Epson AcuLaser C2800DN User Manual

							AcuLaser C2800 Series Users Guide
Using the Control Panel161
PCL Menu
These settings are available in the PCL mode.
*1Available only when downloaded fonts are available.
*2Depending on the font that has been selected.
*3Depending on whether Letter (60) or A4 (64) paper has been selected.
FontSource
Sets the default font source.
Font Number
Sets the default font number for the default font source. The available number depends on the 
settings you made.
Pitch
Specifies the default font pitch if the font is scalable and of fixed-pitch. You can select from 0.44 to 
99.99 cpi (characters per inch), in 0.01-cpi increments. This item may not appear depending on the 
Font Source or Font Number settings.
Item Settings (default in bold)
FontSourceResident, Download
*1, ROM A
Font Number0… 65535 (depending on your settings)
Pitch
*20.44 … 10.00 … 99.99 cpi in 0.01 cpi increment
Height
*24.00 … 12.00 … 999.75 pt in 0.25 pt increment
SymSetIBM-US, Roman-8, Roman-9, ECM94-1, 8859-2 ISO, 8859-9 ISO, 8859-10ISO, 8859-15ISO, 
PcBlt775, IBM-DN, PcMultiling, PcE.Europe, PcTk437, PcEur858, Pc1004, WiAnsi, WiE.Europe, 
WiTurkish, WiBALT, DeskTop, PsText, VeInternati, VeUS, MsPublishin, Math-8, PsMath, 
VeMath, PiFont, Legal, UK, ANSI ASCII, Swedis2, Italian, Spanish, German, Norweg1, 
French2, Windows, McText, Hebrew7, 8859-8 ISO, Hebrew8, Arabic8, OCR A, OCR B, 
Pc866Cyr, Pc866Ukr, WinCyr, ISOCyr, Pc8Grk, Pc851Grk, WinGrk, ISOGrk, Greek8, 
Pc862Heb, Pc864Ara, HPWARA
Form 5 … 60/64
*3 … 128 lines
CR FunctionCR, CR+LF
LF FunctionLF, CR+LF
Tray Assign4K, 5S, 4
 
						

							AcuLaser C2800 Series Users Guide
Using the Control Panel162
Height
Specifies the default font height if the font is scalable and proportional. You can select from 4.00 to 
999.75 points, in 0.25-point increments. This item may not appear depending on the Font Source 
or Font Number settings.
SymSet
Selects the default symbol set. If the font you selected in Font Source and Font Number is not 
available in the new SymSet setting, the Font Source and the Font Number settings are 
automatically replaced with the default value, IBM-US.
Form
Selects the number of lines for the selected paper size and orientation. This also causes a line 
spacing (VMI) change, and the new VMI value is stored in the printer. This means that later 
changes in the Page Size or Orientation settings cause changes in the Form value, based on the 
stored VMI.
CR Function, LF Function
These functions are included for users of particular operating systems, such as UNIX.
Tray Assign
Changes the assignment for the paper source select command. When 4 is selected, the commands 
are set as compatible with the HP LaserJet 4. When 4K is selected, the commands are set as 
compatible with the HP LaserJet 4000, 5000, and 8000. When 5S is selected, the commands are set 
as compatible with the HP LaserJet 5S.
 
						

							AcuLaser C2800 Series Users Guide
Using the Control Panel163
PS3 Menu
This menu allows you to make settings which affect the printer when it is in the PS3 mode.
*Available only when connected via Network interface.
Error Sheet
When you select On, the printer prints out an error sheet when an error occurs in the PS3 mode or 
when the PDF file you tried to print is not a supported version.
Coloration
Allows you to select the color printing or black-and-white printing mode.
Image Protect
The printer employs lossy compression when Off is selected. The printer does not employ lossy 
compression when On is selected. Lossy compression refers to a data compression technique in 
which some amount of data is lost.
Binary
Specifies the data format. Select On for the Binary data and select Off for the ASCII data.
When you select On, PDF formatted files which are transferred via network interface can be printed 
directly.
Note:
❏Binary can only be used with network connection.
❏You do not have to select On when using AppleTalk.
To use the Binary data, make sure your application supports Binary data and that SEND CTRL-D 
Before Each Job and SEND CTRL-D After Each Job are set to No.
Item Settings (default in bold)
Error SheetOff, On
ColorationColor, Mono
Image ProtectOff, On
Binary
*Off, On
Text DetectionOff, On
PDF Page SizeAuto, A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, DL, C5, IB5
 
						

							AcuLaser C2800 Series Users Guide
Using the Control Panel164
When this setting is set to On, you cannot use TBCP (Tagged binary communication protocol) in the 
printer driver settings.
Text Detection
When you select On, the text file is converted to a PostScript file when printing. This setting is 
available only when you select PS3 in the Emulation Menu.
PDF Page Size
Specifies the paper size when you send the PDF file directory from a computer or some other 
device. If Auto is selected, the paper size is determined based on the size of the first page that is 
printed.
ESCP2 Menu
This menu allows you to make settings which affect the printer when it is in the ESC/P 2 emulation 
mode.
* Depending on whether Letter (62) or A4 (66) paper has been selected. Item Settings (default in bold)
FontCourier, Prestige, Roman, Sans serif, Roman T, Orator S, Sans H, Script, OCR A, OCR B
Pitch10, 12, 15 cpi, Prop.
CondensedOff, On
T. Margin 0.40 ... 0.50 ... 1.50 inches in 0.05-inch increments
Text 1... 62/66*... 81 lines
CGTablePcUSA, Italic, PcMultilin, PcPortugue, PcCanFrenc, PcNordic, PcTurkish2, PcIcelandic, 
PcE.Europe, BpBRASCII, BpAbicomp, Roman-8, PcEur858, ISO Latin1, 8859-15ISO, PcSI437, 
PcTurkish1, 8859-9 ISO, Mazowia, CodeMJK, PcGk437, PcGk851, PcGk869, 8859-7 ISO, 
PcCy855, PcCy866, PcUkr866, PcLit771, Bulgarian, Hebrew7, Hebrew8, PcHe862, PcAr864, 
PcAr864Ara, PcAr720, PcLit774, Estonia, ISO Latin2, PcLat866
CountryUSA, France, Germany, UK, Denmark, Sweden, Italy, Spain1, Japan, Norway, Denmark2, 
Spain2, LatinAmeric, Korea, Legal
Auto CROn, Off
Auto LFOff, On
Bit ImageDark, Light, BarCode
ZeroChar0, (or the zero character with a slash)
 
						

							AcuLaser C2800 Series Users Guide
Using the Control Panel165
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per 
inch). You can also choose proportional spacing.
Condensed
Turns condensed printing on or off.
T. Margin
Sets the distance from the top of the page to the baseline of the first printable line. The distance is 
measured in inches. The smaller the value, the closer the printable line is to the top.
Text
Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change 
the Orientation, Page Size, or T. Margin settings, the page length setting automatically returns to 
the default for each paper size.
CG Table
Use the character generator (CG) table option to select the graphics character table or the italics 
table. The graphics table contains graphic characters for printing lines, corners, shaded areas, 
international characters, Greek characters, and mathematical symbols. If you select Italic, the 
upper half of the character table is defined as italic characters.
Country
Use this option to select one of the fifteen international symbol sets. See the Font Guide for samples 
of the characters in each country’s symbol set.
Auto CR
Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever 
the printing position goes beyond the right margin. If you select Off, the printer does not print any 
characters beyond the right margin and does not perform any line wrapping until it receives a 
carriage-return character. This function is handled automatically by most applications.
 
						

							AcuLaser C2800 Series Users Guide
Using the Control Panel166
Auto LF
If you select Off, the printer does not send an automatic line-feed (LF) command with each 
carriage-return (CR). If On is selected, a line-feed command is sent with each carriage-return. Select 
On if your text lines overlap.
Bit Image
The printer is able to emulate the graphics densities set with the printer commands. If you select 
Dark, the bit image density is high, and if you select Light, the bit image density is low.
If you select BarCode, the printer converts bit images to bar codes by automatically filling in any 
vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code 
reader. This mode will reduce the size of the image being printed, and may also cause some 
distortion when printing bit image graphics.
ZeroChar
Specifies whether the printer prints a slashed or unslashed zero.
 
						

							AcuLaser C2800 Series Users Guide
Using the Control Panel167
FX Menu
This menu allows you to make settings which affect the printer when it is in the FX emulation 
mode.
* Depending on whether Letter (62) or A4 (66) paper has been selected.
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per 
inch). You can also choose proportional spacing.
Condensed
Turns condensed printing on or off.
T. Margin
Sets the distance from the top of the page to the baseline of the first printable line. The distance is 
measured in inches. The smaller the value, the closer the printable line is to the top.
Item Settings (default in bold)
FontCourier, Prestige, Roman, Sans serif, Script, Orator S, OCR A, OCR B
Pitch10, 12, 15 cpi, Prop. 
CondensedOff, On
T. Margin 0.40 ... 0.50 ... 1.50 inches in 0.05-inch increments
Text 1... 62/66*... 81 lines
CGTablePcUSA, Italic, PcMultilin, PcPortugue, PcCanFrenc, PcNordic, PcTurkish2, PcIcelandic, 
PcE.Europe, BpBRASCII, BpAbicomp, Roman-8, PcEur858, ISO Latin1, 8859-15ISO
CountryUSA, France, Germany, UK, Denmark, Sweden, Italy, Spain1, Japan, Norway, Denmark2, 
Spain2, LatinAmeric
Auto CROn, Off
Auto LFOff, On
Bit ImageDark, Light, BarCode
ZeroChar0, (or the zero character with a slash)
 
						

							AcuLaser C2800 Series Users Guide
Using the Control Panel168
Text
Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change 
the Orientation, Page Size, or T. Margin settings, the page length setting automatically returns to 
the default for each paper size.
CG Table
Use the character generator (CG) table option to select the graphics character table or the italics 
table. The graphics table contains graphic characters for printing lines, corners, shaded areas, 
international characters, Greek characters, and mathematical symbols. If you select Italic, the 
upper half of the character table is defined as italic characters.
Country
Use this option to select one of the thirteen international symbol sets. See the Font Guide for samples 
of the characters in each country’s symbol set.
Auto CR
Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever 
the printing position goes beyond the right margin. If you select Off, the printer does not print any 
characters beyond the right margin and does not perform any line wrapping until it receives a 
carriage-return character. This function is handled automatically by most applications.
Auto LF
If you select Off, the printer does not send an automatic line-feed (LF) command with each 
carriage-return (CR). If On is selected, a line-feed command is sent with each carriage-return. Select 
On if your text lines overlap.
Bit Image
The printer is able to emulate the graphics densities set with the printer commands. If you select 
Dark, the bit image density is high, and if you select Light, the bit image density is low.
If you select BarCode, the printer converts bit images to bar codes by automatically filling in any 
vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code 
reader. This mode will reduce the size of the image being printed, and may also cause some 
distortion when printing bit image graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
 
						

							AcuLaser C2800 Series Users Guide
Using the Control Panel169
I239X Menu
The I239X mode emulates IBM® 2390/2391 Plus commands.
These settings are available only when the printer is in the I239X mode.
*1Depends on whether Letter (63) or A4 (67) paper has been selected.
*2Depends on whether Letter (1) or A4 (2) paper has been selected.
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per 
inch). You can also choose proportional spacing.
Code Page
Selects the character tables. Character tables contain the characters and symbols used by different 
languages. The printer prints text based on the selected character table.
T. Margin
Sets the distance from the top of the page to the baseline of the first printable line. The distance is 
measured in inches. The smaller the value, the closer the printable line is to the top.
Item Settings (default in bold)
FontCourier, Prestige, Gothic, Orator, Script, Presentor, Sans serif
Pitch10, 12, 15, 17, 20, 24 cpi, Prop.
Code Page437, 850, 858, 860, 863, 865
T. Margin 0.30 ... 0.40 ...1.50 inches in 0.05-inch increments
Text 1 ... 63/67
*1... 81 lines
Auto CROff, On
Auto LFOff, On
Alt. GraphicsOff, On
Bit ImageDark, Light
ZeroChar0, (or the zero character with a slash)
CharacterSet1
*2, 2*2
 
						

							AcuLaser C2800 Series Users Guide
Using the Control Panel170
Text
Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change 
the Orientation, Page Size, or T. Margin settings, the page length setting automatically returns to 
the default for each paper size.
Auto CR
Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever 
the printing position goes beyond the right margin. If this setting is off, the printer does not print 
any characters beyond the right margin and does not perform any line wrapping until it receives a 
carriage-return character. This function is handled automatically by most applications.
Auto LF
If you select Off, the printer does not send an automatic line-feed (LF) command with each 
carriage-return (CR). If On is selected, a line-feed command is sent with each carriage-return. Select 
On if your text lines overlap.
Alt.Graphics
Turns the Alternate Graphics option on or off.
Bit Image
The printer is able to emulate the graphics densities set with the printer commands. If you select 
Dark, the bit image density is high, and if you select Light, the bit image density is low.
If you select BarCode, the printer converts bit images to bar codes by automatically filling in any 
vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code 
reader. This mode will reduce the size of the image being printed, and may also cause some 
distortion when printing bit image graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
CharacterSet
Selects character table 1 or 2.