Epson Projector BrightLink 536Wi User Manual

Solutions to Password Problems
If you cannot enter or remember a password, try the following solutions:
• You may have turned on password protection without first setting a password. Try entering 0000using
the remote control.
• If you have entered an incorrect password too many times and see a message displaying a request code, write down the code and contact Epson. Do not attempt to enter the password again. Provide
the request code and proof of ownership for assistance in unlocking the projector.
• If...

• If you are projecting from a laptop computer, make sure the battery has enough power, or connect the
laptop to a power outlet.
• If your USB cable is installed in the wall, try connecting a different USB cable to the projector and your computer.
Parent topic: Solving Interactive Problems
Related tasks
Connecting to a Computer for Pen Use or USB Mouse Control
Connecting to a Computer for USB Video and Audio
Solutions When Error Occurred in the Easy Interactive Function Message Appears If the Error...

• Make sure the
USB Type Boption on the Extended menu is set to Easy Interactive FunctionorUSB
Display/Easy Interactive Function.
• Make sure you have calibrated the system. Try recalibrating.
• Make sure the Pen ModeandPen Operation Mode settings are set correctly in the Easy Interactive
Function options on the Extended menu.
Parent topic: Solving Interactive Problems
Related concepts
Pen Calibration
Related references
Optional Equipment and Replacement Parts
Projector Setup Settings - Extended Menu...

• Press the
Pen Modebutton on the remote control to toggle between PC InteractiveandPC Free
Annotation modes.
Parent topic: Solving Interactive Problems
Related concepts
Pen Calibration
Related references
Projector Setup Settings - Extended Menu
Solutions When the Interactive Pen Position Is Not Accurate If the pen position is not the same as the mouse pointer, try the following solutions:
• Make sure you have calibrated the system. Try manual calibration.
• Try adjusting the pen operation area.
• If you...

• For the best performance, connect your computer to the projector using a VGA or HDMI cable for
display and the USB cable for interactivity.
• If you are using a computer, try setting your computers display to 1280 × 800.
• If you are using USB Display in Windows, you may need to disable Windows Aero in the Epson USB Display Settings program on your computer.
• If you are having difficulty double-clicking in OS X, go to the System Preferencesmenu, select
Mouse orTrackpad, and reduce the Double-Click...

• Make sure you set up the projector e-mail alert settings correctly on the projectors network Mail menu
or in the network software.
• Set the Standby Mode setting toCommunication On so the network software can monitor the
projector in standby mode.
Parent topic: Solving Network Problems
Related concepts
Wired Network Projection
Wireless Network Projection
Related references
Projector Setup Settings - Extended Menu
Projector Network Settings - Network Menu
Solutions When You Cannot Access the Projector...

Speak to a Support Representative
To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the
duration of your warranty period. You may also speak with a projector support specialist by dialing (562)
276-4394 (U.S.) or (905) 709-3839 (Canada).
Support hours are 6 AM to 8 PM, Pacific Time, Monday through Friday and 7 AM to 4 PM, Pacific Time,
Saturday.
Days and hours of support are subject to change without notice. Toll or long distance charges may
apply.
Before...

Technical Specifications
These sections list the technical specifications of your projector.
General Projector Specifications
Projector Lamp Specifications
Remote Control Specifications
Projector Dimension Specifications
Projector Electrical Specifications
Projector Environmental Specifications
Projector Safety and Approvals Specifications
Supported Video Display Formats
USB Display System Requirements
General Projector Specifications Type of display Poly-silicon TFT active matrix
Resolution 1280 × 800...

Image size
39 inches (0.99 m) to 116 inches (2.95 m)
(in native aspect ratio)
Projection distance 21.3 inches (0.54 m) to 48 inches (1.22 m)
(in native aspect ratio)
Projection methods Front, rear, ceiling-mounted
Optical aspect ratio 16:10
(width-to-height)
Focus adjustment Manual
Zoom adjustment Digital
Zoom ratio 1.0 to 1.35
(Tele-to-Wide)
Internal sound system 16 W monaural
Noise level 37 dB (Normal Power Consumption mode)
29 dB (ECO Power Consumption mode)
Keystone correction angle ± 7º vertical;...

Lamp life
Normal Power Consumption mode:
Up to about 5000 hours
ECO Power Consumption mode:
Up to about 10000 hours
Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
Parent topic: Technical Specifications
Remote Control Specifications Reception range 19.7 feet (6 m)
Batteries Two alkaline or manganese AA
Parent topic: Technical Specifications
Projector...