Epson Aculaser M 2000 Service Manual

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 261
ConfidentialDISASSEMBLY FLOWCHART
A4B1
A1
B2
A2
B3
A3
B4B5
Start
Right Rear Cover + Rear Cover
(P. 262)
High Voltage Unit (HV1)
(P. 262)
Front Door(P. 264)Right Door(P. 264)
Standard cassette
(P. 267)
Optional Cassette
(P. 268)
Near Empty Assy
(P. 269) 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 262
Confidential
Right Rear Cover + Rear Cover
1. Open the Right Door [1].
2. Remove three Screws [2], and remove the Right Rear Cover [3].
3. Remove nine Screws [4], and remove the Rear Cover [5].
A1
B1
[1]
[3] [2] [4][4] [4]
[5]
High Voltage Unit (HV1)
1. Disconnect four Connectors [1].
2. Remove five Screws [2] and the Tab [3], and remove the High Voltage Unit [4].
A2
B2
[1][2]
[3]
[4] 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 263
Confidential
Make sure following things when installing the High Voltage Unit (HV1).†
Terminal end surely contacts (Refer to Figure 1).
†
Tab [5] surely set up (Refer to Figure 2).
Terminal end position
4038F2C087DA
 Figure 1 Figure 2
†
Be cautious not to install the wrong Screw because two types of Screws [2] are 
used.  • M Mark: Screws for installing metallic parts (Space between thread is small).
  • P...

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 264
Confidential
Front Door
1. Open the Front Door.
2. Remove the Screw [1] each to remove the Right and Left Stoppers [2].
3. Pull out the Right and Left Pins [3] to remove the Front Door [4].
A3
[1] [4][2]
4038F2C038DB
[3]
4038F2C039DA
Right Door
1. Open the Right Door.
2. Remove three Screws [1], and remove the Reinforcement plate [2] of the right door and 
spring [3].
	

Remove the Spring with its...

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 265
Confidential3. Remove the Shoulder Screw [4].
4. Remove two Screws [5], and remove the Metal blanking plate [6].
[5]
[6]
[4]
4039F2C511DA
5. Remove two Screws [7] and remove the Rear Handle Assy Protect Cover [8].
6. Remove five Screws [9] and the Connector [10], and remove the Rear Handle Assy [11].
[9] [9] [10]
[11]
[9]
4039F2C513DA
[7]
[8] 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 266
Confidential7. Disconnect four Connectors [12].
8. Slide out the Paper Cassette 1.
[12][12] [12]
[12]
4039F2C514DA
9. Remove two Screws [13], and remove the Front Right Cover [14].
[14] [13]
[13]
4039F2C515DA 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 267
Confidential10.Remove the Screw [15], and remove the Shaft [16].
11.Remove the Right Door [17].
[15][17]
[16]
4039F2C516DA
Paper Cassette 1
1. Slide out the Standard Paper Cassette [1]. 
B3
[1] 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 268
Confidential2. Slide out the Standard Paper Cassette with pressing the Slide Locks [2] at both ends.
[2][2]
Optional Cassette
1. Slide out the Optional Cassette [1].
B4
[1] 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 269
Confidential2. Remove the Screw [2] and remove the Stopper [3].
3. Remove the Optional Cassette with while pressing the Slide Lock [4].
[3]
[4] [2]
Near Empty Assy
1. Pick up and remove the Actuator from the front side.
2. Remove the Screw [1] from the rear side.
B5
[1] 

EPSON AcuLaser C9200NRevision D
DISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 270
Confidential3. Put the Near Empty Assy [2] through the hole of the Flame bringing down the Near Empty 
[2] Assy to the rear side from the front side.
[2]
4.  Remove two Connectors and remove the Near Empty Assy.
When installing, insert the white Connector into the Connector of the front side [3] 
and insert the blue Connector into the Connector of the rear side [4].
[3]
[4]