Epson P5000 User Manual

							

191
Weight

(without
inkcartridges oroptional
 equipment)
 114.6
lb(52 kg)
 Parent
topic:Technical Specifications
 Electrical
Specifications
 Power
supply rating
 100
to240 V
 Rated
frequency range
 50/60
Hz
 Input
frequency range
 49.5/60.5
Hz
 Rated
current
 0.7
to0.4 A
 Power
consumption
 Printing:
52W(55 Wwith optional SpectroProofer installed)
 (ISO/IEC24712)

Sleep
mode: 5.0W
 Power
offmode: 0.5Worless
 Parent
topic:Technical Specifications
 Environmental
Specifications
 Temperature
 Operating:
50to95 °F (10 to35 °C)
 Operating
(recommended): 65to75 °F (18 to24 °C)
 Storage
(beforeunpacking): –4 to 140 °F (– 20 to60 °C)
 1
month at104 °F (40 °C)
 Storage
(afterunpacking): –4 to 104 °F (– 20 to40 °C)
 1
month at104 °F (40 °C)
 Humidity

(non-condensing)
 Operating:
20to80% RH
 Operating
(recommended): 45to60% RH
 Storage:
5to 85% RH
 Parent
topic:Technical Specifications 
						

							

192
Interface
Specifications
 USB
Interface
 Hi-Speed
USB-Compatible withtheUniversal SerialBus
 Specifications
Revision2.0
 Network
Interface
 10BASE-T/100BASE-TX
/1000BASE-T(useaCategory5/5e or
 higher
shielded twistedpaircable)
 Parent
topic:Technical Specifications
 Safety
andApprovals Specifications
 United
States
 Safety:
UL60950-1
 EMC:
FCCpart15Subpart Bclass B
 Canada
 Safety:
CAN/CSA C22.2No.60950-1
 EMC:
CAN/CSA-CEI/IEC CISPR22Class B
 Parent
topic:Technical Specifications 
						

							

193
Notices

Check
thesesections forimportant noticesaboutyourproduct.
 Note:
Epson offersarecycling programforend oflife Epson products. Pleasegotothis site (U.S) orthis
 site
(Canada) forinformation onhow toreturn yourEpson products forproper disposal.
 Important
SafetyInstructions
 FCC
Compliance Statement
 Trademarks

Copyright
Notice
 Important
SafetyInstructions
 Before
usingyourEpson product, readandfollow thesesafety instructions.
 General
ProductSafetyInstructions
 Ink
Cartridge SafetyInstructions
 Parent
topic:Notices
 General
Product SafetyInstructions
 •
Be sure tofollow allwarnings andinstructions markedonthe product.
 •
Do not attempt toservice thisproduct yourself.
 •
Use only thetype ofpower source indicated onthe products label.
 •
Use only thepower cordthatcomes withtheproduct. Useofanother cordmaycause firesorshock.
 Do
not use thecord withanyother equipment.
 •
Place theproduct nearawall outlet where theplug canbeeasily unplugged.
 •
Connect yourproduct toaproperly grounded poweroutlet.Avoidplugging theproduct intoanoutlet
 on
the same circuit asaphoto copier orair control system thatregularly switchesonand off,oron an
 outlet
controlled byawall switch ortimer.
 •
Do not letthe power cordbecome damaged orfrayed. Placeitto avoid abrasions, cuts,fraying,
 crimping,
andkinking. Donot place objects ontop ofitand donot allow itto be stepped onorrun over.
 Be
careful tokeep thecord straight ateach end.
 •
Ifyou useanextension cordwiththeproduct, makesurethetotal ampere ratingofthe devices
 plugged
intotheextension corddoes notexceed thecords ampere rating.Also,make surethetotal 
						

							

194
ampere
ratingofall devices plugged intothewall outlet doesnotexceed thewall outlets ampere
 rating.

•
Ifdamage occurstothe plug, replace thecord setorconsult aqualified electrician. Ifthere arefuses in
 the
plug, make sureyoureplace themwithfuses ofthe correct sizeandrating.
 •
Always turnoffthe product usingthepower button, andwait until thepower lightstops flashing before
 unplugging
theproduct orcutting offpower tothe electrical outlet.
 •
Ifyou willnot beusing theproduct foralong period, unplugthepower cordfrom theelectrical outlet.
 •
Place theproduct onaflat, stable surface thatextends beyonditsbase inall directions. Itwill not
 operate
properly ifitis tilted oratan angle.
 •
Avoid locations thataresubject torapid changes inheat orhumidity, shocksorvibrations, ordust.
 •
Do not place orstore theproduct outdoors.
 •
Do not place theproduct nearexcessive heatsources orindirect sunlight.
 •
Leave enough roomaround theproduct forsufficient ventilation. Donot block orcover openings inthe
 cabinet
orinsert objects through theslots.
 •
Keep theproduct awayfrompotential sourcesofelectromagnetic interference,suchasloudspeakers
 or
the base unitsofcordless telephones.
 •
When connecting theproduct toacomputer orother device withacable, ensure thecorrect
 orientation
ofthe connectors. Eachconnector hasonly onecorrect orientation. Insertingaconnector
 in
the wrong orientation maydamage bothdevices connected bythe cable.
 •
Do not putyour hands insidetheproduct ortouch theinkcartridges whileprinting.
 •
Do not move theprint head byhand; thismay damage theproduct.
 •
Do not spill liquid onthe product oruse theproduct withwethands.
 •
Do not use aerosol products thatcontain flammable gasesinsideoraround theproduct. Doingsomay
 cause
fire.
 •
Except asspecifically explainedinyour documentation, donot attempt toservice theproduct yourself.
 •
Unplug theproduct andrefer servicing toqualified servicepersonnel underthefollowing conditions: if
 the
power cordorplug isdamaged; ifliquid hasentered theproduct; ifthe product hasbeen dropped
 or
the cabinet damaged; ifthe product doesnotoperate normally orexhibits adistinct change in
 performance.
Adjustonlythose controls thatarecovered bythe operating instructions.
 •
When storing ortransporting theproduct, donot tiltit,stand iton itsside, orturn itupside down;
 otherwise
inkmay leak. 
						

							

195
Note:
Thelithium batteries inthis product containPerchlorate Material-special handling mayapply.
 Click
herefordetails.
 Parent
topic:Important SafetyInstructions
 Ink
Cartridge SafetyInstructions
 •
Keep inkcartridges outofthe reach ofchildren anddonot drink theink.
 •
Be careful whenyouhandle usedinkcartridges; theremaybeink remaining aroundtheinksupply
 port.
Ifink gets onyour skin, wash itoff with soap andwater. Ifitgets inyour eyes, flushthem
 immediately
withwater.
 •
Do not putyour hand inside theproduct ortouch anycartridges duringprinting.
 •
Install anew inkcartridge immediately afterremoving anexpended one.Leaving cartridges
 uninstalled
candryouttheprint head andmay prevent theproduct fromprinting.
 •
Install inkcartridges inall the inkcartridge slots.Youcannot printifany ofthe slots areempty.
 •
Dried inkonthe supply portmay cause inkleaks when thecartridge isreinserted andused. Wipeoff
 any
excess inkbefore reinserting.
 •
Do not insert orremove replacement cartridgesduringprinting.
 •
Do not remove thetransparent sealfrom theinksupply port.Thismay cause thecartridge tobecome
 unusable.

•
The green ICchip onthis inkcartridge retainsavariety ofcartridge-related information,suchasthe ink
 cartridge
status,sothat thecartridge mayberemoved andreinserted freely.Donot touch thegreen IC
 chip
onthe side ofthe cartridge. Thismay prevent normaloperation andprinting.
 •
Ifyou remove anink cartridge forlater use,protect theinksupply areafromdirtand dust andstore itin
 the
same environment asthe product. Notethatthere isavalve inthe inksupply port,making covers
 or
plugs unnecessary, butcare isneeded toprevent theinkfrom staining itemsthatthecartridge
 touches.
Donot touch theinkcartridge inksupply portorsurrounding area.
 •
To ensure printquality, useanink cartridge beforethedate printed onitspackage.
 •
Do not dismantle oralter anink cartridge. Thiscould damage theprint head andmay prevent the
 product
fromprinting.
 •
Do not drop cartridges orbump themagainst hardobjects; otherwise, theinkmay leak.
 •
Store inkcartridges atroom temperature inalocation thatisnot exposed todirect sunlight.
 •
After bringing anink cartridge insidefromacold storage site,allow itto warm upatroom temperature
 for
atleast fourhours before usingit. 
						

							

196
Parent
topic:Important SafetyInstructions
 FCC
Compliance Statement
 For
United StatesUsers
 This
equipment hasbeen tested andfound tocomply withthelimits foraClass Bdigital device, pursuant
 to
Part 15ofthe FCC Rules. Theselimitsaredesigned toprovide reasonable protectionagainstharmful
 interference
inaresidential installation. Thisequipment generates, uses,andcanradiate radio
 frequency
energyand,ifnot installed andused inaccordance withtheinstructions, maycause harmful
 interference
toradio ortelevision reception. However,thereisno guarantee thatinterference willnot
 occur
inaparticular installation. Ifthis equipment doescause interference toradio andtelevision
 reception,
whichcanbedetermined byturning theequipment offand on,theuser isencouraged totry to
 correct
theinterference byone ormore ofthe following measures:
 •
Reorient orrelocate thereceiving antenna.
 •
Increase theseparation betweentheequipment andreceiver.
 •
Connect theequipment intoanoutlet onacircuit different fromthattowhich thereceiver isconnected.
 •
Consult thedealer oran experienced radio/TVtechnician forhelp.
 WARNING

The
connection ofanon-shielded equipmentinterfacecabletothis equipment willinvalidate theFCC
 Certification
orDeclaration ofthis device andmay cause interference levelswhichexceed thelimits
 established
bythe FCC forthis equipment. Itis the responsibility ofthe user toobtain anduseashielded
 equipment
interfacecablewiththisdevice. Ifthis equipment hasmore thanoneinterface connector, do
 not
leave cables connected tounused interfaces. Changesormodifications notexpressly approvedby
 the
manufacturer couldvoidtheuser ’s authority tooperate theequipment.
 For
Canadian Users
 CAN
ICES-3(B)/NMB-3(B)
 Parent
topic:Notices
 Trademarks

EPSON
®
, SureColor ®
, PrecisionCore ®
, and SpectroProofer ®
are registered trademarks andEPSON
 Exceed
YourVision isaregistered logomarkofSeiko Epson Corporation.
 Epson
StoreSM
isaservice markofEpson America, Inc.
 Mac
andOSXare trademarks ofApple Inc.,registered inthe U.S. andother countries. 
						

							

197
General
Notice:Otherproduct namesusedherein areforidentification purposesonlyandmay be
 trademarks
oftheir respective owners.Epsondisclaims anyand allrights inthose marks.
 Parent
topic:Notices
 Copyright
Notice
 All
rights reserved. Nopart ofthis publication maybereproduced, storedinaretrieval system,or
 transmitted
inany form orby any means, electronic, mechanical, photocopying, recording,orotherwise,
 without
theprior written permission ofSeiko Epson Corporation. Theinformation containedhereinis
 designed
onlyforuse with thisEpson product. Epsonisnot responsible forany useofthis information as
 applied
toother products.
 Neither
SeikoEpson Corporation noritsaffiliates shallbeliable tothe purchaser ofthis product orthird
 parties
fordamages, losses,costs,orexpenses incurredbypurchaser orthird parties asaresult of:
 accident,
misuse,orabuse ofthis product orunauthorized modifications, repairs,oralterations tothis
 product,
or(excluding theU.S.) failure tostrictly comply withSeiko Epson Corporations operatingand
 maintenance
instructions.
 Seiko
Epson Corporation shallnotbeliable forany damages orproblems arisingfromtheuse ofany
 options
orany consumable productsotherthanthose designated asOriginal EpsonProducts orEpson
 Approved
ProductsbySeiko Epson Corporation.
 Seiko
Epson Corporation shallnotbeheld liable forany damage resulting fromelectromagnetic
 interference
thatoccurs fromtheuse ofany interface cablesotherthanthose designated asEpson
 approved
ProductsbySeiko Epson Corporation.
 This
information issubject tochange withoutnotice.
 A
Note Concerning Responsible UseofCopyrighted Materials
 Copyright
Attribution
 Parent
topic:Notices
 A
Note Concerning Responsible UseofCopyrighted Materials
 Epson
encourages eachusertobe responsible andrespectful ofthe copyright lawswhen usingany
 Epson
product. Whilesomecountries lawspermit limited copying orreuse ofcopyrighted materialin  
						

							

198
certain
circumstances, thosecircumstances maynotbeasbroad assome people assume. Contactyour
 legal
advisor forany questions regardingcopyrightlaw.
 Parent
topic:Copyright Notice
 Copyright
Attribution
 ©
2017 Epson America, Inc.
 5/17

CPD-52925R1

Parent
topic:Copyright Notice