Epson 1761 W Manual
Here you can view all the pages of manual Epson 1761 W Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
The projector has the following enhanced security functions. •Password Protect You can limit who can use the projector. •Control Panel Lock You can prevent people changing the settings on the projector without permission.s "Restricting Operation (Control Panel Lock)" p.73 •Anti-Theft Lock The projector is equipped with the following anti-theft security device. s "Anti-Theft Lock" p.74 Managing Users (Password Protect) When Password...
Page 72
![Page 72
a
•If Password Protect is already activated, you must enter the
password.
If the password is entered correctly, the Password Protect
setting menu is displayed.
s "Entering the Password" p.72
•When the password is set, stick the supplied password protect
sticker in a visible position on the projector as a further theft
deterrent.
b
Select the type of Password Protect you want to set, and then
press the [
] button.
c
Select On, and then...](http://img.usermanuals.tech/thumb/23/104738/w300_1761-w-manual-1525096502_d-71.png "Page 72
a
•If Password Protect is already activated, you must enter the
password.
If the password is entered correctly, the Password Protect
setting menu is displayed.
s \"Entering the Password\" p.72
•When the password is set, stick the supplied password protect
sticker in a visible position on the projector as a further theft
deterrent.
b
Select the type of Password Protect you want to set, and then
press the [
] button.
c
Select On, and then...")
a •If Password Protect is already activated, you must enter the password. If the password is entered correctly, the Password Protect setting menu is displayed. s "Entering the Password" p.72 •When the password is set, stick the supplied password protect sticker in a visible position on the projector as a further theft deterrent. b Select the type of Password Protect you want to set, and then press the [ ] button. c Select On, and then...
Page 73
When you enter the correct password, Password Protect is temporarily released.Attention•If an incorrect password is entered three times in succession, the message "The projector's operation will be locked." is displayed for approximately five minutes, and then the projector switches to standby mode. If this happens, disconnect the power plug from the electrical outlet and then reinsert it and turn the projector's power back on....
Page 74
![Page 74
d
Select Yes when the confirmation message is displayed.
The control panel buttons are locked according to the setting you
chose.a
You can release the control panel lock by one of the following
two methods.
•Select Off from Control Panel Lock.
s Settings - Control Panel Lock p.82
•Press and hold down the [
] button on the control panel
for about seven seconds, a message is displayed and the lock
is released.
Anti-Theft Lock
As an anti-theft...](http://img.usermanuals.tech/thumb/23/104738/w300_1761-w-manual-1525096502_d-73.png "Page 74
d
Select Yes when the confirmation message is displayed.
The control panel buttons are locked according to the setting you
chose.a
You can release the control panel lock by one of the following
two methods.
•Select Off from Control Panel Lock.
s Settings - Control Panel Lock p.82
•Press and hold down the [
] button on the control panel
for about seven seconds, a message is displayed and the lock
is released.
Anti-Theft Lock
As an anti-theft...")
d Select Yes when the confirmation message is displayed. The control panel buttons are locked according to the setting you chose.a You can release the control panel lock by one of the following two methods. •Select Off from Control Panel Lock. s Settings - Control Panel Lock p.82 •Press and hold down the [ ] button on the control panel for about seven seconds, a message is displayed and the lock is released. Anti-Theft Lock As an anti-theft...
Page 75
Configuration Menu This chapter explains how to use the Configuration menu and its functions.
Page 76
![Page 76
This section explains how to use the Configuration menu.
Although steps are explained using the remote control as an example, you
can perform the same operations from the control panel. Check the guide
under the menu for the available buttons and their operations.a
Display the Configuration menu screen.
b
Select a top menu item.
c
Select a submenu item.
d
Change settings.
e
Press the [Menu] button to finish making settings.
Using the Configuration...](http://img.usermanuals.tech/thumb/23/104738/w300_1761-w-manual-1525096502_d-75.png "Page 76
This section explains how to use the Configuration menu.
Although steps are explained using the remote control as an example, you
can perform the same operations from the control panel. Check the guide
under the menu for the available buttons and their operations.a
Display the Configuration menu screen.
b
Select a top menu item.
c
Select a submenu item.
d
Change settings.
e
Press the [Menu] button to finish making settings.
Using the Configuration...")
This section explains how to use the Configuration menu. Although steps are explained using the remote control as an example, you can perform the same operations from the control panel. Check the guide under the menu for the available buttons and their operations.a Display the Configuration menu screen. b Select a top menu item. c Select a submenu item. d Change settings. e Press the [Menu] button to finish making settings. Using the Configuration...
Page 77
Configuration Menu Table Settable items vary depending on the model being used and the image signal and source being projected.Top Menu Name Submenu Name Items or Setting V alues Image menu s p.80Color Mode Dynamic, Presentation, Theatre, Photo, sRGB, Blackboard, Whiteboard, Customized, and DICOM SIM Brightness -24 to 24 Contrast -24 to 24 Color Saturation -32 to 32 Tint -32 to 32 Sharpness -5 to 5 Abs. Color Temp. 5000K to 10000K Color Adjustment R: -16...
Page 78
Top Menu Name Submenu Name Items or Setting V alues Projector ID Off, or 1 to 9 Multi-screen Adjustment Level, Brightness Correct., Color Correct. (G/R), and Color Correct. (B/Y) Language 15 or 35 languages *1 Info menu s p.94Lamp Hours - Source - Input Signal - Resolution - Video Signal - Refresh Rate - Sync Info - Status - Serial Number - Event ID - Reset menu s p.94Reset All - Reset Lamp Hours -*1 The number of supported languages differs depending on the...
Page 79
Top Menu Name Submenu Name Setting V alues AMX Device Discovery On and Off Bonjour On and Off Message Broadcasting On and Off List of Functions 79
Page 80
Image Menu Settable items vary depending on the image signal and source currently being projected. Setting details are saved for each image signal.s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.30Submenu Function Color ModeYou can select the quality of the image to suit your surroundings. s "Selecting the Projection Quality (Selecting Color Mode)" p.43 BrightnessYou can adjust the image brightness. ContrastYou can...