Epson Projector Emp 732 User Manual

60
Using the Configuration Menu FunctionsUser’s Guide
 The Tracking
g, Sync.
g, Position and Resize 
settings can not be adjusted if no signals are being input.
 The items displayed in the Signal menu change 
depending on the input signal that is being projected.
Menu commands that do not apply to the current input 
signal cannot be adjusted.
 If using the EMP-745/737, you cannot change any of the 
Signal configuration menu settings while EasyMP is 
running.
Computer/RGB videoSignal Menu
Sub-menu...

61
Using the Configuration Menu FunctionsUser’s Guide
Component video
g
Composite video
g/ S-Video
g
Sub-menu
Function
Default
Position
Moves the image display position vertically and horizontally.
 Press the [Enter] button on the remote control or on the 
projectors control panel and then make the adjustment 
using the display position adjustment screen that appears.
Depends on 
connection
Computer 
Input
(Adjustment is only possible when component video signals 
are being input.)
Selects the input...

62
Using the Configuration Menu FunctionsUser’s Guide
Setting Menu
Sub-menu
Function
Default
Keystone
Corrects vertical keystone distortion in images.
 When keystone correction is carried out, the projected 
image will become smaller.
 If the text part of the image is blurred after keystone 
correction is carried out, decrease the sharpness setting.
Median value 
(0)
Auto 
Keystone
Sets the function for automatically detecting the projector 
angle and correcting keystone ON or OFF when the 
projector...

63
Using the Configuration Menu FunctionsUser’s Guide
EasyMP 
Audio Out
(EMP-745/737 only. Can be used only when projecting using 
EasyMP.)
Select the way to output sound when projecting using 
EasyMP.
Select the External to output the sound from external 
speakers with built-in amplifiers. Select the Internal to 
output the sound from the projectors built-in speaker. 
sp.28
*The audio output to an external speaker is possible only 
when the audio data of scenarios (.wav) or that of MPEG 
files are...

64
Using the Configuration Menu FunctionsUser’s Guide
 The User’s Logo setting can not be adjusted if no 
signals are being input.
Extended Menu
Sub-menu
Function
Default
Display
This lets you make settings related to the projectors display.
Message:
Sets whether display of the following messages is turned 
ON or OFF.
  Signal name when the video signal is switched
  Colour mode name when the colour mode is switched
  When no image signals are being input
  When an incompatible signal is input
...

65
Using the Configuration Menu FunctionsUser’s Guide
Projection
Sets the projection position for the projector.
 Front : Select when the projector is in front of the 
screen.
 Front/Ceiling : Select when the projector is in front of the 
screen and suspended from the ceiling.
 Rear : Select when the projector is behind the 
screen.
 Rear/Ceiling : Select when the projector is behind the 
screen and suspended from the ceiling.
Front
Operation
This lets you make settings related to projector...

66
Using the Configuration Menu FunctionsUser’s Guide
Sub-menu
Function
Default
Standby 
Mode
(EMP-745/737 only)
Set to Network ON to use network monitoring and control 
functions and the standby monitor out function while the 
projector is in standby mode.
To enable the new settings, turn the projectors power off and 
wait until the cool-down
g is finished.
* When set to Network ON, the Power indicator will flash 
orange and then remain orange after disconnecting the 
power plug and reinserting it into...

67
Using the Configuration Menu FunctionsUser’s Guide
 The Info menu shows the setting details for the current 
image source.
 The Lamp Hours item appears as 0H for 0–10 hours, 
and after that, it appears in units of 1 hour.
Computer/RGB Video/Component video
g
Composite video
g/ S-Video
g
Info Menu
Sub-menu
Function
Default
Lamp 
Hours
Displays the cumulative lamp operating time for both 
High Brightness and Low Brightness.
 When the lamp warning period is reached, the display 
characters appear in...

68
Using the Configuration Menu FunctionsUser’s Guide
Reset Menu
Sub-menu
Function
Default
Reset All
Resets all items in all menus to their default settings.
 Press the [Enter] button on the remote control or on the 
projectors control panel.
 To reset settings such as Image or Signal, select Reset 
from the respective sub menus.
 The Computer Input, Video Signal, User’s Logo, 
Lamp Hours and Language settings will not be reset to 
their defaults. However, if Background Color is set to 
Logo or...

69
Using the Configuration Menu FunctionsUser’s GuideUsing the Configuration Menus
The configuration menus can be operated using either the remote control or 
the projectors control panel.PROCEDURE
Press the [Menu] button.
The configuration menu appears.Select a menu item.
Tilt the [ ] button on the remote control up and down or press 
the [ ] and [ ] buttons on the projectors control panel to 
move to the item to be set.
Confirm the selection.
Press the [Enter] button to confirm the selection of a menu...