Eiki Projector Lc Wxl200al User Manual

61

Setting
Key	lock
Key	lock
PIN	code	lock
This function locks the side control and remote control buttons 
to prevent operation by unauthorized persons.
  . . . . . .Unlocked.
  . . . . . .Lock the operation of the side control.
To unlock, use the remote control.
   . . . . . .Lock the operation of the remote 
control. To unlock, use the side control.
If the side control accidentally becomes locked and you do 
not have the remote control nearby or there is something 
wrong with your remote control,...

62

Setting
Use the Point ▲▼ buttons to select Off, On	1 or On	2. Press the 
SELECT button to close the dialog box.
Change	the	PIN	code	lock	setting
Enter	a	PIN	code
Use the Point ▲▼ buttons to enter a number. Press the Point ► 
button to fix the number and move the red frame pointer to the 
next box. The number changes to . If you fixed an incorrect 
number, use the Point ◄ button to move the pointer to the 
number you want to correct, and then enter the correct number.
Repeat this step to complete...

6

Shutter function is available to block out light to the screen, so that \
the screen can be used for the other presenters.
Prohibit the shutter operation from the remote control and the 
projector's side control.
Remote	control   . . 
Selecting On prohibits the shutter 
operation from the remote control.  
Projector. . . .       Selecting On prohibits the shutter   
operation from the side control.
It is possible to prohibit the shutter operation from both of the 
remote control and the...

64

When you want to make a digital processing of a projected 
image faster, set this function.
Use the Point ▲▼ buttons, select an item of Off/Low/Mid/High.
Digital processing speed becomes fast by order of Low → Mid → 
High. High is the fastest.
Video	delay	control
Fig .1
Note:
-The	following	functions	are	not	available	respectively	when	Video	delay
control	is	set	to	Low/Mid/High.
Low	...		Keystone	can	not	be	selected.
Mid	...			Progressive	and	Noise reduction	can	not	be	selected.
High	...	Keystone,...

65

This function returns all setting values except for User	logo, PIN	
code	lock, Logo	PIN	code	lock, Filter	timer and	Filter	counter	to 
the factory default settings.
Various test pattern are available for use when setting up the 
projector.
Filter replacement icon appears on the screen at a set time.
Note:
	 •	 Do	not	reset	the	counter	when	the	filter	or	the	filter	cartridge	is	not	replaced.	 •	 Timer	setting	notifies	that	the	filter	needs	replacement.	To	replace	the	filter,	use	the	filter	control...

66

Filter prevents dust from accumulating on the optical elements inside th\
e projector. Should the filter becomes clogged with 
dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life 
of the projector. This projector has an electrically operated filter which helps you to re\
place the filter easily. The projector 
monitors the condition of the filter at all time and replaces a filter w\
ith a new one automatically when it...

67

Turn off the projector, and unplug the AC power cord from the 
AC outlet.
First, clean up the dust on the projector and around the air 
vents.
1
2
Press ▼ downwards on the filter cover to release the latch 
and open the filter cover.
Put the new one back into the position and close the filter 
cover. Make sure that the filter cartridge is properly and fully 
inserted.
5
CAUTION
Make sure the filter cartridge is inserted in the projector. If 
the filter cartridge is not inserted, the projector...

6

Be sure to reset the Scroll counter after replacing the filter cartridge\
. 
Press the MENU button to display the On-Screen Menu. Use 
the Point ▲▼ buttons to select Setting and then press the 
Point ► or the SELECT button.
Use the Point ▲▼ buttons to select Filter	counter and 
then press the SELECT button. Use the Point ▲▼ buttons 
to select Scroll	counter	reset and then press the SELECT 
button. Scroll	counter	Reset?	appears. Select yes to 
continue.
1
2
Scroll	counter
Another...

69

Filter	counter	Reset? 
appears.
Select yes, then another 
confirmation box appears.
Scroll	counter	Reset?
 
appears.
Select  yes, then another 
confirmation box appears.
Turn off the projector and unplug the AC power cord. Let the 
projector cool for at least 45 minutes.
Loosen the screw and open the lamp cover. Loosen 3 screws 
of the lamp and pull out the lamp by using the built in handle.
1
Replace the lamp with a new one. Make sure that the lamp is 
properly and fully inserted. 
4
2
Connect...

70

Maintenance	and	Care
This projector uses a high-pressure lamp which must be handled carefully\
 and properly. 
Improper handling may result in accidents, injury, or create a fire hazard.
● Lamp  lifetime  may  differ  from  lamp  to  lamp  and  according  to  the  environment  of  use.  There  is  no 
guarantee  of  the  same  lifetime  for  each  lamp.  Some  lamps  may  fail  or  terminate  their  lifetime  in  a 
shorter period of time than other similar lamps.
● If the projector indicates that...