Epson Aculaser CX28DN User Manual

10
10Maintenance
 

Maintaining the Machine 200
Maintaining the Machine
CAUTION
Read all caution and warning labels carefully, making sure to follow any 
instructions contained in them. These labels are located on the inside of 
the machine’s covers and the interior of the machine body.
Handle the machine with care to preserve its life. Abuse handling may cause 
damage and void your warranty. If dust and paper scraps remain on the 
inside or outside of the machine, machine performance and print quality will 
suffer, so the...

Maintaining the Machine 201
„Do not cover the machine immediately after using it. Turn it off and wait 
until it cools down.
„Do not leave the machine’s covers open for any length of time, especially 
in well-lit places; light may damage the toner cartridges.
„Do not open the machine during printing.
„Do not tap media stacks on the machine.
„Do not lubricate or disassemble the machine.
„Do not tilt the machine.
„Do not touch the electrical contacts, gears, or laser devices. Doing so may 
damage the...

Cleaning the Machine 202
Cleaning the Machine
CAUTION
Be sure to turn off the machine and unplug the power cord before 
cleaning.
Exterior
ba
„Control Panel
„Machine Exterior
„Original Cover Pad „Original Window (a)
Exposure Window (b)„Ventilation Grill
 

Cleaning the Machine 203 Media Rollers
The accumulation of paper dust and other debris on the media rollers can 
cause media-feeding problems. 
Cleaning the Media Feed Rollers (Manual Feed Tray)
1Open Tray 1.
2Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
 

Cleaning the Machine 204
3Clean the media feed rollers by 
wiping them with a soft, dry 
cloth.
4Close the tray.
 

Cleaning the Machine 205
Cleaning the Media Feed Rollers (Tray 2/3)
1Pull out the tray.
2Clean the media feed rollers by 
wiping them with a soft, dry 
cloth.
3Close the tray.
 

Cleaning the Machine 206
Cleaning the Media Transfer Rollers for Tray 3
1Open the right side cover of 
Tray 3.
Before opening the right 
side cover of Tray 3, fold 
up Tray 1.
2Clean the media transfer rollers 
by wiping them with a soft, dry 
cloth.
3Close the right side cover of 
Tray 3.
 

Cleaning the Machine 207
Cleaning the Media Feed Rollers for the ADF
1Open the ADF feed cover.
2Clean the media feed rollers by 
wiping them with a soft, dry 
cloth.
3Close the ADF feed cover.
 

Cleaning the Machine 208
Cleaning the Media Feed Rollers for the Duplex
1Pull the lever, and then open the 
right door.
Before opening the right 
door, fold up Tray 1.
2Clean the feed rollers by wiping 
them with a soft, dry cloth.
3Close the right door.