Epson Projector Emp 732 User Manual
Here you can view all the pages of manual Epson Projector Emp 732 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
30
Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-745/737 only)User’s GuideDisconnecting a USB Device from the Projector
After projection has finished, disconnect the USB device from the
projector by following the procedure below.PROCEDURE
Position the cursor with the EJECT button on the
CardPlayer screen and press the [Enter] button on
the remote control to close CardPlayer. sShowing
the Presentation (Using the CardPlayer) in the
EasyMP Operation GuideDisconnect...](http://img.usermanuals.tech/thumb/23/89758/w300_epson-emp-732-manual_d-30.png "Page 31
30
Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-745/737 only)User’s GuideDisconnecting a USB Device from the Projector
After projection has finished, disconnect the USB device from the
projector by following the procedure below.PROCEDURE
Position the cursor with the EJECT button on the
CardPlayer screen and press the [Enter] button on
the remote control to close CardPlayer. sShowing
the Presentation (Using the CardPlayer) in the
EasyMP Operation GuideDisconnect...")
30 Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-745/737 only)User’s GuideDisconnecting a USB Device from the Projector After projection has finished, disconnect the USB device from the projector by following the procedure below.PROCEDURE Position the cursor with the EJECT button on the CardPlayer screen and press the [Enter] button on the remote control to close CardPlayer. sShowing the Presentation (Using the CardPlayer) in the EasyMP Operation GuideDisconnect...
Page 32
31 User’s Guide Preventing theft (Password Protect)When the Password Protect function is activated, people who do not know the password cannot use the projector to project images when the power is turned on. Furthermore, the users logo that is displayed on the background of the screen cannot be changed. This is to deter theft.When Password Protect is enabled When the power is turned on for the first time after the projectors power cable is connected to the electrical outlet, or when Direct Power On...
Page 33
32 Preventing theft (Password Protect)User’s Guide The password entry screen will not be displayed at all when the power is turned on until the length of time that has been set has elapsed. When the set length of time has elapsed, the password entry screen will be displayed each time the power is turned on. The length of time referred to here is the total illumination time for the projectors lamp from the point when the projectors menu is closed. If Timer is set to 0, the password entry screen will...
Page 34
![Page 34
33
Preventing theft (Password Protect)User’s Guide
Turn Power ON Protect on.
(1) Select Power ON Protect, and then press the [Enter]
button.
(2) Select ON, and then press the [Enter] button.
(3) Press the [Esc] button.Timer setting allows you to specify the time interval
for password prompt.
If you dont use this setting, proceed to step 4.
(1) Select Timer and then press the [Enter] button.
(2) While holding down the [Num] button, use the numeric
keypad buttons to enter the setting time within the...](http://img.usermanuals.tech/thumb/23/89758/w300_epson-emp-732-manual_d-33.png "Page 34
33
Preventing theft (Password Protect)User’s Guide
Turn Power ON Protect on.
(1) Select Power ON Protect, and then press the [Enter]
button.
(2) Select ON, and then press the [Enter] button.
(3) Press the [Esc] button.Timer setting allows you to specify the time interval
for password prompt.
If you dont use this setting, proceed to step 4.
(1) Select Timer and then press the [Enter] button.
(2) While holding down the [Num] button, use the numeric
keypad buttons to enter the setting time within the...")
33 Preventing theft (Password Protect)User’s Guide Turn Power ON Protect on. (1) Select Power ON Protect, and then press the [Enter] button. (2) Select ON, and then press the [Enter] button. (3) Press the [Esc] button.Timer setting allows you to specify the time interval for password prompt. If you dont use this setting, proceed to step 4. (1) Select Timer and then press the [Enter] button. (2) While holding down the [Num] button, use the numeric keypad buttons to enter the setting time within the...
Page 35
Basic OperationsThis chapter describes basic operations such as turning the projector on and off and adjusting the projected images.Turning the Projector On .................................... 35 Connecting the Power Cable .............................................. 35 Turning the Power On and Projecting Images ................. 36 Turning the Projector Off ................................... 38 Adjusting the Screen Image .............................. 40 Adjusting the Image Size (Zoom...
Page 36
35 User’s Guide Turning the Projector OnTurn the power on to start projecting images.Connecting the Power Cable PROCEDURE Check that the power is turned off for the projector and all components connected to the projector.Connect the computer or other video source to the projector. sp.20, p.24Remove the lens cover. Hold the lens cover by the knob in the middle of the cover and remove it. Connect the accessory power cable to the projector. Check that the power cable connector is facing the same way as...
Page 37
![Page 37
36
Turning the Projector OnUser’s GuideTurning the Power On and Projecting Images
PROCEDURE
Check that the Power indicator has stopped flashing
and is lit orange.Turn the power on for all equipment connected to the
projector.
For a video source, press the [Play] button at the video source to
start playback if necessary.
Press the [Power] button on either the projectors
control panel or the remote control to turn the
projectors power on.
A beep will sound to indicate that the projector is starting...](http://img.usermanuals.tech/thumb/23/89758/w300_epson-emp-732-manual_d-36.png "Page 37
36
Turning the Projector OnUser’s GuideTurning the Power On and Projecting Images
PROCEDURE
Check that the Power indicator has stopped flashing
and is lit orange.Turn the power on for all equipment connected to the
projector.
For a video source, press the [Play] button at the video source to
start playback if necessary.
Press the [Power] button on either the projectors
control panel or the remote control to turn the
projectors power on.
A beep will sound to indicate that the projector is starting...")
36 Turning the Projector OnUser’s GuideTurning the Power On and Projecting Images PROCEDURE Check that the Power indicator has stopped flashing and is lit orange.Turn the power on for all equipment connected to the projector. For a video source, press the [Play] button at the video source to start playback if necessary. Press the [Power] button on either the projectors control panel or the remote control to turn the projectors power on. A beep will sound to indicate that the projector is starting...
Page 38
![Page 38
37
Turning the Projector OnUser’s Guide
If more than one external device is connected to the
projector, use the remote control or projector control
panel buttons to select the image source to be
projected while referring to the following table.
The input source can also be searched for and
projected automatically each time the [Source
Search] button is pressed.
*1 Displays the selected source as the Computer Input - Signal in the
configuration menu.
*2 Only changes when using the EMP-745/737....](http://img.usermanuals.tech/thumb/23/89758/w300_epson-emp-732-manual_d-37.png "Page 38
37
Turning the Projector OnUser’s Guide
If more than one external device is connected to the
projector, use the remote control or projector control
panel buttons to select the image source to be
projected while referring to the following table.
The input source can also be searched for and
projected automatically each time the [Source
Search] button is pressed.
*1 Displays the selected source as the Computer Input - Signal in the
configuration menu.
*2 Only changes when using the EMP-745/737....")
37 Turning the Projector OnUser’s Guide If more than one external device is connected to the projector, use the remote control or projector control panel buttons to select the image source to be projected while referring to the following table. The input source can also be searched for and projected automatically each time the [Source Search] button is pressed. *1 Displays the selected source as the Computer Input - Signal in the configuration menu. *2 Only changes when using the EMP-745/737....
Page 39
![Page 39
38
User’s Guide
Turning the Projector OffFollow the procedure below to turn the projectors power off.
PROCEDURE
Turn the power off for the signal sources that are
connected to the projector.
Check that the power for all connected components has been
turned off.Press the [Power] button.
The following confirmation message will appear.
If you do not want to turn the power off, press any button except
the [Power], [Page down], [Page up] and [Num] button.
If you do not press any button, the message will...](http://img.usermanuals.tech/thumb/23/89758/w300_epson-emp-732-manual_d-38.png "Page 39
38
User’s Guide
Turning the Projector OffFollow the procedure below to turn the projectors power off.
PROCEDURE
Turn the power off for the signal sources that are
connected to the projector.
Check that the power for all connected components has been
turned off.Press the [Power] button.
The following confirmation message will appear.
If you do not want to turn the power off, press any button except
the [Power], [Page down], [Page up] and [Num] button.
If you do not press any button, the message will...")
38 User’s Guide Turning the Projector OffFollow the procedure below to turn the projectors power off. PROCEDURE Turn the power off for the signal sources that are connected to the projector. Check that the power for all connected components has been turned off.Press the [Power] button. The following confirmation message will appear. If you do not want to turn the power off, press any button except the [Power], [Page down], [Page up] and [Num] button. If you do not press any button, the message will...
Page 40
![Page 40
39
Turning the Projector OffUser’s Guide
If the projector is not being used, it is recommended
that you unplug the power cable from the electrical
outlet.Attach the lens cover.
Attach the lens cover to the lens when not using the projector, in
order to prevent the lens from getting dusty or dirty.TIP
If the Power indicator is flashing orange, operation of the [Power]
buttons is disabled. Wait until the indicator lights continuously.
If Standby Mode in the configuration menu is set to Network
ON,...](http://img.usermanuals.tech/thumb/23/89758/w300_epson-emp-732-manual_d-39.png "Page 40
39
Turning the Projector OffUser’s Guide
If the projector is not being used, it is recommended
that you unplug the power cable from the electrical
outlet.Attach the lens cover.
Attach the lens cover to the lens when not using the projector, in
order to prevent the lens from getting dusty or dirty.TIP
If the Power indicator is flashing orange, operation of the [Power]
buttons is disabled. Wait until the indicator lights continuously.
If Standby Mode in the configuration menu is set to Network
ON,...")
39 Turning the Projector OffUser’s Guide If the projector is not being used, it is recommended that you unplug the power cable from the electrical outlet.Attach the lens cover. Attach the lens cover to the lens when not using the projector, in order to prevent the lens from getting dusty or dirty.TIP If the Power indicator is flashing orange, operation of the [Power] buttons is disabled. Wait until the indicator lights continuously. If Standby Mode in the configuration menu is set to Network ON,...