Epson Projector Emp 732 User Manual
Here you can view all the pages of manual Epson Projector Emp 732 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
70
Using the Configuration Menu FunctionsUser’s Guide
Select a sub-menu item.
Tilt the [ ] button on the remote control up and down or press
the [ ] and [ ] buttons on the projectors control panel to
move to the sub-item to be set, and then press the [Enter]
button.
The items that are displayed in the Image menu, Signal
menu and Info menu vary depending on the input source that
is being projected.
Change the setting.
(1) Tilt the [ ] button on the remote control or press the [ ]
and [ ] buttons on...](http://img.usermanuals.tech/thumb/23/89758/w300_epson-emp-732-manual_d-70.png "Page 71
70
Using the Configuration Menu FunctionsUser’s Guide
Select a sub-menu item.
Tilt the [ ] button on the remote control up and down or press
the [ ] and [ ] buttons on the projectors control panel to
move to the sub-item to be set, and then press the [Enter]
button.
The items that are displayed in the Image menu, Signal
menu and Info menu vary depending on the input source that
is being projected.
Change the setting.
(1) Tilt the [ ] button on the remote control or press the [ ]
and [ ] buttons on...")
70 Using the Configuration Menu FunctionsUser’s Guide Select a sub-menu item. Tilt the [ ] button on the remote control up and down or press the [ ] and [ ] buttons on the projectors control panel to move to the sub-item to be set, and then press the [Enter] button. The items that are displayed in the Image menu, Signal menu and Info menu vary depending on the input source that is being projected. Change the setting. (1) Tilt the [ ] button on the remote control or press the [ ] and [ ] buttons on...
Page 72
![Page 72
71
Using the Configuration Menu FunctionsUser’s Guide
Close the menu.
Press the [Menu] button.
6
TIP
Refer to List of Functions for details on the functions of each menu
item.
s
p.56](http://img.usermanuals.tech/thumb/23/89758/w300_epson-emp-732-manual_d-71.png "Page 72
71
Using the Configuration Menu FunctionsUser’s Guide
Close the menu.
Press the [Menu] button.
6
TIP
Refer to List of Functions for details on the functions of each menu
item.
s
p.56")
71 Using the Configuration Menu FunctionsUser’s Guide Close the menu. Press the [Menu] button. 6 TIP Refer to List of Functions for details on the functions of each menu item. s p.56
Page 73
TroubleshootingThis chapter describes how to identify problems and what to do if a problem is found.Using the Help ..................................................... 73 Problems Solving................................................ 75 Reading the Indicators........................................................ 75 Power indicator lights red .......................................................... 75 Lamp or Temp indicator flashes orange .................................... 76 Power...
Page 74
![Page 74
73
User’s Guide
Using the HelpIf a problem occurs with the projector, the Help function uses on-screen
displays to assist you in solving the problem. It uses a series of menus in a
question and answer format.
PROCEDURE
Press the [Help] button.
The help menu will be displayed.Select a menu item.
Tilt the [ ] button on the remote control or press the [ ] and
[ ] buttons on the projectors control panel to select an item.
Confirm the selection.
Press the [Enter] button to confirm the selection of a menu...](http://img.usermanuals.tech/thumb/23/89758/w300_epson-emp-732-manual_d-73.png "Page 74
73
User’s Guide
Using the HelpIf a problem occurs with the projector, the Help function uses on-screen
displays to assist you in solving the problem. It uses a series of menus in a
question and answer format.
PROCEDURE
Press the [Help] button.
The help menu will be displayed.Select a menu item.
Tilt the [ ] button on the remote control or press the [ ] and
[ ] buttons on the projectors control panel to select an item.
Confirm the selection.
Press the [Enter] button to confirm the selection of a menu...")
73 User’s Guide Using the HelpIf a problem occurs with the projector, the Help function uses on-screen displays to assist you in solving the problem. It uses a series of menus in a question and answer format. PROCEDURE Press the [Help] button. The help menu will be displayed.Select a menu item. Tilt the [ ] button on the remote control or press the [ ] and [ ] buttons on the projectors control panel to select an item. Confirm the selection. Press the [Enter] button to confirm the selection of a menu...
Page 75
![Page 75
74
Using the HelpUser’s Guide
Repeat the operations in steps 2 and 3 to proceed
through the menu to more detailed items.
The help menu is cleared when the [Help] button is pressed.
4
TIP
If the Help function does not provide a solution to the problem, refer
to Problem Solving
s
p.75](http://img.usermanuals.tech/thumb/23/89758/w300_epson-emp-732-manual_d-74.png "Page 75
74
Using the HelpUser’s Guide
Repeat the operations in steps 2 and 3 to proceed
through the menu to more detailed items.
The help menu is cleared when the [Help] button is pressed.
4
TIP
If the Help function does not provide a solution to the problem, refer
to Problem Solving
s
p.75")
74 Using the HelpUser’s Guide Repeat the operations in steps 2 and 3 to proceed through the menu to more detailed items. The help menu is cleared when the [Help] button is pressed. 4 TIP If the Help function does not provide a solution to the problem, refer to Problem Solving s p.75
Page 76
75 User’s Guide Problems SolvingIf you are having a problem with the projector, first check the projectors indicators and refer to Reading the Indicators below. If the indicators do not show clearly what the problem might be, refer to When the Indicators Provide No Help. sp.78Reading the Indicators The projector is provided with the following three indicators which indicate the operating status of the projector. The following tables show what the indicators mean and how to remedy problems that they...
Page 77
![Page 77
76
Problems SolvingUser’s Guide
Internal temperature error
(overheating)
The lamp will turn off automatically and projection will stop. Wait for about 5 minutes. After
about 5 minutes the projector will switch to standby mode, so check the following two points.
After checking, press the [Power] button to turn the power back on.
Check that the air filter and air exhaust vent are clear, and that the projector is not positioned
against a wall. sp.16
If the air filters are blocked, clean or replace...](http://img.usermanuals.tech/thumb/23/89758/w300_epson-emp-732-manual_d-76.png "Page 77
76
Problems SolvingUser’s Guide
Internal temperature error
(overheating)
The lamp will turn off automatically and projection will stop. Wait for about 5 minutes. After
about 5 minutes the projector will switch to standby mode, so check the following two points.
After checking, press the [Power] button to turn the power back on.
Check that the air filter and air exhaust vent are clear, and that the projector is not positioned
against a wall. sp.16
If the air filters are blocked, clean or replace...")
76 Problems SolvingUser’s Guide Internal temperature error (overheating) The lamp will turn off automatically and projection will stop. Wait for about 5 minutes. After about 5 minutes the projector will switch to standby mode, so check the following two points. After checking, press the [Power] button to turn the power back on. Check that the air filter and air exhaust vent are clear, and that the projector is not positioned against a wall. sp.16 If the air filters are blocked, clean or replace...
Page 78
77
Problems SolvingUser’s Guide
Lamp replacement notification
Replace the lamp with a new one. sp.101
If you continue to use the lamp after it has passed the replacement period, the possibility that the
lamp may break will increase. Replace the lamp with a new one as soon as possible. The Power
indicator status will vary depending on the projector status at the time.
Power indicator lights green or orange/flashes green or orange
: lit : flashing : off
Status
Cause
Remedy or Status
Standby...
Page 79
![Page 79
78
Problems SolvingUser’s GuideWhen the Indicators Provide No Help
If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem.
No images appear sp.80
Projection does not start, the projection area is completely black, the
projection area is completely blue, etc.Can not switch projection to a video source by pressing the
[Source Search] button sp.80Projection stops automatically sp.81The message Not Supported. is displayed sp.81The...](http://img.usermanuals.tech/thumb/23/89758/w300_epson-emp-732-manual_d-78.png "Page 79
78
Problems SolvingUser’s GuideWhen the Indicators Provide No Help
If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem.
No images appear sp.80
Projection does not start, the projection area is completely black, the
projection area is completely blue, etc.Can not switch projection to a video source by pressing the
[Source Search] button sp.80Projection stops automatically sp.81The message Not Supported. is displayed sp.81The...")
78 Problems SolvingUser’s GuideWhen the Indicators Provide No Help If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem. No images appear sp.80 Projection does not start, the projection area is completely black, the projection area is completely blue, etc.Can not switch projection to a video source by pressing the [Source Search] button sp.80Projection stops automatically sp.81The message Not Supported. is displayed sp.81The...
Page 80
79 Problems SolvingUser’s Guide Mail notification messages are not being sent when a problem occurs with the projector sp.88The projector cannot be monitored and controlled using the EMP Monitor function sp.89An error message is displayed (error message when EMP Monitor is running) sp.97 You cannot connect from another computer when images are being projected during a network connection sp.89 EMP NS Connection starts, but a projector is not found sp.90 Connection cannot be established in access...