Epson Aculaser M4000N User Manual

AcuLaser M4000 Series Users Guide
Printing Tasks51
After you install EPSON Web-To-Page, the menu bar is displayed on the Microsoft Internet 
Explorer Toolbar. If it does not appear, select Toolbars from the View menu of Internet Explorer, 
and then select EPSON Web-To-Page.
Using the Reserve Job Function
This function allows you to store print jobs on the printer’s memory and to print them later directly 
from the printer’s control panel. You can prevent the printed document from being looked at by...

AcuLaser M4000 Series Users Guide
Printing Tasks52
Sending the print job
For Windows users
1. Click the Optional Settings tab, then click Reserve Job Settings. The Reserve Job Settings 
dialog box appears.
2. Select the Reserve Job On check box, then select Re-Print Job, Verify Job, Stored Job, or 
Confidential Job.
3. Enter a user name and job name in the corresponding text boxes. If you selected Confidential 
Job, enter a four-digit number in the password text box to set the password.
Note:
If you want...

AcuLaser M4000 Series Users Guide
Using the Control Panel53
Chapter 3 
Using the Control Panel
Using the Control Panel Menus
When to make control panel settings
In general, printer driver settings override settings made using the control panel.
You should make the following settings by using the control panel because these settings cannot be 
made in the printer driver.
❏Settings to select emulation modes and IES (Intelligent Emulation Switching) mode
❏Settings to specify a channel and configure the...

AcuLaser M4000 Series Users Guide
Using the Control Panel54
Use the uUp and dDown buttons to scroll through available settings, then press the rEnter 
button to select a setting and return to the previous level. Press the lBack button to return to 
the previous level without changing the setting.
Note:
❏You need to turn the printer off and then on to activate some settings. For details, see “Control Panel 
Menus” on page 55.
❏The OK button can be used instead of the rEnter button in step 3 or 5.
6. Press...

AcuLaser M4000 Series Users Guide
Using the Control Panel55
Control Panel Menus
Note:
Some menus and items appear only when a corresponding optional device is installed or an appropriate 
setting has been done.
Information Menu
Press the dDown or uUp button to select an item. Press the rEnter button to print a sheet or font 
sample.
*1 Available only when the jobs are stored by using the Quick Print Job feature.
*2 This item appears only when Form Overlay data exists.
*3 Available only when the...

AcuLaser M4000 Series Users Guide
Using the Control Panel56
Status Sheet, AUX Status Sheet
Prints a sheet showing the current printer settings and installed options. These sheets can be useful 
to confirm whether options have been installed correctly.
Reserve Job List
Prints a list of reserved print jobs stored on the printer’s memory.
Form Overlay List
Prints a list of the form overlays stored in the optional Hard Disk Drive.
Network Status Sheet
Prints a sheet showing the working status of the...

AcuLaser M4000 Series Users Guide
Using the Control Panel57
System Information Menu
The following information is displayed.
❏Main Version
❏MCU Version
❏Serial No
❏Memory
❏MAC Address
Tray Menu
*1 Automatic detection can be effective only for A4, A5, B5, LT, LGL, EXE, or GLG size paper.
*2 Available only when the optional paper cassette unit is installed.
*3 The settings are overridden by the settings made in the printer driver.
MP Tray Size
Select your paper size from this menu.
Cassette 1 Size/Cassette...

AcuLaser M4000 Series Users Guide
Using the Control Panel58
Emulation Menu
Note:
You can specify different emulations for each interfaces.
*Available only when an optional Type-B interface card is installed.
Printing Menu
Note:
The settings are overridden by the settings made in the printer driver.
*1Custom-size paper is 76.2 × 127.0 mm at the minimum and 215.9 × 355.6 mm at the maximum.
*2If Resolution is set to 1200, these settings are invalid even if set to On.
*3Not available in PCL mode.
*4Available...

AcuLaser M4000 Series Users Guide
Using the Control Panel59
Page Size
Specifies the paper size.
Wide A4
Selecting On decreases the left and right margins from 4 mm to 3.4 mm.
Orientation
Specifies whether the page is printed in portrait or landscape orientation.
Resolution
Specifies the printing resolution.
RITech
Turning RITech on produces smoother and crisper lines, text, and graphics.
Toner Save
When this setting is selected, the printer saves toner by substituting a gray shade for the black 
inside...

AcuLaser M4000 Series Users Guide
Using the Control Panel60
LeftOffset
Makes fine adjustments to the horizontal printing position of the page. This is useful for fine 
adjustments.
c
Caution:
Make sure that the printed image does not extend beyond the edge of the paper. Otherwise, you may 
damage the printer.
T Offset B
Adjusts the vertical printing position on the back of the paper when printing on both sides. Use this 
if the printout on the back is not where you expected.
L Offset B
Adjusts the...