Epson Projector BrightLink 536Wi User Manual

6. To show or hide the projection control toolbar, select the arrow.
Note: You can also show or hide the projection control toolbar from the projectors Display menu.
Parent topic: Interactive Modes
Drawing on a Projected Image (PC Free Annotation Mode) You can project from a computer, tablet, video device, or other source and add notes to your projected
content using the interactive pens. You can use either one pen or both pens at the same time.
Note:Make sure you use two pens with different colored ends...

You see the main toolbar on the side and the projection control toolbar on the bottom of the
projected image.
5. To move the main toolbar to the other side of the screen, tap the arrow on the opposite side of the screen.
Note: You can use the pen to move the arrow icon up or down to reposition the toolbar.
6. To switch to one of the other interactive modes, do one of the following: • To switch to whiteboard mode, select the Whiteboard tool.
• To switch to PC Interactive mode, select , then select .
Note:...

7. To close the main toolbar, select the icon at the bottom of the toolbar.
Note: If you want to hide the toolbar automatically after drawing, select the icon at the bottom of
the toolbar (the icon will change shape).
8. To show or hide the projection control toolbar, select the arrow.
Parent topic: Interactive Modes
Controlling Computer Features from a Projected Screen (PC Interactive Mode) You can navigate, select, and interact with your computer programs from the projected screen using the
interactive...

4. Select the
USB Type Bsetting and press the Enterbutton.
5. Select one of the following: •Easy Interactive Function to use PC Interactive mode.
• USB Display/Easy Interactive Function to use PC Interactive mode and USB Display.
• Wireless Mouse/USB Display to use the mouse and USB Display
6. Press the Escbutton to exit the USB Type B menu.
7. Select the Easy Interactive Function setting and press theEnterbutton.
114 

8. Select one of the following as the
Pen Operation Mode:
• Two Users/Mouse: Lets you use both interactive pens as a mouse with programs that support
two pens
• One User/Mouse: Lets you use one interactive pen as a mouse
• One User/Pen: Uses the Windows pen and ink feature (Windows 8.x, Windows 7, and Windows
Vista)
9. Press the Enterbutton on the remote control and press the Menubutton to exit the Extended menu.
10. Hover near or tap on the board or the projected image with the interactive pen.
The icon...

Note:
The Easy Interactive Driver must be installed and running to use Easy Interactive Tools on a Mac.
Requirement Windows Mac
Operating system Windows XP Professional, Home OS X 10.5.8, 10.6.x, 10.7.x, 10.8.x, Edition, and Tablet PC Edition (32-bit); 10.9.x, 10.10.x
except for Service Pack 1
Windows Vista Ultimate, Enterprise,
Business, Home Premium, and Home
Basic (32-bit)
Windows 8.x Pro, Enterprise, Windows 7
Ultimate, Enterprise, Professional, Home
Premium, and Home Basic (32- and 64-
bit)
CPU...

Note:
The pen turns off automatically after 20 minutes of inactivity. Tap the pen tip or press the button on
the side to turn the pen back on.
1 Pen tip
2 Battery light
3 Power/function button
4 Attachment for optional strap or cord
5 Battery cover
• To turn on the pen, tap the pen tip or press the power/function button. Note: If you press the button, the battery light flashes briefly, then turns off. If the battery is low, the
battery light flashes continuously.
117  

• For best performance, hold the pen perpendicular to the board, as shown below. Do not cover the
black section near the tip of the pen.
• To write or draw on the projection surface in annotation mode or whiteboard mode, do the following: • To select a projected item, such as an icon, tap the projection surface with the pen tip.
• To draw on the projected screen, tap the projection surface with the pen and drag it as necessary.
• To move the pointer, hover over the surface without touching it.
118   

• To use the pen as a mouse in PC Interactive mode, select the icon and do the following:
• To left-click, tap the board with the pen tip.
• To double-click, tap twice.
• To right-click, press the board with the pen for about 3 seconds.
• To click and drag, tap and drag with the pen.
• To move the cursor, hover over the board without touching it.Note: If you do not want to use the hovering feature, you can turn it off using the Easy Interactive
Function setting in the projectors Extended menu.
Parent...

Calibrating Automatically
Calibrating Manually
Parent topic:
Using the Interactive Pens
Calibrating Automatically You do not need the pens or a computer for Auto Calibration.
Note:You can start Auto Calibration by pressing the Userbutton on the remote control, by pressing and
holding the A/V Mutebutton on the projector for three seconds, or by pressing the Menubutton on the
remote control as described here.
1. Press the Menubutton, select the Extendedmenu, and press Enter.
120