Epson Aculaser M 2000 Service Manual

EPSON AcuLaser C9200NRevision D
ADJUSTMENT      Firmware Update 321
ConfidentialUPDATE METHOD 1†Required Tool
„Computer
„USB cable
„Firmware Update Tool†
Control Panel Special OperationRequired
Step
Explanation
LCD Panel
1
Print a Configuration Status Sheet, and check 
the current version.---
2
After turning the power off for both the 
printer and computer, connect them with a 
USB cable.
Before connecting the USB cable, 
make sure to disconnect other 
interface cables from the printer.---
3
Turn the...

EPSON AcuLaser C9200NRevision D
ADJUSTMENT      Firmware Update 322
Confidential8
When the program update is finished, the 
checksum will be indicated on the LCD. 
 
Confirm the checksum.
9
Turn the printer OFF and ON to reboot the 
printer.---
10
Print a Configuration Status Sheet. ---
11
Confirm that the program firmware version 
has been updated correctly by comparing the 
status sheet with that printed in step 1.---
Step
Explanation
LCD Panel 

EPSON AcuLaser C9200NRevision D
ADJUSTMENT      Firmware Update 323
ConfidentialUPDATE METHOD 2†Required Tool
„Computer
„USB cable
„Firmware Update Tool†
Control Panel Special OperationNot required
	

In this method, update can be executed with the EPSON 
Firmware Updater instead of Firmware Update Tool.
Step
Explanation
Panel display
1
Print a Configuration Status Sheet, and check 
the current version.---
2
Connect the printer to the computer with a 
USB cable. 
Confirm that the “Ready” is...

EPSON AcuLaser C9200NRevision D
ADJUSTMENT      Firmware Update 324
Confidential7
The data LED on the operation panel goes 
off, confirm that the “Ready” is displayed on 
the LCD, turn the printer OFF and ON to 
reboot the printer.
8
Print a Configuration Status Sheet. ---
9
Confirm that the program firmware version 
has been updated correctly by comparing the 
status sheet with that printed in step 1.---
Step
Explanation
Panel display
Ready 

EPSON AcuLaser C9200NRevision D
ADJUSTMENT      Firmware Update 325
ConfidentialUPDATE METHOD 3†Required Tool
„Computer
„USB cable
„Firmware Update Tool†
Control Panel Special OperationRequired
Step
Explanation
Panel display
1
Print a Configuration Status Sheet, and check 
the current version (MCU version).---
2
After turning the power off for both the 
printer and computer, connect them with a 
USB cable.
Before connecting the USB cable, 
make sure to disconnect other 
interface cables from the...

EPSON AcuLaser C9200NRevision D
ADJUSTMENT      Firmware Update 326
Confidential8
When the program update is finished, the 
checksum will be indicated on the LCD 
panel. 
Confirm the checksum.
9
Turn the printer OFF and ON to reboot the 
printer.
10
Print a Configuration Status Sheet. ---
11
Confirm that the program firmware version 
has been updated correctly by comparing the 
status sheet with that printed in step 1.---
Step
Explanation
Panel display 

EPSON AcuLaser C9200NRevision D
ADJUSTMENT      Firmware Update 327
ConfidentialUPDATE METHOD 4†Required Tool
„USB memory stick†
Control Panel Special OperationRequired
Step
Explanation
Panel display
1
Print a status sheet, and check the current 
version.---
2
Turn the printer OFF. ---
3
Insert the USB memory stick stored the 
firmware data file (RCX or EFU format) to 
the USB host I/F of the printer.
„Store the only firmware data 
file to update to the USB 
memory.„Store the firmware data to the 
root...

EPSON AcuLaser C9200NRevision D
ADJUSTMENT      Firmware Update 328
Confidential8
Updating the firmware is executed.
Do not turn the printer OFF 
during update. If aborted 
abnormally, the printer may not 
be booted.
9
When the update complete screen is 
displayed, turn the printer OFF and ON to 
reboot the printer.
10
Print a status sheet and confirm that the 
program firmware version has been updated.
---
Step
Explanation
Panel display
F/W Update Mode
F/W Update   :   XX%
Dont power off
Please WaitF/W...

EPSON AcuLaser C9200NRevision D
ADJUSTMENT      Firmware Update 329
ConfidentialUPDATE METHOD 5†Required Tool
„Computer
„USB cable
„Epson Firmware Updater†
Control Panel Special OperationNot required
	

Install the printer driver before using Epson Firmware 
Updater.
Step
Explanation
Program Screen
1
After turning the power off for both the 
printer and computer, connect them with 
a USB cable.
Before connecting the USB 
cable, make sure to disconnect 
other interface cables from the 
product....

EPSON AcuLaser C9200NRevision D
ADJUSTMENT      Firmware Update 330
Confidential8
Check the version of the firmware being 
updated and click [Next].
9
Read the notes concerning the update and 
click [Next]. 
Check “The status sheet is printed.” box if 
needed.
10
Update is started.
If “The status sheet is printed.” box is 
checked at Step 9, update is started after 
the status sheet is printed out.
11
After completing the update, reboot the 
printer automatically. 
When the screen on the right appears,...