Epson Projector BrightLink 536Wi User Manual

Power consumption
Operating:
(100 to 120 V) Normal Power Consumption mode: 315 W
ECO Power Consumption mode: 230 W
Standby:
1.90 W (Networked Standby), 0.22 W (Energy Saving)
Power consumption Operating:
(220 to 240 V) Normal Power Consumption mode: 298 W
ECO Power Consumption mode: 221 W
Standby:
2.10 W (Networked Standby), 0.28 W (Energy Saving)
Parent topic: Technical Specifications
Projector Environmental Specifications Temperature Operating:
Up to 7500 ft (2286 m): 41 to 95 °F (5 to 35 °C)
7500 ft...

Canada
ICES-003 Class B
CSA C22.2 No. 60950-1-07
Parent topic: Technical Specifications
Supported Video Display Formats For best results, your computers monitor port or video card resolution should be set to display in the
projectors native resolution. However, your projector includes Epsons SizeWise chip that supports other
computer display resolutions, so your image will be resized to fit automatically.
Your computers monitor port or video card refresh rate (vertical frequency) must be compatible with...

Display format
Refresh rate (in Hz)Resolution (in pixels)
MAC16 75832 × 624
MAC19 751024 × 768
59 1024 × 768
MAC21 751152 × 870
Composite video
TV (NTSC) 60720 × 480
TV (SECAM) 50720 × 576
TV (PAL) 50/60720 × 576
Component video
SDTV (480i) 60720 × 480
SDTV (576i) 50720 × 576
SDTV (480p) 60720 × 480
SDTV (576p) 50720 × 576
HDTV (720p) 50/601280 × 720
HDTV (1080i) 50/601920 × 1080
HDMI input signals
VGA 60640 × 480
SVGA 60800 × 600
XGA 601024 × 768
WXGA 601280 × 800
60 1366 × 768
WXGA+ 601440 × 900
WXGA++...

Display format
Refresh rate (in Hz)Resolution (in pixels)
SXGA+ 601400 × 1050
UXGA 601600 × 1200
SDTV (480i/480p) 60720 × 480
SDTV (576i/576p) 50720 × 576
HDTV (720p) 50/601280 × 720
HDTV (1080i) 50/601920 × 1080
HDTV (1080p) 24/30/50/601920 × 1080
* Wide resolution only
Parent topic: Technical Specifications
USB Display System Requirements Your computer system must meet the system requirements here to use the projectors USB Display
software.
Requirement Windows Mac
Operating system Windows 2000 (Service...

Requirement Windows
Mac
CPU Mobile Pentium III 1.2 GHz or faster Power PC G4 1 GHz or faster (Core
(1.6 GHz or faster recommended) Duo 1.83 GHz or faster
recommended)
Memory 256MB or more (512MB or more 512MB or more
recommended)
Hard disk space 20MB or more
Display Resolution between 640 × 480 and Resolution between 640 × 480 and
1920 × 1200, 16-bit color or greater 1680 × 1200, 16-bit color or greater
Parent topic: Technical Specifications
205 

Notices
Check these sections for important notices about your projector.
Recycling
Important Safety Information
Important Safety Instructions
FCC Compliance Statement
Trademarks
Open Source Software License
Copyright Notice
Recycling Epson offers a recycling program for end of life products. Please go to this sitefor information on how to
return your products for proper disposal.
Parent topic: Notices
Important Safety Information Caution:Never look into the projector lens when the lamp is turned on; the...

Important Safety Instructions
Follow these safety instructions when setting up and using the projector:
• Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoidstanding in front of the projector so the bright light does not shine into your eyes.
• Do not place the projector on an unstable cart, stand, or table.
• Do not operate the projector on its side, or while tilted to one side. Do not tilt the projector more than 7° forward or back.
• If the projector is...

• Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially
flammable objects, near the projector. Never spill liquid of any kind into the projector.
• If you are using two or more projectors side-by-side, leave at least 2 feet (60 cm) of space between the projectors to allow for proper ventilation.
• You may need to clean the air filter and vent. A clogged air filter or vent can block ventilation needed to cool the projector. Do not use canned air, or the...

• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or
in direct sunlight for long periods of time. Doing so may cause damage to the case.
• Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not bring your hands or face close to the vents while projection is in progress. Do not bring your face close
to the projector while it is in use.
• Before you move the projector, make sure its power is turned off, the plug is...

Because this product was not intended for use in applications requiring extremely high reliability/safety
such as aerospace equipment, main communication equipment, nuclear power control equipment, or
medical equipment related to direct medical care, please make your own judgment on this products
suitability after a full evaluation.
Parent topic:
Important Safety Instructions
FCC Compliance Statement For United States Users
This equipment has been tested and found to comply with the limits for a Class B...