Epson Projector Emp 732 User Manual

							60
Using the Configuration Menu FunctionsUser’s Guide
 The Tracking
g, Sync.
g, Position and Resize 
settings can not be adjusted if no signals are being input.
 The items displayed in the Signal menu change 
depending on the input signal that is being projected.
Menu commands that do not apply to the current input 
signal cannot be adjusted.
 If using the EMP-745/737, you cannot change any of the 
Signal configuration menu settings while EasyMP is 
running.
Computer/RGB videoSignal Menu
Sub-menu
Function
Default
Auto Setup
Selects whether the automatic adjustment function for 
automatically optimising images when the input source is 
changed is turned ON or OFF.
ON
Tracking
g
Adjusts computer images when vertical stripes appear in the 
images.
Depends on 
connection
Sync.
g
Adjusts computer images when flickering, fuzziness or 
interference appear in the images.
 Flickering and fuzziness may also appear when the 
brightness, contrast
g, sharpness or keystone settings are 
adjusted.
 You can obtain the best results if you adjust the tracking
g 
first and then adjust the sync.
Depends on 
connection
Position
Moves the image display position vertically and horizontally.
 Press the [Enter] button on the remote control or on the 
projectors control panel and then make the adjustment 
using the display position adjustment screen that appears.
Depends on 
connection
Computer 
Input
Selects the input signal in accordance with the equipment 
that is connected to the [Computer/Component Video] port.
If set to Auto the input signal is set automatically in 
accordance with the connected equipment.
If you select Auto, and the colours appear unnatural, select 
Computer.
Auto
Reset
Return the all settings in the Signal menu to their default 
except the Computer Input setting.
 Press the [Enter] button on the remote control or on the 
projectors control panel.
 To return all settings such as the Image and Signal 
menu settings to their default values, select Reset All 
from the Reset menu. sp.68
- 
						

							61
Using the Configuration Menu FunctionsUser’s Guide
Component video
g
Composite video
g/ S-Video
g
Sub-menu
Function
Default
Position
Moves the image display position vertically and horizontally.
 Press the [Enter] button on the remote control or on the 
projectors control panel and then make the adjustment 
using the display position adjustment screen that appears.
Depends on 
connection
Computer 
Input
(Adjustment is only possible when component video signals 
are being input.)
Selects the input signal in accordance with the equipment 
that is connected to the [Computer/Component Video] port.
If set to Auto the input signal is set automatically in 
accordance with the connected equipment.
If you select Auto, and the colours appear unnatural, select 
Component Video.
Auto
Vi d e o  
Signal
(Adjustment is only possible when composite video/S-Video 
signals are being input.)
Sets the video signal format.
 Press the [Enter] button on the remote control or on the 
projectors control panel and then make the selection from 
the video signal format selection menu that appears.
 When set to Auto, the video signal format is set 
automatically.
Auto
Resize
Sets the aspect ratio for projected images.
Depends on 
connection 
Reset
Returns Position and Resize settings in the Signal 
menu to their default settings.
 Press the [Enter] button on the remote control or on the 
projectors control panel.
 To return all settings such as the Image and Signal 
menu settings to their default values, select Reset All 
from the Reset menu. sp.68
- 
						

							62
Using the Configuration Menu FunctionsUser’s Guide
Setting Menu
Sub-menu
Function
Default
Keystone
Corrects vertical keystone distortion in images.
 When keystone correction is carried out, the projected 
image will become smaller.
 If the text part of the image is blurred after keystone 
correction is carried out, decrease the sharpness setting.
Median value 
(0)
Auto 
Keystone
Sets the function for automatically detecting the projector 
angle and correcting keystone ON or OFF when the 
projector is tilted vertically.
This function is only enabled when the Projection 
command in the Extended menu is set to Front. If it is set 
to something other than Front, this menu cannot be 
selected.
ON
Operation 
Lock
When set to ON, the operation of all buttons on the 
projectors control panel except for the [Power] button will 
be disabled.
 When Operation Lock is set to ON, the operation lock 
function can be cancelled by holding down the [Enter] 
button on the projectors control panel for approximately 7 
seconds.
 If you change the setting, the new setting will take effect 
after exiting the configuration menu.
OFF
Pointer 
Shape
The shape of the pointer icon that appears when you press 
the [Pointer] button on the remote control can be selected 
from the following three shapes.
Pointer 1:           Pointer 2:           Pointer 3: 
Pointer 1
Brightness 
Control
This lets you set the lamp brightness to one of two settings.
Select Low if the images being projected are too bright 
such as when projecting images in a dark room or onto a 
small screen.
When Low is selected, the brightness of the images is 
reduced, the amount of electricity consumed and noise 
produced during projection are reduced and the lamps 
operating life is extended.
Low
(Varies 
depending on 
country of 
purchase)
Volume
Adjusts the volume.
Median value 
(10) 
						

							63
Using the Configuration Menu FunctionsUser’s Guide
EasyMP 
Audio Out
(EMP-745/737 only. Can be used only when projecting using 
EasyMP.)
Select the way to output sound when projecting using 
EasyMP.
Select the External to output the sound from external 
speakers with built-in amplifiers. Select the Internal to 
output the sound from the projectors built-in speaker. 
sp.28
*The audio output to an external speaker is possible only 
when the audio data of scenarios (.wav) or that of MPEG 
files are played back by Card Player.
Internal
Reset
Resets all adjustment values for the Setting menu functions 
to their default settings.
 Press the [Enter] button on the remote control or on the 
projectors control panel.
 To return all settings such as the Image and Signal 
menu settings to their default values, selectReset All from 
the Reset menu. sp.68
-
Sub-menu
Function
Default 
						

							64
Using the Configuration Menu FunctionsUser’s Guide
 The User’s Logo setting can not be adjusted if no 
signals are being input.
Extended Menu
Sub-menu
Function
Default
Display
This lets you make settings related to the projectors display.
Message:
Sets whether display of the following messages is turned 
ON or OFF.
  Signal name when the video signal is switched
  Colour mode name when the colour mode is switched
  When no image signals are being input
  When an incompatible signal is input
  When the air filter needs replacing
Background Color:
Sets the screen status when the [A/V Mute] button on the 
remote control is being pressed or when no image signals 
are being input to Black, Blue or Logo.
  To change the users logo, you need to record your own 
logo. sp.105
  If the User’s Logo Protect function of Password Protect 
has been set to ON, the Logo setting cannot be 
changed from Logo to Black or Blue, or from 
Black or Blue to Logo. Cancel the Password 
Protect function before changing these settings. sp.33
Startup Screen:
Sets whether the startup screen is displayed or not.
To change the users logo, you need to record your own 
users logo. sp.105
This cannot be changed from enabled (ON) to disabled 
(OFF) if the User’s Logo Protect function of Password 
Protect has been set to ON. Cancel the Password Protect 
function before changing the setting. sp.33
Message: ON
Background 
Color: 
Blue
Startup Screen: 
ON
User’s 
Logo
Records a users logo. sp.105
 Press the [Enter] button on the remote control or on the 
projectors control panel and then follow the instructions 
that appear on the screen.
 A users logo cannot be recorded if the User’s Logo 
Protect function of Password Protect has been set to ON. 
Cancel the Password Protect function before recording a 
users logo. sp.33
EPSON logo 
						

							65
Using the Configuration Menu FunctionsUser’s Guide
Projection
Sets the projection position for the projector.
 Front : Select when the projector is in front of the 
screen.
 Front/Ceiling : Select when the projector is in front of the 
screen and suspended from the ceiling.
 Rear : Select when the projector is behind the 
screen.
 Rear/Ceiling : Select when the projector is behind the 
screen and suspended from the ceiling.
Front
Operation
This lets you make settings related to projector operation.
Direct Power ON: 
When the projectors power cable is connected, projection 
starts without needing to press the [Power] button.
* When Direct Power ON is set to ON, turn the power 
off by pressing the [Power] button, then wait for the cool-
down
g period to finish and then disconnect the power 
cable. If the power cable is left connected to the wall 
outlet when Direct Power ON is set to ON, the 
projector will turn on if a power outage occurs and then 
the power is restored.
Sleep Mode: 
Sets the energy saving operation when no signal is being 
input.
  When set to ON, projection stops automatically and 
then after the cool-down
g period is finished, the 
projector changes to sleep mode if no operations are 
carried out for 30 minutes while the No Signal. 
message is being displayed. (The Power indicator lights 
orange.)
  Projection starts again when the [Power] button is 
pressed.
Direct Power 
ON: OFF
Sleep Mode: 
OFF
Sub-menu
Function
Default 
						

							66
Using the Configuration Menu FunctionsUser’s Guide
Sub-menu
Function
Default
Standby 
Mode
(EMP-745/737 only)
Set to Network ON to use network monitoring and control 
functions and the standby monitor out function while the 
projector is in standby mode.
To enable the new settings, turn the projectors power off and 
wait until the cool-down
g is finished.
* When set to Network ON, the Power indicator will flash 
orange and then remain orange after disconnecting the 
power plug and reinserting it into the electrical outlet.
Network OFF
Link21L
Sets whether the EMP Link21L
g utility software is being 
used or not.
To enable the EMP Link21L, turn the projectors power off 
and wait until the cool-down
g is finished.
OFF
Language
Sets the language for message displays.
 Press the [Enter] button on the remote control or on the 
projectors control panel and then make the selection.
English
(Varies 
depending on 
country of 
purchase)
Reset
Returns Display and Operation settings in the 
Extended menu to their default settings.
However, if Background Color has been set to Logo or if 
Startup Screen has been set to OFF, the settings will not 
be returned to their defaults if User’s Logo Protect is set to 
ON. sp.33
 Press the [Enter] button on the remote control or on the 
projectors control panel.
 To return all settings such as the Image and Signal 
menu settings to their default values, select Reset All 
from the Reset menu. sp.68
- 
						

							67
Using the Configuration Menu FunctionsUser’s Guide
 The Info menu shows the setting details for the current 
image source.
 The Lamp Hours item appears as 0H for 0–10 hours, 
and after that, it appears in units of 1 hour.
Computer/RGB Video/Component video
g
Composite video
g/ S-Video
g
Info Menu
Sub-menu
Function
Default
Lamp 
Hours
Displays the cumulative lamp operating time for both 
High Brightness and Low Brightness.
 When the lamp warning period is reached, the display 
characters appear in red.
0H
Source
Displays the input source which is currently being projected.
Input 
Signal
Displays the input signal settings. 
(Does not appear when the input source is Composite Video, 
S-Video or EasyMP.)
Resolution
Displays the input resolution.  
(Does not appear when the input source is Composite Video, 
S-Video or EasyMP.)
-
Vi d e o  
Signal
Shows the video signal format.
(Does not appear when the input source is Computer, RGB 
video, Component Video or EasyMP.)
-
Refresh Rate
g
Displays the refresh rate. 
(Does not appear when the input source is Composite Video, 
S-Video or EasyMP.)
-
Sync.
g 
Info
Informations in this menu may be required in case that you 
ask for service to your dealer or the nearest address provided 
at International Warranty Conditions section of the Safety 
Instructions/World Wide Warranty Terms
 booklet. 
(Does not appear when the input source is Composite Video, 
S-Video or EasyMP.)
- 
						

							68
Using the Configuration Menu FunctionsUser’s Guide
Reset Menu
Sub-menu
Function
Default
Reset All
Resets all items in all menus to their default settings.
 Press the [Enter] button on the remote control or on the 
projectors control panel.
 To reset settings such as Image or Signal, select Reset 
from the respective sub menus.
 The Computer Input, Video Signal, User’s Logo, 
Lamp Hours and Language settings will not be reset to 
their defaults. However, if Background Color is set to 
Logo or Startup Screen is set to OFF, these settings 
will not be returned to their defaults when User’s Logo 
Protect is set to ON. 
sp.33
-
Lamp-
Hours 
Reset
Initialises the lamp operating time. When this command is 
selected, the cumulative lamp operating time is reset to the 
initial default value.
- 
						

							69
Using the Configuration Menu FunctionsUser’s GuideUsing the Configuration Menus
The configuration menus can be operated using either the remote control or 
the projectors control panel.PROCEDURE
Press the [Menu] button.
The configuration menu appears.Select a menu item.
Tilt the [ ] button on the remote control up and down or press 
the [ ] and [ ] buttons on the projectors control panel to 
move to the item to be set.
Confirm the selection.
Press the [Enter] button to confirm the selection of a menu item.
1
Projector Remote control
2
3