Epson Projector Emp 9300 User Manual

50
Adjusting the Screen Image
If the projector cannot be set up directly in front of the screen, you can 
project images at a horizontal angle to the screen. If keystone distortion 
appears in the images, you can use the projectors Quick Corner function 
to correct this keystone distortion.   p.52
The vertical position of the projection area can be adjusted by moving the 
lens up or down.
PROCEDUREPress the [Lens Shift] buttons on either the remote control 
or the projectors control panel.If you press...

51
Adjusting the Screen Image
You can extend or retract the front adjustable feet to tilt the projector to 
adjust the upward projection angle within a maximum range of 9º.
PROCEDUREWhile pulling the two foot adjust levers at either side, lift 
up the front of the projector so that the front adjustable 
feet can extend.
Extend the front adjustable feet until the desired angle is obtained, 
and then release the foot adjust levers.
To retract the front adjustable feet, gently push down on the projector...

52
Adjusting the Screen ImageCorrecting Distortion in the Projection Area (Keystone Correction) 
The projector is equipped with the following two functions for correcting 
keystone distortion. Use whichever function is effective for correcting the 
distortion.
 Quick Corner:
This correction function is used when both horizontal and vertical 
keystone distortion occurs in the projection area to adjust the projection 
area so that it fits the screen exactly.
 Vertical keystone:
This correction function...

53
Adjusting the Screen Image
PROCEDURE
Press the [Menu] button on either the remote control 
or the projectors control panel, and then select 
Quick Corner from the Keystone sub-menu of the 
Setting menu.
The Quick Corner correction screen will be displayed.
Press the [Enter] button on the remote control or the 
[Auto/Enter] button on the projectors control panel to 
select the correction angle in the screen.Tilt the [ ] button on the remote control, or press the 
[Sync +], [Sync -], [Tracking +] and...

54
Adjusting the Screen Image
When the correct is complete, press the [Menu] 
button on either the remote control or the projectors 
control panel.
Vertical keystone correction can be carried out using either the projectors 
control panel or the configuration menus. This procedure explains how to 
use the projectors control panel to correct keystone distortion.
For adjustment using the configuration menus: 
See Setting - Keystone - V-Keystone   p.85PROCEDURE
TIP
 If you hold down the [Shift] button on...

55
Adjusting the Screen Image
When vertical keystone correction is carried out, the height of the 
projected images will become shorter. Use the height correction function to 
adjust the height of the projection area.
Adjustments using the height correction function are carried out using the 
configuration menus.
PROCEDURE
Press the [Menu] button on either the remote control 
or the projectors control panel. Then select Height 
from the Keystone sub-menu of the Setting menu.
The height correction screen...

56
Adjusting the Screen Image
Tilt the [ ] button on the remote control to the left or 
right, or press the [Tracking +] or [Tracking -] buttons 
on the projectors control panel to correct the height 
while viewing the projected images.When the adjustment is complete, press the [Menu] 
button on either the remote control or the projectors 
control panel to close the configuration menu.
2
[    ]: Select [ ESC ]: Return
[Menu]: Exit
[    ]: Adjust
VideoVideoAudioudioSettingUsers LogoUsers...

57
Adjusting the Image QualityThe quality of the projected images can be adjusted as follows.Adjusting Computer Images
Automatic setup detects analogue RGB signals coming from a connected 
computer, and automatically adjusts these signals so that the optimum 
images can be obtained.
Automatic setup involves adjustment of the following three items: 
Tracking
, Position and Sync
. 
Automatic Setup
TIP
 If Auto Setup in the Advanced2 menu is set to OFF (the 
default setting for this command is ON),...

58
Adjusting the Image Quality
If vertical stripes appear in the projected images, 
and this cannot be fixed using automatic setup, 
you will need to adjust the tracking
 manually 
using the following procedure.
PROCEDURETracking adjustment can be carried out using either the projectors 
control panel or the configuration menus. This procedure explains 
how to use the projectors control panel to adjust the tracking.
For adjustment using the configuration menus: 
See Video - Tracking   p.78
Press the...

59
Adjusting the Image Quality
If flickering, fuzziness or interference appear in 
images that are input from the computer, and this 
cannot be fixed using automatic setup, you will 
need to adjust the sync
 manually using the 
following procedure.
PROCEDURESync adjustment can be carried out using either the projectors 
control panel or the configuration menus. This procedure explains 
how to use the projectors control panel to adjust the sync.
For adjustment using the configuration menus: 
See Video -...