Epson 1761 W Manual

a
•When  Auto  H/V-Keystone is  set  to  On,  the  message  "Do  you
want  to  perform  Auto  H/V-Keystone  correction?"  is  displayed
when  the  projector  is  moved.  (EB-1776W  only)
After  you  perform  this  function,  the  Keystone setting  changes
from  Quick  Corner to  H/V-Keystone,  after  which  pressing
the  [
],  [
],  [
],  or  [
]  button  on  the  control  panel
performs  H/V-Keystone.
s Settings - Keystone - H/V-Keystone p.82
•If  the  [Esc]  button  is  held  down  for  about...

Adjusting  the  Horizontal  Tilt
Extend  and  retract  the  rear  feet  to  adjust  the  projector's  horizontal  tilt.A
Extend the rear foot.
B
Retract the rear foot.
Correcting  the  Focus
You can correct the focus using one of the following methods.
•Press  the  [Focus]  button  on  the  control  panel  or  the  remote  control  to
adjust  the  focus.  (EB-1776W  only)
•Turn  the  focus  ring  to  adjust  the  focus.  (EB-1771W/EB-1761W/EB-1751
only)
Adjusting  the  Volume
You  can  adjust  the...

•Adjust  the  volume  from  the  Configuration  menu.s
 Settings - Volume p.82
 Caution
Do  not  start  at  high  volume.
A  sudden  excessive  volume  may  cause  loss  of  hearing.  Always  lower  the  volume
before  powering  off,  so  that  you  can  power  on  and  then  gradually  increase  the
volume.
Selecting  the  Projection  Quality  (Selecting  Color  
Mode)
You  can  easily  obtain  the  optimum  image  quality  simply  by  selecting  the
setting  that  best  corresponds  to  your...

a
You  can  set  Color  Mode  from  the  Configuration  menu.
s Image - Color  Mode p.80
Setting  Auto  Iris
By  automatically  setting  the  luminance  according  to  the  brightness  of  the
displayed  image,  it  lets  you  enjoy  deep  and  rich  images.a
Press  the  [Menu]  button.s
 "Using  the  Configuration  Menu"  p.76Using the remote control Using the control panel
b
Select  Auto  Iris from  Image.
c
Select  On.
The  setting  is  stored  for  each  Color  Mode.
Adjusting Projected...

d
Press  the  [Menu]  button  to  finish  making  settings.a
Auto  Iris  can  be  set  only  when  the  Color  Mode is  Dynamic,
Theatre, or Customized.
Changing  the  Aspect  Ratio  of  the  Projected  Image
Change  the  
aspect
 ratio
g when  video  equipment  is  connected  so  that
images  that  have  been  recorded  in  digital  video  or  onto  DVDs  can  be
viewed  in  16:9  wide-screen  format.  Change  the  aspect  ratio  when  projecting
computer  images  at  full  size.
Available  Aspect...

A
Auto (only when the input source is HDMI)
B
4:3
*
C
16:9
* When  a  720p/1080i/1080p  signal  is  input,  the  display  is  in  a  zoomed  4:3  format
(the  image  is  cut  off  on  the  right  and  left  sides).
Changing  the  aspect  ratio  for  computer  images
For  EB-1776W/EB-1771W/EB-1761W
Each  time  the  button  is  pressed,  the  aspect  ratio  changes  in  the  order  of
Normal, 16:9, Full, Zoom, and Native.Aspect mode Input Signal
XGA 1024X768(4:3) WXGA 1280X800(16:10)
Normal16:9
Aspect mode...

Aspect mode Input Signal
XGA 1024X768(4:3) WXGA 1280X800(16:10)
4:316:9a
If  parts  of  the  image  are  missing,  set  the  Resolution setting  to  Wide
or  Normal from  the  Configuration  menu,  according  to  the  size  of  the
computer  panel.
s Signal - Resolution p.81
Adjusting Projected Images
47 

Useful  Functions
This  chapter  explains  useful  tips  for  giving presentations,  and  the  Security  functions. 

Projecting  Two  Images  Simultaneously  (Split  
Screen)  (EB-1776W/EB-1771W/EB-1761W  Only)
You  can  simultaneously  project  images  from  two  sources  on  the  right  and
left  of  the  screen.
Input  sources  for  split  screen  projection
The  combinations  of  input  sources  that can  be  projected  on  a  split  screen
are  listed  below.
Left Screen Right Screen
Comput‐
erVideo HDMI USB Dis‐
playUSB LAN
Computer -Video
-
HDMI
-
Left Screen Right Screen
Comput‐
erVideo HDMI USB Dis‐
playUSB...

b
Press  the  [Menu]  button.
The  Split  Screen  Setup  screen  is  displayed.
c
Select  the  Source, and then press the [
] button.
The  Source  screen  is  displayed.
d
Select  each  input  source  for  Left and  Right.Only  input  sources  that  can  be  combined  can  be  selected.s
 "Input  sources  for  split  screen  projection"  p.49
a
The  Source  screen  is  also  displayed  when  the  following  buttons
are  pressed  during  split  screen  projection.
•Source  Search  button
•Computer...