Epson 1761 W Manual

Switching  to  the  Target  Image  by  Remote  Control
You  can  change  directly  to  the  target  image  by  pressing  the  following
buttons  on  the  remote  control.
Remote control
A
Changes to images from the Computer port.
B
Each time the button is pressed, it cycles through the images being input
from the following sources.•Video  port
•HDMI  port
C
Each time the button is pressed, it cycles through the following images:•USB  Display
•Images  from  the  device  connected  to  the  USB  (TypeA)...

Amount  of  Memory
256  MB  or  more
Recommended:  512  MB  or  more
Hard  Disk  Space
20  MB  or  more
Display
Resolution  of  no  less  than  640x480  and  no  higher
than  1600x1200.
Display  color  in  16-bit  color  or  greater
*1Service  Pack  4  onlyFor  Mac  OS  XOS
Mac OS X 10.5.x 32 bit
Mac OS X 10.6.x 32/64 bit
Mac OS X 10.7.x 32/64 bit
CPU
Power PC G4 1GHz or faster
Recommended: Core Duo 1.83GHz or faster
Amount of Memory
512 MB or more
Hard Disk Space
20 MB or more
Display
Resolution of no...

When  disconnecting  the  USB  cable,  there  is  no  need  to  use  Safely
Remove  Hardware.a
•If  it  is  not  installed  automatically,  double-click  My  Computer
- EPSON_PJ_UD - EMP_UDSE.EXE on  your  computer.
•If  nothing  is  projected  for  some  reason,  click  All  Programs -
EPSON  Projector - Epson  USB  Display - Epson  USB
Display  Vx.xx on  your  computer.
•When  using  a  computer  running  Windows  2000  under  user
authority,  a  Windows  error  message  is  displayed  and  you  may...

For  Windows  Vista/Windows  7a
Click  Start, and then click Control  Panel.
b
Click  Uninstall  a  program under  Programs.
c
Select  Epson  USB  Display and  click  Uninstall.
For  Mac  OS  Xa
Open  the  Applications folder,  double-click  USB  Display, and then
double-click  Tool.
b
Run  USB  Display  UnInstaller.
Projecting Images
34 

Automatically  Adjust  to  Fit  into  the  Screen  Frame  
-  Screen  Fit  -  (EB-1776W  only)
Screen  Fit  is  a  function  that  corrects  the  projected  image  so  that  it  fits  to
the  frame  (border)  of  the  screen,  whiteboard,  and  so  on.  When  you  press
the  [Screen  Fit]  button  on  the  remote  control  or  control  panel,  the
projected  image  is  adjusted  to  fit  the  frame  of  the  screen  while  also
performing  keystone  correction  and  focus  adjustments.You  can  use...

b
Adjust the zoom ring so that the yellow frame is bigger than the
screen  frame  as  shown  below.  Position  the  black  message  box  in
the  center  of  the  screen.If  the  yellow  frame  is  still  within  the  screen  frame  even  after
adjusting  the  zoom  ring  to  its  maximum  size,  try  moving  the
projector  further  away  from  the  screen.
c
Press  the  [Screen  Fit]  button  or  the  [
] button.
After  the  adjustment  screen  appears,  the  projected  image  is  corrected
according  to...

a
•When  Screen  Fit  detects  more  than  two  sides  of  a  frame
inside  the  projection  area,  it  adjusts  to  fit  the  detected  frame.
For  example,  when  projecting  onto  a  wide  screen  in  a  small
room,  you  can  make  corrections  by  fitting  the  top  and  bottom
sides  of  the  screen  into  the  projected  area.•Screen  Fit  may  not  function  correctly  in  dark  rooms  such  as
rooms  with  the  lights  turned  off.  In  this  situation,  try
performing  Screen  Fit  again  after...

When  the  projector  is  moved,  it  displays  a  screen  for  adjustment  and  then
automatically  corrects  the  projected  image.
You  can  use  Auto  H/V-Keystone  to  correct  the  projected  image  under  the
following  conditions.
•Correction  angle:  approx.  20˚  right  and  left/approx.  30˚  up  and  downa
•Auto  H/V-Keystone  only  works  when  Projection is  set  to  Front
from  the  Configuration  menu.
s Extended - Projection p.84
•If  you  do  not  want  to  use  the  Auto  H/V-Keystone...

a
You  can  set  manual  H/V-Keystone  from  the  Configuration  menu.
s Settings - Keystone - H/V-Keystone p.82
Correcting  manually  -  Quick  Corner  -
This  allows  you  to  manually  correct each  of  the  four  corners  of  the
projected  image  separately.a
Press  the  [Menu]  button  while  projecting.s
 "Using  the  Configuration  Menu"  p.76
Using the remote control Using the control panel
b
Select  Keystone from  Settings.
c
Select  Quick  Corner,  and  then  press  the  [
] button.
d...

e
Using  the  [
],  [
],  [
],  and  [
]  buttons  on  the
remote  control,  or  the  [
],  [
],  [
],  and  [
]  buttons  on  the
control  panel,  correct  the  position  of  the  corner.
If  the  message  "Cannot  adjust  any  further."  is  displayed  while
adjusting,  you  cannot  adjust  the  shape  any  further  in  the  direction
indicated  by  the  gray  triangle.
f
Repeat  procedures  4  and  5  as  needed  to  adjust  any  remaining
corners.
g
When  you  are  done,  press  the  [Esc]...