Eiki Projector Lc Wxl200al User Manual

41

Computer	Input
Image	adjust	MenuPress the MENU button to display the On-Screen Menu. 
Use the Point ▲▼ buttons to select Image	adjust and 
then press the Point ► or the SELECT button.
1
2Use the Point ▲▼ buttons to select the desired item 
and then press the SELECT button to display the 
adjustment dialog box. Use the Point ◄► buttons to 
adjust the setting value.
Note:
 When	White	balance	Red,	Green	or	Blue	is		
	adjusted,	Color temp.	will	change	to	Adj..
Press the Point ◄ button to decrease the...

42

Select the desired screen size that conforms to the input signal 
source.
SCREEN	MENU
1
2
Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Screen and then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons select the desired item and then press the SELECT button.
To reset the adjusted data, select Reset	and press the SELECT 
button. A confirmation box appears and then select yes. All 
adjustments will return to their previous figures. 
To store...

4

Computer	Input
Note:
 •	When	no	signal	is	detected,	Normal	is	set	automatically	and	the	Aspect	dialog	box	disappears.	 •	The	adjustable	range	for	Scale H/V	and	Position H/V	is	limited	depending	on	the	input	signal.
Custom	adj .Custom	adj .
Select Digital	zoom	+. The On-Screen Menu disappears and D .	zoom	
+  appears.  Press  the  SELECT  button  to  expand  the  image  size.  Use 
the Point ▲▼◄► buttons to pan the image. The Panning function can 
work only when the image is larger than the...

44

Computer	Input
This function is used to adjust keystone distortion of the  projected 
image. Use the Point ▲▼ buttons to choose the item you want to 
adjust.Keystone
This function returns all adjusted values to the factory default 
settings. Press the SELECT button at Reset to display a 
confirmation box. To reset, press the SELECT button at yes.
Ceiling	
Rear	
When this function is set to On, the picture will be top/bottom and 
left/right reversed. This function is used to project the image from a...

45

If the projector cannot reproduce proper video image, select a 
specific broadcast signal format from among PAL, SECAM, NTSC, 
NTSC	4 .4, PAL-M, and PAL-N.
The projector automatically detects an incoming video signal, and 
adjusts itself to optimize its performance.
When the Video System is 	105i,	100i	or	100p, select the 
system manually.
If the projector cannot reproduce proper video image, select a 
specific component video signal format from among 40i, 575i, 
40p,...

46

Normal picture level preset on the projector.
Picture level adjusted with fine tone.
User preset picture adjustment in the Image adjust Menu. (p.48)
Video	Input
Image	select	Menu
1
2
Press the MENU button to display the On-Screen Menu. Use 
the Point ▲▼ buttons to select Image	select and then press 
the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select the desired item and 
then press the SELECT button.
Image	Level	Selection
Menu	Operation
Standard
Cinema
Image	1–10
For viewing...

47

1
2
Press the Point ◄ button to decrease the contrast; press the Point 
► button to increase the contrast (from 0 to 63).
Press the Point ◄ button to decrease the brightness; press the 
Point ► button to increase the brightness (from 0 to 63).
Press the Point ◄ button to lighten red tone; press the Point ► 
button to deepen red tone (from 0 to 63).
Press the Point ◄ button to lighten green tone; press the Point ► 
button to deepen green tone (from 0 to 63).
Press the Point ◄ button to lighten blue...

4

Use  the  Point  ◄►  buttons  to  adjust  the  gamma  value  to  obtain  a 
better balance of contrast (from 0 to 15).
Press the Point ◄ button to decrease the sharpness of the image; 
press the Point ► button to increase the sharpness of the image 
(from 0 to 31).
An interlaced video signal can be displayed in progressive mode. 
Press the Point ◄► buttons to change the progressive scan mode.
 Off ...........  Progressive scan mode is Off.
 On ...........  Progressive scan mode is On .
 Film...

49

Video	Input
Custom	adj .
1
2
Press the MENU button to display the On-Screen Menu. Use 
the Point ▲▼ buttons to select Screen and then press the 
Point ► or the SELECT button
Use the Point ▲▼ buttons to select the desired item 
and then press the SELECT button.
Screen	Size	Adjustment
Note:
	 •	 When	no	signal	 is	detected,	Normal	is	 set	 automatically	and	the	 Aspect	dialog	box	disappears.	 •	 The	adjustable	range	for	Scale	H/V	and	Position	H/V	are	limited	depending	on	the	input	signal.	 •	Natural...

50

Video	Input
This function returns all adjusted values to the factory default 
settings. Press the SELECT button at Reset to display a 
confirmation box. To reset, press the SELECT button at “Yes.”
Ceiling	
Rear	
When this function is set to On, the picture will be top/bottom and 
left/right reversed. This function is used to project the image from a 
ceiling-mounted projector.
When this function is set to On, the picture will be left/right 
reversed. This function is used to project the image from...