Epson Aculaser M4000N User Manual

AcuLaser M4000 Series Users Guide
Contents11
Chapter 10  About the PCL6/PCL5 Printer Driver
About the PCL Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  193
Hardware requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  193...

AcuLaser M4000 Series Users Guide
Contents12
Appendix B  Customer Support
Contacting Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  207
Before Contacting Epson  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Help for Users in Australia  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Help for Users in Singapore . ....

AcuLaser M4000 Series Users Guide
Safety Instructions13
Safety Instructions
Safety
Warnings, Cautions, and Notes
w
Warnings
must be followed carefully to avoid bodily injury.
c
Cautions
must be observed to avoid damage to your equipment.
Notes 
contain important information and useful tips on the operation of your printer.
Safety precautions
Be sure to follow the precautions carefully to ensure safe and efficient operation:
❏Because the printer weighs approximately 24 kg (52.9 lb) with consumable...

AcuLaser M4000 Series Users Guide
Safety Instructions14
❏Be careful not to touch the fuser, which is marked CAUTION HOT SURFACE or CAUTION 
HIGH TEMPERATURE, or the surrounding areas. If the printer has been in use, the fuser and 
the surrounding areas may be very hot. If you must touch one of these areas, wait 30 minutes 
to allow the heat to subside before doing so.
a. CAUTION HOT SURFACE
b. CAUTION HIGH TEMPERATURE
❏Do not insert your hand deep into the fuser unit as some components are sharp and may...

AcuLaser M4000 Series Users Guide
Safety Instructions15
❏When removing the imaging cartridge, do not expose it to sunlight at all and avoid exposing it 
to room light for more than five minutes. The imaging cartridge contains a light-sensitive 
drum. Exposure to light can damage the drum, causing dark or light areas to appear on the 
printed page and reducing the service life of the drum. If you need to keep the imaging 
cartridge out of the printer for long periods, cover it with an opaque cloth.
❏Be...

AcuLaser M4000 Series Users Guide
Safety Instructions16
❏Use the type of power source indicated on the label. If you are not sure of the type of power 
available, consult your dealer or local power company.
❏When connecting this product to a computer or other device with a cable, ensure the correct 
orientation of the connectors. Each connector has only one correct orientation. Inserting a 
connector in the wrong orientation may damage both devices connected by the cable.
❏If you use an extension cord,...

AcuLaser M4000 Series Users Guide
Safety Instructions17
❏Adjust only those controls that are covered by the operating instructions. Improper adjustment 
of other controls may result in damage and may require repair by a qualified service 
representative.
Safety Information
Power cord
c
Caution:
❏Be sure the AC power cord meets the relevant local safety standards.
Use only the power cord that comes with this product. Use of the another cord may result in fire 
or electric shock.
This product’s power cord...

AcuLaser M4000 Series Users Guide
Safety Instructions18
Ozone safety
Ozone emission
Ozone gas is generated by laser printers as a by-product of the printing process. Ozone is produced 
only when the printer is printing.
Ozone exposure limit
The recommended exposure limit for ozone is 0.1 parts per million (ppm) expressed as an average 
time-weighted concentration over an eight (8) hour period.
The Epson laser printer generates less than 0.1 ppm for eight (8) hours of continuous printing.
Minimize the...

AcuLaser M4000 Series Users Guide
Getting to Know Your Printer19
Chapter 1 
Getting to Know Your Printer
Where to Find Information
Setup Guide
Provides you with information on assembling the printer and installing the printer software.
User’s Guide (this manual)
Provides you with detailed information on the printer’s functions, optional products, maintenance, 
troubleshooting, and technical specifications.
Network Guide
Provides network administrators with information on both the printer driver and...

AcuLaser M4000 Series Users Guide
Getting to Know Your Printer20
Printer Parts
Front view
a. face-down tray
b. top cover
c. control panel
d. right side cover
e. paper indicator
f. MP tray
g. standard lower paper cassette
h. power switch
i. paper support