Epson 1761 W Manual

Installation  Methods
The  projector  supports  the  following  four  different  projection  methods.
Install  the  projector  according  to  the  conditions  of  the  installation  location.
•Project  images  from  in  front  of
the  screen.  (Front  projection)
•Project  images  from  behind  a  
translucent  screen.  (Rear  projec‐
tion)
•Suspend  the  projector  from  the
ceiling  and  project  images  from
in  front  of  a  screen.  (Front/Ceil‐
ing  projection)
•Suspend  the  projector  from  the...

•Install  the  projector  so  that  it  is  parallel  to  the  screen.
If  the  projector  is  installed  at  an  angle  to  the  screen,  keystone  distortion
occurs  in  the  projected  image.•Place  the  projector  on  a  level  surface.
If  the  projector  is  tilted  the  projected  image  is  also  tilted.a
•See  the  following  if  you  cannot  install  the  projector  parallel  to  the
screen.
s "Correcting  Keystone  Distortion"  p.37
•See the following if you cannot install the...

For  EB-17514:3  Screen  Size
5m
50”80”100”150”
Installing the Projector
23 

This  section  gives  examples  of  how  to  connect  the  projector  and  the  projection  source.
The  port  name,  location,  and  connector  orientation  differ  depending  on  the  source  being  connected.
Connecting  a  Computer
To  project  images  from  a  computer,  connect  the  computer  using  one  of  the  following  methods.A
When using the supplied computer cable
Connect the computer's display output port to the projector's Computer port. You can output audio from the...

Connecting  Image  Sources
To  project  images  from  DVD  players  or  VHS  video  and  so  on,  connect  to  the  projector  using  one  of  the  following  methods.A
When using a commercially available video cable
Connect the video output port on the image source to the projector's Video port. You can output audio from the projector's speaker by connecting the audio output port on the video
equipment to the projector's Audio port using a commercially available audio cable.
B
When using the...

Connecting  USB  Devices
You  can  connect  devices  such  as  USB  memory,  the  optional  Document Camera, and USB compatible hard disks and digital cameras.
Using  the  USB  cable  supplied  with  the  USB  device,  connect  the  USB  device  to  the  USB  (TypeA)  port  on  the  projector.When  the  USB  device  is  connected,  you  can  project  files  on  the  USB  memory  or  digital  camera  using  Slideshow.s
 "Slideshow  examples"  p.53Attention•If you use a USB hub, the connection may...

Installing  the  Wireless  LAN  Unit
a
Remove  the  wireless  LAN  unit  cover.
b
Install  the  wireless  LAN  unit.
c
Attach  the  wireless  LAN  unit  cover,  and  then  turn  over  the
projector.
d
Secure  the  wireless  LAN  unit  cover  with  the  screw  supplied.
Connecting Equipment
27 

Basic  Usage
This  chapter  explains  how  to  project  and  adjust  images. 

From  Installation  to  Projection
This  section  explains  the  procedure  for  connecting  the  projector  to  a
computer  with  the  computer  cable  and  projecting  images.a
Connect  the  projector  to  an  electrical  outlet  with  the  power  cord.
b
Connect  the  projector  to  the  computer  with  the  computer  cable.
c
Turn  on  the  projector.
d
Open  the  A/V  mute  slide.
e
Turn  on  your  computer.
f
Change  the  computer's  screen  output.
When  using  a  laptop  computer,  you  need...

Automatically  Detect  Input  Signals  and  Change  
the  Projected  Image  (Source  Search)
Press  the  [Source  Search]  button  to  project  images  from  the  port  currently
receiving  an  image.
Using the remote control Using the control panel
HDMI
USB LAN USB Display
* LAN is only available for EB-1776W/EB-1771W/EB-1761W
When  two  or  more  image  sources  are  connected,  press  the  [Source  Search]
button  until  the  target  image  is  projected.
When  your  video  equipment  is  connected,...