Epson Projector BrightLink 536Wi User Manual

2. Press the up or down arrow button to move through the menus listed on the left. The settings for
each menu are displayed on the right.
Note: The available settings depend on the current input source.
3. To change settings in the displayed menu, press Enter.
4. Press the up or down arrow button to move through the settings.
5. Change the settings using the buttons listed on the bottom of the menu screens.
6. To return all the menu settings to their default values, select Reset.
7. When you finish...

Setting
OptionsDescription
Color Mode See the list of available Color Adjusts the vividness of image
Modescolors for various image types
and environments
Brightness Varying levels available Lightens or darkens the overall
image
Contrast Varying levels available Adjusts the difference between
light and dark areas of the image
Color Saturation Varying levels available Adjusts the intensity of the image
colors
Tint Varying levels available Adjusts the balance of green to
magenta tones in the image
Sharpness...

Input Signal Settings - Signal Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to
customize the settings, you can use the Signal menu. The available settings depend on the currently
selected input source.
Note:You can restore the default settings of the Position,Tracking, and Syncsettings by pressing the
Auto button on the remote control.
To change settings for an input source, make sure the source is connected and select that source. Setting Options...

Setting
Options Description
Sync. Varying levels available Adjusts signal to eliminate
fuzziness or flickering in
computer images
Position Up, down, left, right Adjusts the image location on the
screen
Progressive Off Sets whether to convert
interlaced-to-progressive signals
Video
for certain video image types
Film/Auto Off: for fast-moving video images
Video: for most video images
Film/Auto: for movies, computer
graphics, and animation
Noise Reduction Off Reduces flickering in analog
images in two...

Setting
Options Description
Input Signal Auto Specifies the signal type from
input sources connected to
RGB
computer ports
Component Auto: detects signals
automatically
RGB: corrects color for
computer/RGB video inputs
Component: corrects color for
component video inputs
Video Signal Auto Specifies the signal type from the
input sources connected to the
Various video standards
video ports
Auto: detects signals
automatically
Aspect See the list of available aspect Sets the aspect ratio (width-to-
ratios...

Projector Feature Settings - Settings Menu
Options on the Settings menu let you customize various projector features.
Setting OptionsDescription
Keystone H/V KeystoneAdjusts image shape to
rectangular (horizontally and
Quick Corner
vertically)
H/V Keystone: lets you manually
correct horizontal and vertical
sides
Quick Corner: select to correct
image shape and alignment
using an on-screen display
Zoom Varying levels available Adjusts the size of the projected
image
146 

Setting
OptionsDescription
Control Panel Lock Full LockControls projector button locking
to secure the projector
Partial Lock
Full Lock: locks all buttons
Off
Partial Lock: locks all buttons
except the power button
Off: no buttons locked
Pointer Shape Three shapes availableChanges the shape of the remote
control pointer feature
Volume Varying levels available Adjusts the volume of projector’s
speaker system or external
speakers
Mic Input Level Varying levels available Adjusts the volume of the
projectors...

Setting
OptionsDescription
Pattern Pattern DisplaySelects various pattern display
options
Pattern Type
Pattern Display: lets you display
User Pattern
the selected pattern type on the
Test Pattern screen to aid in presentation
Pattern Type: selects the type of
grid or line pattern to display
User Pattern: captures a
projected screen and saves it as
a pattern for display
Test Pattern: displays a test
pattern to assist in focusing and
zooming the image and
correcting image shape
Parent topic: Adjusting the...

Easy Interactive Function Settings
Setting OptionsDescription
General
Auto Calibration —Auto CalibrationandManual
Calibration: start calibration for
Manual Calibration
pen operations
Pen Mode PC Free AnnotationSelects the mode for the
interactive pens
PC Interactive
Hovering OnTurns the pen hovering feature
on and off; when set toOn, the
Off
pointer follows the pen tip as you
hover it over the screen and
move it around
Advanced Distance of ProjectorsSelects various settings for
interactive features
Sync...

Setting
OptionsDescription
Pen Operation Mode Two Users/MouseSelects the operating system
version for pen operations
One User/Mouse
One User/MouseandTwo
One User/Pen
Users/Mouse: let you to perform
mouse operations using either
one or two interactive pens
One User/Pen: lets you use the
pen input and Ink features on
Windows Vista, Windows 7 and
Windows 8.x
Enable Right Click OnLets you use a long pen press as
a right-click operation when using
Off
mouse mode; available only
whenPen Operation Mode is
set...