Epson 1761 W Manual

Signal  Menu
Settable  items  vary  depending  on  the  image  signal  and  source  currently
being  projected.  Setting  details  are  saved  for  each  image  signal.
You  cannot  make  settings  on  the  Signal  menu  when  the  source  is  USB
Display, USB, or LAN.s
 "Automatically  Detect  Input  Signals  and  Change  the  Projected  Image
(Source  Search)"  p.30Submenu Function
Auto SetupSet to On to automatically adjust the image to the optimum state
when the input signal changes....

Submenu Function
AspectYou can set the 
aspect
 ratio
g for projected images.
s "Changing the Aspect Ratio of the Projected Image" p.45
Overscan(This cannot be set when a digital RGB signal is input.)
Changes the output image ratio (the range of the projected
image). You can set the cropping range to Off, 4%, or 8%. When
the source is HDMI, Auto is available. When Auto is selected, it
automatically changes to Off or 8% according to the input signal.
Image Process‐
ingChanges settings for image...

Submenu Function
Split Screen
(EB-1776W/
EB-1771W/
EB-1761W only)You can split the screen into two screens.
You can change the Screen Size, and select the Source, Swap
Screens, Audio Source, and Exit Split Screen.
s "Projecting Two Images Simultaneously (Split Screen)
(EB-1776W/EB-1771W/EB-1761W Only)" p.49
Control Panel
LockYou can use this to restrict operation of the projector's control
panel.
s "Restricting Operation (Control Panel Lock)" p.73
Pointer ShapeYou can select the shape...

Extended  Menu
Submenu Function
DisplayYou  can  make  settings  related  to  the  projector's  display.
Messages: When set to Off,  the  following  items  will  not  be
displayed.
Item  names  when  the  Source,  Color  Mode,  or  Aspect  Ratio
is  changed,  messages  when  no  signal  is  being  input,  and
warnings  such  as  High  Temp  Warning.
Display  Background
*1:  You  can  set  the  screen  background
to  Black, Blue, or Logo when  no  image  signal  is  available.
Startup  Screen
*1: Set...

Submenu Function
Standby  ModeYou  can  use  network  monitoring  and  control  functions
while  the  projector  is  in  standby  mode  when  this  is  set  to
Communication  On.  (EB-1776W/EB-1771W/EB-1761W
only)
You  can  monitor  and  control  the  status  of  the  projector
over  the  network  by  using  
SNMP
g, or by using the
EasyMP  Monitor  software.
s "Useful  Software"  p.120 
USB  Type  BSet  to  USB  Display when  the  projector  and  a  computer  are
connected  by  a  USB  cable...

Network  Menu  (EB-1776W/EB-1771W/EB-1761W  
Only)
When  Network  Protect is  set  to  On in  Password  Protect,  a  message  is
displayed  and  the  network  settings  cannot  be  changed.  Set  Network  Protect
to  Off and  then  configure  the  network.s
 "Setting  Password  Protect"  p.71Submenu Function
Net.  Info.  -  Wire‐
less  LANDisplays  the  following  network  setting  status  information.
•Connection  Mode
•Antenna  Level
•Projector  Name
•SSID
•DHCP
•IP  Address
•Subnet  Mask...

Yes:  Saves  the  settings  and  exits  the  Network  menu.
No:  Does  not  save  the  settings  and  exits  the  Network  menu.
Cancel:  Continues  displaying  the  Network  menu.
Soft  keyboard  operations
The  Network  menu  contains  items  that  require  input  of  alphanumerics
during  setup.  In  this  case,  the  following  software  keyboard  is  displayed.  Use
the  [
],  [
],  [
],  and  [
]  buttons  on  the  remote  control  or
the  [
],  [
],  [
],  and  [
]  buttons  on  the  control...

Basic  menu
Submenu Function
Projector NameDisplays the projector name used to identify the projector when
connected to a network.
When editing, you can enter up to 16 single-byte alphanumeric
characters.
PJLink PasswordSet a password to use when you access the projector using
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
Web Control
PasswordSet a password to use when making settings and controlling the
projector using Web Control. Enter no more than eight...

Wireless  LAN  menu
Submenu Function
Wireless LAN
PowerTurn On when connecting the projector to the computer over
wireless LAN.
If you do not want to connect via wireless LAN, turn it Off to
prevent unauthorized access by others.
The default value is On.
Connection
ModeSet the connection mode to use when connecting the projector
and a computer via a wireless LAN.
If you select Quick, a small network is created automatically by
the projector and computer. It is used with EasyMP Network
Projection. If SSID...

Submenu Function
IP Settings(This item can only be set if Connection Mode is set to
Advanced.)
You can make network settings.
DHCP: Set to On to make network settings using 
DHCP
g. If this
is set to On, you cannot set any more addresses.
IP Address: You can input the 
IP address
g assigned to the
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to...