Home > Epson > Projector > Epson Projector Emp 732 User Manual

Epson Projector Emp 732 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Projector Emp 732 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							User’s Guide 
    						
    							1
    User’s Guide
    Projector FeaturesThe following six preset colour modes are provided so that you can easily 
    obtain optimum images simply by selecting a Colour mode.
    In addition, if projecting onto blackboards rather than projection screens in 
    places such as schools, you can select the Blackboard setting to allow 
    images to be projected in their natural tints.
    sp.47, p.56, p.58
    • Dynamic   Presentation  Theatre
     Living Room   sRGB
    g Blackboard
    The projector is compact B5 size (19.3 (D) × 27.6 (W) × 7 (H) cm) and 
    lightweight (EMP-745/737 : approx. 1.8 kg, EMP-740/732 : approx. 1.7 kg). 
    Easy to carry it with the included Soft carrying case which has a pocket to 
    put cables and other accessories.
    Despite its compact size, the projector can display images at high resolutions 
    with a high degree of luminance, providing beautifully clear images even in 
    bright environments.The brightness of the lamp can be set to one of two settings. 
    Fine and clear images can be obtained even in a bright room like a 
    conference room and a classroom.
    If projecting images in a dark room or onto a small screen and the images are 
    too bright, change the setting to Low.
    The advantages of the Low setting are
     Reduction in power consumption of approximately 20%
     Reduction in operating noise of approximately 12%
     Approximately 1.5 times longer lamp life
    sp.62
    The vertical angle of the projector is detected, so that any vertical keystone 
    distortion in the projected images can be automatically corrected. sp.41
    Automatically detects images input from connected equipment. You can 
    switch between the images with just a single touch of a button. sp.37
    Colour mode function
    Presentation
    Blackboard
    Living Room
    Compact and lightweightBrilliant, attractive images
    Brightness ControlAutomatic keystone correction functionEasy Selection of Projection Images 
    						
    							2
    Projector FeaturesUser’s Guide
    The accessory remote control can be used to carry out operations such as 
    pausing projection (Freeze function sp.51), zooming in on important parts 
    of images (E-Zoom function sp.52) and pointing out important parts of 
    images using a pointer icon (Pointer function sp.53).
    In addition, the remote control can be used to move the pointer around on the 
    computer screen during projection (Wireless Mouse Function sp.22). 
    You can make the projector turn on and be ready to project images simply by 
    connecting the power cable. You can also turn the power on for projectors in 
    places such as meeting rooms where the power is centrally controlled, 
    simply by turning the power on at the central control point. 
    s
    p.65
    This function locks the buttons on the projectors control panel.
    This function is useful at times such as during shows and exhibitions, or in 
    places such as schools to limit the range of buttons that can be used. sp.54Password protection function allows you to limit the use of the projector. 
    This means that the projector cannot be used if it is taken without 
    authorisation, and thus serves as a theft-prevention feature. sp.31
    Easy to OperateDirect Power OnOperation Lock
    Password protect function assists administration 
    and theft prevention
    [XXXXXXX] XXXX XXX XXXXX.#XXXX XX XXX XXXX XXXX XXX XX.[0-9]:XXXX 
    						
    							3
    Projector FeaturesUser’s Guide
    (EMP-745/737 only)
    When something goes wrong with the projector, such as a lamp blowing 
    during projection, the projector can notify you of the error via e-mail.
    In addition, by using EasyMP…
     Make easy network 
    connection with a computer 
    via a wireless LAN.
     Project a computers image
    over a network.
    sFor instructions on how to use EasyMP, refer to EasyMP Network Setup 
    Guide and EasyMP Operation Guide.
    (EMP-745/737 only)
    As well as a USB-compatible digital camera, you can use a USB-compatible 
    hard disc and a USB-compatible memory device. This allows you to make a 
    presentation without having a computer connected to the projector. sp.29, 
    Showing the Presentation (Using the CardPlayer) in the EasyMP 
    Operation GuideNetwork SupportLarge-volume USB Storage is Available to Use 
    						
    							4
    User’s Guide
    Contents
    Projector Features .................................................................. 1
    Before Using the Projector
    Part Names and Functions ..................................................... 7
    Front/Top .................................................................................... 7
    Control Panel .............................................................................. 8
    Rear ............................................................................................. 9
    Base ........................................................................................... 10
    Remote Control ......................................................................... 11
    Before Using the Remote Control ........................................ 12
    Inserting the Batteries ............................................................... 12
    Using the Remote Control and Remote Operating Range ........ 13
    Installation ............................................................................ 15
    Setting Up the Projector ............................................................ 15
    Screen Size and Projection Distance......................................... 16
    Inserting and Removing Cards (EMP-745/737 only) ............ 17
    Installation................................................................................. 17
    Removal .................................................................................... 18
    Access Lamp Status .................................................................. 19
    Connecting to a Computer ................................................... 20
    Eligible Computers ................................................................... 20
    Projecting Images from a Computer ......................................... 21
    Using the Remote Control to Operate the Mouse Pointer 
    (Wireless Mouse Function) ..................................................... 22
    Connecting to a Video Source.............................................. 24
    Projecting Composite Video Images ........................................ 24
    Projecting S-Video Images ....................................................... 25
    Projecting Component Video Images ....................................... 25
    Projecting RGB Video Images.................................................. 26
    Playing Sound from Video Equipment.................................. 27Playing Sound from External Speakers 
    (EMP-745/737 only) ............................................................. 28
    Connecting USB Devices (Digital Camera, 
    Hard Disk Drive or Memory Devices) 
    (EMP-745/737 only) ............................................................. 29
    Connecting USB Devices .......................................................... 29
    Disconnecting a USB Device from the Projector...................... 30
    Preventing theft (Password Protect) .................................... 31
    When Password Protect is enabled............................................ 31
    Setting Password Protect ........................................................... 32
    Basic Operations
    Turning the Projector On...................................................... 35
    Connecting the Power Cable ..................................................... 35
    Turning the Power On and Projecting Images .......................... 36
    Turning the Projector Off...................................................... 38
    Adjusting the Screen Image ................................................. 40
    Adjusting the Image Size (Zoom Function) .............................. 40
    Focusing the Screen Image ....................................................... 40
    Adjusting the Image Angle and Automatic Keystone 
    Correction Function ................................................................. 41
    Manually Correcting Keystone Distortion ................................ 43
    Adjusting the Image Quality ................................................. 44
    Adjusting Computer Images and RGB Video Images .............. 44
    Selecting the Projection Quality 
    (Colour Mode Selection).......................................................... 47
    Adjusting the Volume ........................................................... 48 
    						
    							5
    User’s Guide
    Advanced Operations
    Functions for Enhancing Projection...................................... 50
    A/V Mute .................................................................................. 50
    Freeze ........................................................................................ 51
    Wide-screen Projection of Images from Video Equipment 
    (Changing the Aspect Ratio) ................................................... 51
    E-Zoom ..................................................................................... 52
    Pointer function......................................................................... 53
    Operation Button Lock Function .............................................. 54
    Using the Configuration Menu Functions ............................. 55
    List of Functions ....................................................................... 56
    Using the Configuration Menus ................................................ 69
    Troubleshooting
    Using the Help ...................................................................... 73
    Problems Solving ................................................................. 75
    Reading the Indicators .............................................................. 75
    When the Indicators Provide No Help ...................................... 78
    Appendices
    Maintenance ........................................................................ 99
    Cleaning .................................................................................... 99
    Replacing Consumables .......................................................... 100
    Saving a Users Logo ......................................................... 105
    Optional Accessories and Consumables ........................... 108
    Glossary ............................................................................. 109
    List of ESC/VP21 Commands ............................................ 113
    Command List ......................................................................... 113
    USB connection....................................................................... 113
    USB Connection Setup............................................................ 114
    List of Supported Monitor Displays .................................... 115
    Specifications ..................................................................... 116
    Appearance........................................................................ 118 
    						
    							Before Using the ProjectorThis chapter describes the procedures for setting up the projector before use.Part Names and Functions................................... 7
    • Front/Top ...............................................................................7
     Control Panel .........................................................................8
     Rear ........................................................................................9
     Base.......................................................................................10
     Remote Control ...................................................................11
    Before Using the Remote Control ..................... 12
     Inserting the Batteries ........................................................ 12
     Using the Remote Control and Remote Operating 
    Range .................................................................................... 13 Using the Remote Control ......................................................... 13
     Remote Operating Range........................................................... 14
    Installation ........................................................... 15
     Setting Up the Projector ..................................................... 15
     Screen Size and Projection Distance..................................16
    Inserting and Removing Cards 
    (EMP-745/737 only) ............................................. 17
     Installation ........................................................................... 17
     Removal................................................................................18
     Access Lamp Status ............................................................19 Card Slot Access Lamp Status................................................... 19
     Wireless LAN Card Access Lamp Status .................................. 19
    Connecting to a Computer ................................. 20
     Eligible Computers .............................................................20 Projecting Images from a Computer ................................ 21
     If the Monitor Port is a Mini D-Sub 15-pin Port (Example) ......21 Using the Remote Control to Operate the Mouse Pointer 
    (Wireless Mouse Function) ................................................ 22
    Connecting to a Video Source ........................... 24
     Projecting Composite Video Images ................................. 24
     Projecting S-Video Images ................................................. 25
     Projecting Component Video Images ............................... 25
     Projecting RGB Video Images........................................... 26
    Playing Sound from Video Equipment .............. 27
    Playing Sound from External Speakers 
    (EMP-745/737 only) ............................................. 28
    Connecting USB Devices (Digital Camera, 
    Hard Disk Drive or Memory Devices) 
    (EMP-745/737 only) ............................................. 29
     Connecting USB Devices .................................................... 29
     Disconnecting a USB Device from the Projector ............. 30
    Preventing theft (Password Protect) ................. 31
     When Password Protect is enabled ................................... 31 When Power ON Protect is enabled (ON) ..............................31
     If the Timer Setting is for One Hour or More .........................32
     When User’s Logo Protect is enabled (ON)............................32 Setting Password Protect ................................................... 32 
    						
    							7
    User’s Guide
    Part Names and FunctionsFront/Top
    •Control panel s
    p.8
    •Zoom ring s
    p.40Adjusts the image size.
    •Remote control light-receiving 
    area s
    p.13Receives signals from the remote control.•Power indicator s
    p.75Flashes or lights in different colours to 
    indicate the operating status of the projector.
    •Front adjustable foot s
    p.41Extend and retract to adjust the projection 
    angle when the projector is placed on a 
    surface such as a shelf.
    •Lens coverAttach when not using the projector to 
    prevent the lens from becoming dirty or 
    damaged.
    •Focus ring s
    p.40Adjusts the image focus.•Foot adjust lever s
    p.41Pull out the foot lever to extend and retract the 
    front foot.
    •Lamp indicator s
    p.75Flashes or lights in different colours to 
    indicate problems with the projection lamp.
    •Air exhaust ventDo not touch during or immediately 
    after projection, as it can become hot.
    •Temperature indicator s
    p.75Flashes or lights in different colours to 
    indicate problems with the internal 
    temperature of the projector.
    •Card slot (EMP-745/737 only)  
    s
    p.17Insert a LAN card or memory card in here 
    when using EasyMP.
    •Security lock ( ) s
    p.110 
    						
    							8
    Part Names and FunctionsUser’s GuideControl Panel•[Power] button 
    s
    p.36, p.38Turns the projector power on or off.•[Help] button s
    p.73Each time this button is pressed, it displays or 
    hides the online help menu that can assist you 
    if you have a problem.
    •[Menu] button s
    p.69Displays or hides the 
    configuration menu.•[Esc] button s
    p.23Stops the current function.
    Displays the previous screen or 
    menu while viewing a configuration 
    menu. 
    •[Source Search] button s
    p.37The next input source is searched for 
    automatically in the following order and the 
    image input from the connected equipment is 
    projected each time this button is pressed. 
    [Computer/Component Video] port
    [S-Video] port
    [Video] port
    [EasyMP] (EMP-745/737 only)
    •[] [] button s
    p.42, p.69, p.73Press to correct keystone distortion.
    If a configuration menu or help screen is 
    displayed, it selects menu items and setting 
    values.
    •[ ] [ ] button s
    p.48, p.73Press to adjust the sound volume. If a 
    configuration menu or help screen is displayed, 
    it selects menu items and setting values.
    •[Enter] button s
    p.44, 
    p.69, p.73Automatically adjusts analogue 
    RGB images from computers and 
    RGB video images to the optimum 
    display.
    If a configuration menu or help 
    screen is displayed, it accepts the 
    current selection and moves on to 
    the next-lowest level. 
    						
    							9
    Part Names and FunctionsUser’s GuideRear•Remote control light-receiving 
    area s
    p.13Receives signals from the remote control.•Power inlet s
    p.35Connects to the power cable.
    •[Computer/Component Video] port 
    s
    p.21, p.25, p.26Input analogue RGB video signals from a computer 
    and RGB video signals and component video
    g 
    signals from other video sources.
    •[Video] port s
    p.24Inputs composite video
    g signals to the 
    projector from other video sources.
    •[S-Video] port s
    p.25Inputs S-Video
    g signals to the projector 
    from other video sources.
    •[USB TypeB] port s
    p.22, p.113Connects the projector to a computer via the 
    USB
    g cable when using the wireless mouse 
    function.
    This port cannot be used for receiving 
    images from your computer via USB.
    •Speaker
    •[Audio] port s
    p.27Input audio signals from connected equipment. When 
    projecting using the CardPlayer function of EasyMP, 
    this port can be used to output the audio signals to 
    external speakers by setting EasyMP Audio Out. 
    (EMP-745/737 only)
     s
    p.63 
    •Rear adjustable foot 
    s
    p.42
    •Rear adjustable foot•[USB TypeA] port 
    (EMP-745/737 only) 
    s
    p.29
    Connects a digital camera or USB hard disc/
    memory device to project image/movie files 
    or scenarios from such media using the 
    CardPlayer function of EasyMP. 
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Projector Emp 732 User Manual