Epson Aculaser M4000N User Manual

AcuLaser M4000 Series Users Guide
Using the Control Panel71
PS3 Menu
Error Sheet
When you select On, the printer prints out an error sheet when an error occurs in the PS3 mode or 
when the PDF file you tried to print is not a supported version.
Image Protect
When On is selected, the print quality is not reduced even with insufficient memory. In that case, 
Memory Overflow is displayed and the printing is stopped. 
When Off is selected, the print quality is reduced with insufficient memory. In that case,...

AcuLaser M4000 Series Users Guide
Using the Control Panel72
PDF Page Size
Specifies the paper size when you send the PDF file directory from a computer or some other 
device. If Auto is selected, the paper size is determined based on the size of the first page that is 
printed.
ESCP2 Menu
Item Settings (default in bold)
FontCourier, Prestige, Roman, Sans serif, Roman T, Orator S, Sans H, Script, OCR A, OCR B
Pitch10, 12, 15 cpi, Prop.
CondensedOff, On
T. Margin 0.40 ... 0.50 ... 1.50 inches in 0.05-inch...

AcuLaser M4000 Series Users Guide
Using the Control Panel73
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per 
inch). You can also choose proportional spacing.
Condensed
Turns condensed printing on or off.
T. Margin
Sets the distance from the top of the page to the baseline of the first printable line. The distance is 
measured in inches. The smaller the value, the closer the printable line is to the top.
Text
Sets the page...

AcuLaser M4000 Series Users Guide
Using the Control Panel74
Auto LF
If you select Off, the printer does not send an automatic line-feed (LF) command with each 
carriage-return (CR). If On is selected, a line-feed command is sent with each carriage-return. Select 
On if your text lines overlap.
Bit Image
The printer is able to emulate the graphics densities set with the printer commands. If you select 
Dark, the bit image density is high, and if you select Light, the bit image density is low.
If you...

AcuLaser M4000 Series Users Guide
Using the Control Panel75
FX Menu
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per 
inch). You can also choose proportional spacing.
Condensed
Turns condensed printing on or off.
T. Margin
Sets the distance from the top of the page to the baseline of the first printable line. The distance is 
measured in inches. The smaller the value, the closer the printable line is to the top.
Item...

AcuLaser M4000 Series Users Guide
Using the Control Panel76
Text
Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change 
the Orientation, Page Size, or T. Margin settings, the page length setting automatically returns to 
the default for each paper size.
CG Table
Use the character generator (CG) table option to select the graphics character table or the italics 
table. The graphics table contains graphic characters for printing lines, corners, shaded...

AcuLaser M4000 Series Users Guide
Using the Control Panel77
I239X Menu
The I239X mode emulates IBM® 2390/2391 Plus commands.
These settings are available only when the printer is in the I239X mode.
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per 
inch). You can also choose proportional spacing.
Code Page
Selects the character tables. Character tables contain the characters and symbols used by different 
languages. The...

AcuLaser M4000 Series Users Guide
Using the Control Panel78
Text
Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change 
the Orientation, Page Size, or T. Margin settings, the page length setting automatically returns to 
the default for each paper size.
Auto CR
Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever 
the printing position goes beyond the right margin. If this setting is off, the printer does not...

AcuLaser M4000 Series Users Guide
Using the Control Panel79
Password Config Menu
*The default password is blank. You can enter up to 20 characters for the password.
Password Config
Changes the password. Enter the old password first and then enter the new password twice.
To enter the password, press the dDown or uUp button to select the character and press the 
rEnter button to determine the character. After all characters are determined, press the OK 
button.
Limitation
Changes the restriction range....

AcuLaser M4000 Series Users Guide
Using the Control Panel80
Bookmark Menu
The bookmark menu appears by pressing the OK button while the LCD panel displays Ready or 
Sleep. 
In the bookmark menu, the bookmarked setting items are listed and you can select one of them. 
The following menus are bookmarked by default.
❏Reset Menu
❏MP Tray Size
❏System Information
To register the menus in bookmark, see “How to register menus as bookmarks” on page 54 for 
details.
Status and Error Messages
This section contains...