ID/Remote Control ID............................................... 74
Using the Configuration Menu Functions ............................ 77
List of Functions ....................................................................... 78
Using the Configuration Menus ................................................ 96
Projector Monitoring and Control using a Network .............. 99
Compatible Computers ............................................................. 99
Installing and Uninstalling the Projector Software ................. 100
Network Cable Connections ................................................... 101
Projector Connection Settings................................................. 102
Problem Reporting Using the Mail Notification Function...... 103
Centralised Monitoring and Controlling of Projectors 
(EMP Monitor) .....................................................................  108
Troubleshooting
Using the Help ...................................................................114
Problem Solving .................................................................116
Reading the Indicators............................................................. 116
When the Indicators Provide No Help .................................... 120
Appendices
Maintenance ......................................................................130
Cleaning .................................................................................. 130
Replacing Consumables .......................................................... 132
Saving a Users Logo .........................................................138
Optional Accessories .........................................................141
Glossary .............................................................................143
List of ESC/VP21 Commands ............................................146
Command List ......................................................................... 146
Communication Protocol......................................................... 146
Cable Layouts.......................................................................... 147
USB Connection Setup............................................................ 148
List of Supported Monitor Displays ....................................149
Specifications .....................................................................150
Appearance ........................................................................152
Index ..................................................................................153 
						

							Before Using the ProjectorThis chapter describes the procedures for setting up the projector before use.Part Names and Functions................................... 8
• Front/Top/Side .......................................................................8
 Base.........................................................................................9
 Rear ........................................................................................9
 Control Panel ....................................................................... 10
 Remote Control ...................................................................11
 Input/Output Ports.............................................................. 12
Before Using the Remote Control ..................... 13
 Inserting the Batteries ........................................................ 13
 Using the Remote Control and Remote 
Operating Range  ................................................................ 14 Using the Remote Control............................................................................. 14
 Remote Operating Range .............................................................................. 15
Installation ........................................................... 16
 Setting Up the Projector ..................................................... 16
 Screen Size and Projection Distance..................................17
Connecting to a Computer ................................. 18
 Eligible Computers .............................................................18
 Projecting Images from the Computer.............................. 19 If the Monitor Port is a Mini D-Sub 15-pin Port........................................... 19
 If the Monitor Port is a 13w3 Port ................................................................ 20
 If the Monitor Ports are the 5BNC Ports....................................................... 21
 If the Monitor Port is a Digital RGB Port ..................................................... 22 If Connecting More Than One Computer ........................ 23
 Using the Remote Control to Operate the Mouse 
Pointer (Wireless Mouse Function)  ..................................24
Connecting to a Video Source ........................... 26
 Projecting Composite Video Images ................................. 26
 Projecting S-Video Images ................................................. 27
 Projecting Component Video Images ............................... 27
 Projecting RGB Video Images........................................... 28 If the RGB Output Port is a Mini D-Sub 15-pin Port ................................... 28
 If the RGB Output Ports are the 3BNC Ports ............................................... 29
Playing Sound from the Video Equipment........ 30
Playing Sound from External Speakers ............ 32
Connecting to an External Monitor ................... 33
 Connecting an External Monitor ...................................... 33
 Checking Projected Images on an External Monitor 
While the Projector is at Standby 
(Standby Monitor Out)  ..................................................... 34
Installing the Cable Cover .................................. 35
 Installation .................................................................................................... 35
 Removal ........................................................................................................ 35
Preventing theft (Password Protect)
(EMP-9300 only) .................................................. 36
 When Password Protect is enabled ................................... 36 When Power ON Protect is enabled (ON) ................................................. 36
 When User’s Logo Protect is enabled (ON) .............................................. 37 Setting Password Protect ................................................... 37 
						

							8
Part Names and FunctionsThe illustration below shows the projector with a standard lens fitted.Front/Top/Side
•
•• •Remote control light-receiving area 
 p.14Receives signals from the remote control.
•
•• •Speaker•
•• •HandleUse this handle when lifting and transporting 
the projector.•
•• •
 (Operation) indicator   p.116
Flashes or lights in different colours to 
indicate the operating status of the projector.•
•• •
 (Lamp) indicator   p.116
Flashes or lights in different colours to 
indicate problems with the projection lamp.•
•• •
 (Temperature) indicator   p.116Flashes or lights in different colours to 
indicate problems with the internal 
temperature of the projector.•
•• •Foot adjust lever   p.51Another foot adjust lever is located on the 
right side.
Pull both foot adjust levers when extending 
and retracting the front adjustable feet.
•
•• •Control panel   p.10•
•• •Security lock ( )   p.144•
•• •Air exhaust vent•
•• •Lens coverAttach when not using the projector in order to 
prevent the lens from becoming dirty or damaged.•
•• •Front adjustable foot   p.51Extend and retract to adjust the projection angle 
when the projector is placed on a surface such as 
a shelf.•
•• •Front adjustable foot   p.51Extend and retract to adjust the projection 
angle when the projector is placed on a surface 
such as a shelf.•
•• •Air intake vent   p.131 
						

							9
Part Names and FunctionsBase
Rear
•
•• •Suspension bracket fixing points (4 points)   p.16, p.142Connect an optional ceiling mount here when suspending the projector from 
the ceiling.
•
•• •Air filters (2 places) (air intake vents)   p.130, p.136Prevent dust and other foreign particles from being drawn into the 
projector. Clean the air filters periodically.
•
•• •Lamp cover   p.133Open this cover when 
replacing the lamp inside 
the projector.
•
•• •Remote control light-
receiving area   p.14Receives signals from the remote 
control.
•
•• •Power inlet   p.41Connect the power cable here.
•
•• •Input/output ports   p.12