Epson Aculaser M 2000 Service Manual

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 281
Confidential
Rear Right Cover + Rear Left Cover
1. Release two Tabs [1], remove the Connector Cover [2].
A1
B1
C1[1][2]
[1]
2. Remove four Screws [3], and remove the Rear Right Cover [4].
3. Remove three Screws [5], and remove the Rear Left Cover [6].
[6]
[5][5]
[3] [3]
[4]
4038F2C048DA 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 282
Confidential
Control Board (PWB-Z-PC)
1. Remove the Screw [1], and remove the Metal blanking plate [2].
2. Remove the Harness [4] from two Wire Saddles [3].
A2
[1] [2]
4039F2C054DA
[3][4]
4039F2C055DA
3. Remove all the Connectors on the Control Board.
4. Remove four Screws [5], and remove the Control Board [6].
4039F2C056DA
[5][5]
[6]
4039F2C057DA 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 283
Confidential
Paper Size Board (PWB-I-PC)
1. Remove the Screw [1], and remove the Metal blanking plate [2].
B2
[1] [2]
4039F2C054DA
2. Remove the Harness [4] from the Edge cover [3].
3. Remove three Screws [5], and remove the Control Board Assy [6].
[5]
[6]
4067F2C512DA
[3] [4]
4039F2C058DA 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 284
Confidential4. Remove two Claws [7] and the Connector [8], and remove the Paper Size Board Assy [9].
[7]
[8][9]
4067F2C513DA
5. Remove the Lever [10], and remove the Paper Size Board [11].
Be cautious for working not to deform the Lever parts.
4067F2C514DA[10]
[11] 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 285
Confidential
Lift-Up Motor (M3-PC)
1. Slide out the Optional Cassette.
2. Remove two Screws [1], and remove the Reinforcement plate [2].
C2
[1][2]
4038F2C165DA
3. Disconnect the Connector [3].
4. Remove three Screws [4], and remove the Lift-Up Motor [5].
[3]
[4] [5]
4038F2C166DA 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 286
Confidential4.3.16  Group 16CONTENT
DISASSEMBLY FLOWCHART
Parts/Units to be Disassembled
Guide
Paper Feed Motor (M1-PC)Vertical Transport Motor (M2-PC)
AB
Paper Feed Motor (M1-PC)
Vertical Transport Motor (M2-PC)
B
A
B1
A1
A2
B2
Start
Paper Feed Motor (M1-PC)
(P. 288)
Rear Right Cover + Rear Left Cover
(P. 287)
Vertical Transport Motor (M2-PC)
(P. 289) 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 287
Confidential
Rear Right Cover + Rear Left Cover
1. Release two Tabs [1], remove the Connector Cover [2].
A1
B1
[1][2]
[1]
2. Remove four Screws [3], and remove the Rear Right Cover [4].
3. Remove three Screws [5], and remove the Rear Left Cover [6].
[6]
[5][5]
[3] [3]
[4]
4038F2C048DA 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 288
Confidential
Paper Feed Motor (M1-PC)
1. Slide out the Optional Casset.
2. Remove two Screws [1], and remove the Reinforcement plate [2].
A2
[1][2]
4038F2C165DA
3. Remove the Harness of the Motor Assy [4] from five Wire Saddles [3].
4. Disconnect two Connectors [5].
[3][4] [5]
4038F2C167DA 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 289
Confidential5. Remove two Screws [6], and remove the Motor Assy [7].
6. Remove two Screws [8], and remove the Paper Feed Motor [9].
[6][7]
4038F2C168DA
[8]
[9]
Vertical Transport Motor (M2-PC)
1. Slide out the Optional Cassette.
2. Remove two Screws [1], and remove the Reinforcement plate [2].
B2
[1][2]
4038F2C165DA 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 290
Confidential3. Remove the Harness of the Motor Assy [4] from five Wire Saddles [3].
4. Disconnect two Connectors [5].
[3][4] [5]
4038F2C167DA
5. Remove two Screws [6], and remove the Motor Assy [7].
6. Remove two Screws [8], and remove the Vertical Transport Motor [9].
[6][7]
4038F2C168DA
[9]
[8]
4038F2C520DA