Eiki Projector Lc Wb100 User Manual

41

Image Adjustment
1

Press	the	Point	◄	button	to	decrease	the	contrast;	press	
the	Point	
► 	button	to	increase	the	contrast	(from	0	to	63).
Press	 the	Point	◄	button	 to	decrease	 the	brightness;	 press		
the	Point	 ►	button	to	increase	the	brightness	(from	0	to	63).
Contrast
Brightness
Press	the	Point	◄	button	to	lighten	red	tone;	press	the	Point	
►	 button	to	deepen	red	tone	(from	0	to	63).
White balance (Red)
Press 	the 	Point 	◄	button 	to 	lighten 	green 	tone; 	press 	the	
Point	
►...

4

Use	the	Point	◄►	buttons	to	adjust	the	gamma	value	to	
obtain	a	better	balance	of	contrast	(from	0	to	15).
Gamma
Press	the	Point	◄ 	button	to	decrease	the	sharpness	of	the	
image;	press	the	Point	
► 	button	to	increase	the	sharpness	
of	the	image	(from	0	to	15).
Sharpness
An	interlaced	video	signal	can	be	displayed	in	progressive	
mode.	Select	one	of	the	following	options.
	 Off 	..........	Disabled.
	 L1 	.......... 	For	an	active	picture.
	 L2	.......... 	For	a	still	picture.
	 Film	...........

4

This	projector	has	the	picture	screen	resize	function,	which	enables	you	to	customize	the	image	size.
Screen Size Adjustment
Screen Menu
 0 0Off 0 0
Video Input
Normal
Provide	the	image	to	fit	the	screen	size	while	maintaining
the	aspect	ratio	of	input	signal.
Custom
Adjust	the	screen	scale	and	position	manually	with	this	
function.
Press	the	Point	►	button	at	
Custom 	and	the	Custom	is
displayed	on	the	screen,	you	can	use	the	Point	▲▼	buttons
to	choose	the	item	you	want	to	adjust.
	Scale H/V...

44

Language
The	language	used	in	the	On-Screen	Menu	is	available	in	
English,	German ,	French,	Italian,	Spanish ,	Portuguese ,	
Dutch,	Swedish ,	Finnish,	Polish,	Hungarian ,	Romanian,	
Russian,	Chinese,	Korean,	japanese 	and	Thai.
Setting Menu
Setting
Setting
1

This	projector	has	a	Setting	menu	that	allows	you	to	set	up	
the	other	various	functions	described	below.
Language
Menu position

Picture in PictureStandby mode                                          Network
Picture in...

45

Note:
	 •	Input search, Auto PC adj . 	and	Auto Keystone	
cannot	be	set	
Off 	at	the	same	time.	
	 •	Auto  Keystone 	corrects 	vertical 	distortion 	only, 	not	
correct	horizontal	distortion.
	 •	The 	
Auto  Keystone 	function 	cannot 	work 	when 	the	
Ceiling 	feature	is	set	On	in	the	Setting	menu	(p.50).
	 •	Perfect	correction	of	the	image	distortion	cannot	be	 ensured	with	the	 Auto	setup	function.	If	the	distortion	is	
not	corrected	properly	by	pressing	the	 AUTO	SETUP	
or	 AUTO	SET 	button,...

46

Keystone
This	function	is	used	to	store	or	reset	the	keystone	
correction	when	the	AC	power	cord	is	unplugged.	Use	the	
Point	
▲▼	buttons	to	switch	between	each	option.
	Store 	....... 	Keep	the	keystone	correction	even	when	the	
AC	power	cord	is	unplugged.
	Reset 	....... 	Release	 the	keystone	 correction	 when	the	AC	
power	cord	is	unplugged.
To	correct	keystone	distortion,	press	the	SELECT 	button.	
Keystone	appears	on	the	screen.	Use	the	Point	▲▼	
buttons	to	correct	keystone	distortion	(p.23)....

47

Logo (Logo and Logo PIN code lock settings)
Logo selectThis	function	 allows	you	to	customize	 the	screen	 logo	with	
Logo select ,	Capture,	Logo PIN code lock 	and	Logo PIN 
code change 	functions.
Note:
	 		When	
On 	is	 selected	 in	the	 Logo	 PIN	code	 lock	function,	
Logo	select	and	Capture	functions	cannot	be	selected.
Logo select
This 	function 	decides 	on 	the 	starting-up 	display 	from	
among	following	options.	
	User 	........ 	Show	the	image	you	captured.
	Default 	.... 	Show	the...

48

Capture
Capture
This	function	enables	you	to	capture	an	image	being	
projected	to	use	it	for	a	starting-up	display	or	interval	of	
presentations.
Select	
Capture	and	press	the	SELECT 	button.		
A 	confirmation	box	appears	and	select	 yes 	to	capture	the	
projected	image.
After	capturing	the	projected	image,	go	to	the	Logo	select	
function	and	set	it	to	
User .	Then	the	captured	image	will	be	
displayed	the	next	time	you	turn	on	the	projector.
To	cancel	the	capture	function,	select	 yes 	in	the...

4

Enter a Logo PIN code
Use	the	Point	▲▼	buttons	to	enter	a	number.	Press	the	
Point	
►	button	to	fix	the	number	and	move	the	red	frame	
pointer	to	the	next	box.	 The	number	changes	to	“
”.	If	
you	fixed	an	incorrect	number,	use	the	Point	
◄	button	to	
move	the	pointer	to	the	number	you	want	to	correct,	and	
then	enter	the	correct	number.
Repeat	this	step	to	complete	entering	a	four-digit	
number.
After	entering	the	four-digit	number,	move	the	pointer	to	
Set .	Press	the	SELECT 	button	so	that...

50

Ceiling 
Rear 
Ceiling
When	this	function	is	set	to	On,	the	picture	will	be	top/
bottom	and	left/right	reversed.	 This	function	is	used	to	
project	the	image	from	a	ceiling-mounted	projector.
Rear
When	this	function	is	set	to	On ,	the	picture	will	be	left/right	
reversed.	 This	function	is	used	to	project	the	image	from	
rear	of	the	screen.
Setting
HDMI setup
Picture in PictureStandby mode                                          Network
HDMI setup
This	function	is	only	used	for	HDMI	input	source....