Epson Projector Emp 732 User Manual

110
GlossaryUser’s Guide
EMP Link 21L
A utility software program that allows the projector to be connected to a computer so that the computer can be used to control 
the projector. For details on acquiring the software and for instructions on using the software and compatible projector 
models, please visit the Web site http://www.epson.co.uk/support/download/index.htm
.
ESSID
ESS is an abbreviation of Extended Service Set. The ESSID is an identification number for connecting with a counterpart on 
a...

111
GlossaryUser’s Guide
SNMP
This is an abbreviation of Simple Network Management Protocol. It is a protocol in a TCP/IP network for monitoring and 
controlling communication devices on the network, such as routers, computers, and terminals across the network.
Squeeze mode
In this mode, wide-screen images in 16:9 mode are compressed in the horizontal direction so that they are stored on the 
recording medium as 4:3 images.
When these images are played back by the projector in squeeze mode, they are...

112
GlossaryUser’s Guide
WPA
Abbreviation for Wi-Fi Protected Access. This is an encryption standard that improves security which is a weak point of 
WEP
g. TKIP
g is used as the encryption method.
XGA
A type of video signal with a resolution of 1024 (horizontal) × 768 (vertical) dots which is used by IBM PC/AT-compatible 
computers. 

113
User’s Guide
List of ESC/VP21 CommandsCommand List
When a power on command is sent to the projector, the power will turn on 
and the projector will change to warm-up mode. When the power has 
turned on, a colon : (3Ah) will be returned.
When the projector executes a command, it returns a : and waits for the 
next command to be sent.
If command processing terminates with an error, the projector outputs an 
error message and then returns the : code.
* When issuing any of the above commands, tack a...

114
List of ESC/VP21 CommandsUser’s GuideUSB Connection Setup
In order to control the projector using ESC/VP21 commands via a USB 
connection, the following preparations must be carried out.PROCEDURE
Download the USB driver (USB-COM Driver) from the 
EPSON website to your computer.
The URL is as follows.
 http://www.epson.co.uk/support/download/index.htm
.
Install the downloaded USB driver on your computer.
Read the instructions displayed on the download screen.Change the Link 21L setting in the Extended...

115
User’s Guide
List of Supported Monitor Displays
* Connection is not possible if the equipment does not have a VGA output 
port.
The projection of some signals not listed in the table may still be possible. 
However, not all functions may be supported.Computer/RGB Video
Signal
Refresh rate
g 
(Hz)
Resolution 
(dots)
Resolutions for 
resize display
g 
(dots)
VGA
g
60
640
×480
1024
×768
VGAEGA
640
×350
1024
×560
VESA
60/72/75/85,iMac*
640
×480
1024
×768
SVGA
g
56/60/72/75/
85,iMac*
800
×600
1024
×768...

116
User’s Guide
Specifications
*1 The USB connector is not guaranteed to operate correctly with all USB-compatible devices.
*2 Supported Memory Cards by Projectors Card Slot
CompactFlash cards (using a PC card adapter)
ATA Flash cards
Memory Sticks (using a PC card adapter)
Smart Media (using a PC card adapter)
SD/MMC cards (using a PC card adapter)Product name
EMP-745
EMP-737
EMP-740
EMP-732
Dimensions
276 (W) × 70 (H) × 193 (D) mm (not including feet)
Panel size
0.7 inches
Display method...

117
SpecificationsUser’s GuideSafety
USA
UL60950 Third Edition
Canada
CSA C22.2 No.60950 
European Community
The Low Voltage Directive (73/23/EEC)
IEC60950 3
rd Edition
EMC
USA
FCC Part15B Class B (DoC)
Canada
ICES-003 Class B
European Community
The EMC Directive (89/336/EEC)
EN55022, 1998 Class B
EN55024, 1998
IEC/EN61000-3-2, IEC/EN61000-3-3
Australia/New Zealand
AS/NZS CISPR 22:2002 Class B 

118
User’s Guide
Appearance
Units: mm 193
2767540.84*
5.5 70Centre of lens
11
*Distance from center of lens to suspension bracket fixing point14.5
242
12
75.5
3-M4×9 99.6
107.5 

119
User’s Guide
We :EPSON AMERICA, INC.
Located at  :3840 Kilroy Airport Way
 MS: 3-13
 Long Beach, CA 90806
Tel :562-290-5254
Declare under sole responsibility that the product identified herein, 
complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital 
device. Each product marketed, is identical to the representative unit 
tested and found to be compliant with the standards. Records maintained 
continue to reflect the equipment being produced can be expected to be 
within the variation...