Epson AcuLaser C2800DN User Manual

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Macintosh131
Setting Up the USB Connection
Note:
If you are connecting the USB cable to your Macintosh through a USB hub, be sure to connect using the first 
hub in the chain. The USB interface may be unstable depending on the hub used. If you experience problems 
with this type of setup, connect the USB cable directly to your computer’s USB connector.
For Mac OS X users
1. Open the Applications folder on your hard drive, then open the Utilities folder and 
double-click the Printer Setup Utility (for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS 
X 10.2) icon.
2. Click Add Printer in the Printer List dialog box.
3. Select EPSON USB or USB from the pop-up menu. Select your printer icon in the Product list, 
then click Add.
4. Close Printer Setup Utility (for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS X 10.2).
e.OK button: Click this button to save the settings and to exit the dialog box.
f.Cancel button: Click this button to exit the dialog box without saving the 
settings.
g.Save button: Saves new changes and closes the dialog box.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Macintosh132
Canceling Printing
If the printouts are not what you expected and display incorrect or garbled characters or images, 
you may need to cancel printing. When a print job continues on the computer, follow the 
instruction below to cancel printing.
For Mac OS X users
Open Printer Setup Utility (for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS X 10.2) and 
double-click your printer from the print queue. Then, select Delete Job from the jobs menu.
Uninstalling the Printer Software
For Mac OS X users
1. Quit all applications on the computer.
2. Insert the EPSON printer software CD-ROM in your Macintosh.
3. Double-click the Printer Driver folder.
4. Double-click your printer’s icon.
Note:
If the Authorization dialog box appears, enter the Password or phrase, then click OK.
5. When the software license agreement screen appears, read the statement, then click Accept.
6. Select Uninstall from the menu at the upper left, then click Uninstall.
Follow the on-screen instructions.
 
						

							AcuLaser C2800 Series Users Guide
Using the Printer Software with Macintosh133
Sharing the Printer on a Network
Sharing the printer
This section describes how to share the printer on an AppleTalk network.
The computers on the network can share the printer that is directly connected to one of them. The 
computer that is directly connected to the printer is the print server, and the other computers are 
the clients which need permission to share the printer with the print server. The clients share the 
printer via the print server.
For Mac OS X users
Use the Printer Sharing setting, which is a standard feature of Mac OS X 10.2 or later.
See your operating system’s documentation for details.
 
						

							AcuLaser C2800 Series Users Guide
Using the PostScript Printer Driver134
Chapter 6 
Using the PostScript Printer Driver
About the PostScript 3 Mode
Hardware requirements
Your printer must meet the following hardware requirements to be able to use the PostScript 3 
printer driver.
Memory requirements for using the PostScript 3 printer driver are shown below. Install optional 
memory modules into your printer if the amount of memory currently installed does not meet your 
printing needs.
System requirements
Your computer must meet the following system requirements to be able to use the Adobe 
PostScript 3 printer driver.
For Windows
To use the Adobe PostScript 3 printer driver, your computer must be running Microsoft Windows 
Vista, Vista x64, XP, XP x64, or 2000. 
For Macintosh
Any Macintosh computer to which the printer is connected must be running Mac OS X ver. 10.2.8 
or later. See the following table for details.
Note:
To use the PostScript 3 printer driver with a USB interface, your computer must be Macintosh OSX 10.3.9 
or later.
Recommended memory
640 MB
(for duplex printing of image data in full color at Maximum)
 
						

							AcuLaser C2800 Series Users Guide
Using the PostScript Printer Driver135
Mac OS X
Note:
To use binary data, Epson recommends that you use AppleTalk for the printer’s network connection. If you 
use a protocol other than AppleTalk for the network connection, you need to set Binary to On in the 
PS3 Menu on the control panel. If you use the printer with a local connection, you cannot use binary data.
Using the PostScript Printer Driver with Windows
To print in the PostScript mode, you will have to install the printer driver. See the appropriate 
sections below for installation instructions according to the interface that you are using to print.
Installing the PostScript printer driver for the USB interface
Follow the steps below to install the PostScript printer driver for the USB interface.
c
Caution:
Never use EPSON Status Monitor and PostScript 3 driver at the same time when the printer is 
connected via a parallel port. It may damage the system.
Note:
❏Installing the printer software for Windows Vista, Vista x64, XP, XP x64, or 2000 may require 
administrator privileges. If you have problems, ask your administrator for more information.
❏Turn off all virus protection programs before installing the printer software.
1. Make sure that the printer is turned off. Insert the printer software CD-ROM into your 
CD-ROM drive.
2. Connect your computer to the printer with a USB cable, then turn on the printer.
Note for Windows Vista:
Without the Windows driver or the Adobe PS driver, the display shows Found New Hardware. In this 
case, click Ask me again later.
Minimum Recommended
ComputerPower Mac G3, G4, G5, iMac, eMac, PowerBook G3, G4, or iBook
Hard Disk—
Memory128 MB
 
						

							AcuLaser C2800 Series Users Guide
Using the PostScript Printer Driver136
3. For Windows 2000, click Start, point to Settings, and click Printers. Then double-click the Add 
Printer icon.
For Windows Vista, Vista x64, XP, or XP x64, click Start, point to Printer and Faxes, and click 
Add a printer in the Printer Tasks menu.
4. The Add Printer Wizard appears. Then click Next.
5. Select Local printer, then click Next.
Note:
Do not select the Automatically detect and install my Plug and Play printer check box.
6. Select USB as the port the printer is connected to, then click Next.
7. Click Have Disk and specify the following path for the CD-ROM. If your CD-ROM drive is D:, 
the path will be D:\ADOBEPS\ENGLISH\PS_SETUP
Then click OK.
Note:
Change the drive letter as needed for your system.
8. Select the printer, then click Next.
9. Follow the on-screen instructions for the rest of the installation.
10. When installation is done, click Finish.
 
						

							AcuLaser C2800 Series Users Guide
Using the PostScript Printer Driver137
Installing the PostScript printer driver for the network interface
See the appropriate sections below according to your operating system, and follow the instructions 
to install the PostScript printer driver for the network interface.
Note:
❏Set the network settings before installing the printer driver. Refer to the Network Guide that comes with 
your printer for details.
❏Turn off all virus protection programs before installing the printer software.
For Windows Vista, Vista x64, XP, XP x64, or 2000 users
1. Make sure that the printer is turned on. Insert the printer software CD-ROM into your 
CD-ROM drive.
2. For Windows Vista, Vista x64, XP, or XP x64, click Start, point to Printer and Faxes, and click 
Add a printer in the Printer Tasks menu.
For Windows 2000, click Start, point to Settings, and click Printers. Then double-click the Add 
Printer icon.
3. The Add Printer Wizard appears. Then click Next.
4. Select Local printer, then click Next.
Note:
Do not select the Automatically detect and install my Plug and Play printer check box.
5. Select the Create a new port check box and select Standard TCP/IP Port from the 
drop-down list. Click Next.
6. Click Next to continue.
7. Specify the IP address and port name, then click Next.
8. Click Finish.
9. Click Have Disk in the Add Printer Wizard and specify the following path for the CD-ROM. If 
your CD-ROM drive is D:, the path will be D:\ADOBEPS\ENGLISH\WIN2K_XP\PS_SETUP. 
Then click OK.
Note:
Change the drive letter as needed for your system.
10. Select the printer and click Next.
 
						

							AcuLaser C2800 Series Users Guide
Using the PostScript Printer Driver138
11. Follow the on-screen instructions for the rest of the installation.
12. When installation is done, click Finish.
Accessing the PostScript printer driver
You can access the PostScript printer driver directly from any application programs, from your 
Windows operating system.
The printer settings made from many Windows applications override the setting made when the 
printer driver is accessed from the operating system, so you should access the printer driver from 
your application to make sure that you get the result you want.
From the application
To access the printer driver, click the Print or Page Setup from the File menu. You also need to 
click Setup, Options, Properties, or a combination of these buttons.
For Windows Vista or Vista x64 users
To access the printer driver, click Start, click Control Panel, then double-click Printers.
For Windows XP or XP x64 users
To access the printer driver, click Start, click Printers and Faxes, then click Printers. Right-click 
your printer icon, then click Printing Preferences.
For Windows 2000 users
To access the printer driver, click Start, point to Settings, then click Printers. Right-click your 
printer icon, then click Printing Preferences.
 
						

							AcuLaser C2800 Series Users Guide
Using the PostScript Printer Driver139
Making changes to PostScript printer settings
You can change the PostScript printer settings in the PostScript printer driver. Online help is 
available to help you with the printer driver settings.
Using online help
If you want help on a particular item, click the “?” icon on the top-right corner of the dialog box’s 
title bar, then click the name of the setting that you want more information on. An explanation of 
the setting and its options will be displayed.
Using AppleTalk under Windows 2000
Use the following settings if your machine is running Windows 2000, and the printer is connected 
through an network interface using the AppleTalk protocol:
❏Use SelecType to set the Emulation Mode-Network item to PS3. Using the default Auto setting 
will cause an extra, unneeded page to be printed.
❏On the Device Settings sheet of the printer’s Properties dialog box, make sure that SEND 
CTRL-D Before Each Job and SEND CTRL-D After Each Job are set to No.
❏TBCP (Tagged binary communications protocol) cannot be used as the Output Protocol 
setting.
❏On the Job Settings sheet of the printer’s Properties dialog box, make sure to clear the Job 
Management On check box.
 
						

							AcuLaser C2800 Series Users Guide
Using the PostScript Printer Driver140
Using the PostScript Printer Driver with Macintosh
Installing the PostScript printer driver 
Follow the steps below to install the PostScript printer driver.
Note:
Make sure that no applications are running on your Macintosh before installing the printer driver.
For Mac OS X users
Note:
Make sure that Printer Setup Utility (for Mac OS X 10.3 and 10.4) or Print Center (for Mac OS X 10.2) 
is not open.
1. Insert the printer software CD-ROM into your CD-ROM drive.
2. Double-click the CD-ROM icon.
3. Double-click Mac OS X, then double-click PS Installer.
Note:
For Mac OS X 10.2, if the Authenticate window appears, enter the user name and password for an 
administrator.
4. The Install EPSON PostScript Software screen appears, click Continue, then follow the 
on-screen instructions.
5. Easy Install is displayed on the screen. Click Install.
Note:
For Mac OS X 10.3 and 10.4, if the Authenticate window appears, enter the user name and password for 
an administrator.
6. When installation is done, click Close.
Selecting the printer
After installing the PostScript 3 printer driver, you need to select the printer.