Epson Projector BrightLink 536Wi User Manual

Setting
OptionsDescription
Display MessagesSelects various display options
Display Background Messages: controls whether
messages are displayed on the
Startup Screen
screen
A/V Mute Display Background: selects
Toolbars the screen color or logo to
display when no signal is
Pen Mode Icon
received
Projector Control Startup Screen: controls
whether a special screen
appears when the projector starts
up
A/V Mute: selects the screen
color or logo to display when A/V
Mute is turned on
Toolbars: controls whether...

Setting
OptionsDescription
Projection FrontSelects the way the projector
faces the screen so the image is
Front/Ceiling
oriented correctly
Rear
Rear/Ceiling
Operation Direct Power OnSelects various operation options
High Altitude Mode Direct Power On: lets you turn
on the projector without pressing
Startup Source Search
the power button
Auto Power On High Altitude Mode: regulates
the projector’s operating
temperature at altitudes above
4921 feet (1500 m)
Startup Source Search:
automatically detects the...

Setting
OptionsDescription
A/V Settings A/V OutputSelects the following when the
projector is in standby mode
Audio Output
(turned off):
HDMI Audio Output A/V Output: theAlways On
setting indicates that the
projector outputs audio and video
signals even while it is in standby
mode; available only when
Standby Mode is set to
Communication On
Audio Output: selects the audio
input port when projecting
images from the Computer1,
Computer2, S-Video,Video,
and USB-A ports
HDMI Audio Output: selects
which Audio...

Setting
OptionsDescription
Language Various languages available Selects the language for
projector menu and message
displays (not changed byReset
option)
Parent topic: Adjusting the Menu Settings
Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring
and control over a network.
Setting OptionsDescription
Wireless Mode Wireless LAN OnTurns wireless LAN features on
and off
Off
154 

Setting
OptionsDescription
Net. Info - Wireless LAN Connection mode Displays wireless network status
and details
Wireless LAN Sys.
Antenna Level
Projector Name
SSID
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Region Code
Net. Info - Wired LAN Projector NameDisplays wired network status
and details
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Network Configuration Accesses additional network Configures your network settings
menus
Parent topic: Adjusting the Menu Settings
Related...

Projector Setup Settings - ECO Menu
Settings on the ECO menu let you customize projector functions to save power. When you select a
power-saving setting, a leaf icon appears next to the menu item.
Setting OptionsDescription
Power Consumption NormalSelects the brightness mode of
the projector lamp
ECO
Normal: sets maximum lamp
brightness
ECO: reduces lamp brightness
and fan noise, and saves power
and lamp life
Light Optimizer OnWhenPower Consumption is
set to Normal andAuto Iris is
Off
turned off, the...

Setting
OptionsDescription
Sleep Mode Timer 1 to 30 minutesSets the interval for Sleep Mode
A/V Mute Timer OnAutomatically turns off the
projector after 30 minutes if
Off
A/V Muteis enabled
Standby Mode Communication OnEnable this setting to allow the
following operations to occur
Communication Off
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an external device (A/V Output
must be set to Always On)
• Output audio from a microphone...

Projector Information Display - Info Menu
You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu.
SelectVersion to display the projectors firmware version. Select Infoto display the settings described
below.
Note: Available settings depend on the current input source. The lamp usage timer does not register any
hours until you have used the lamp for at least 10 hours.
Information item Description
Lamp Hours Displays...

Information item
Description
Refresh Rate Displays the refresh rate of the current input source
Sync Info Displays information that may be needed by a service technician
Status Displays information about projector problems that may be needed
by a service technician
Serial Number Displays the projectors serial number
Event ID Displays the Event ID number corresponding to a specific projector
problem; see the list of Event ID codes
Event ID Code List
Parent topic: Adjusting the Menu Settings
Related...

Event ID code Cause and solution
0483
The EasyMP Network Projection program quit unexpectedly. Check the network
communication status, then turn the projector off and then on again.
04FE
0479 A projector system error has occurred. Turn the projector off and then on again.
04FF
0891 Cannot find an access point with the same SSID. Set your computer, access point,
and projector to the same SSID.
0892 The WPA/WPA2 authentication type does not match. Make sure the wireless
network security settings are...